Computational models for the mechanical behaviour of filament wound composite tanks for compressed hydrogen storage

Development of analytical and numerical design methods for filament wound composite tanks for hydrogen storage

Doctoral project Alexandru Nila

Doctoral project Amit Kumar Haldar

Doctoral project Arun Agrawal

Doctoral project Diederik Van Nuffel

Doctoral project Ivan Miskdjian

Doctoral project Javier Andres Calderon Tellez

Doctoral project Joachim Vanwalleghem

Doctoral project Kameswara Vepa

Doctoral project Mathijs Peeters

Doctoral project Milad Kiaee Darunkola

Doctoral project Peyman Zolgharnein

Doctoral project Siebe Spronk

Doctoral project Stefan Jacques

Doctoral project Tien Dung Dinh

Doctoral project Virginia Amfilochiou

Experimental characterization of fibres, yarns and textile materials in relevant manufacturing conditions

Experimental Study of the Damage Behaviour of Thermoplastic Glass/Polypropylene Laminates under In-Plane Tension Fatigue

Experimental Study of the Thermomechanical Properties of Polyamide-6 andPolyamide-6-Based Composites for Automotive Applications

Filament wound composite tanks for pressurized hydrogen storage: novel predictive simulation models and testing methods

Multi-Scale Strategies for Physics-Based Modelling of Elastic and Inelastic Behaviour of Short Fiber and Continuous Fiber Reinforced Composites

The mechanical response of protective materials and structures under multiple impulsive loads

4D X-ray micro-tomography investigation of water-induced swelling of wood fiberboards

Advanced Development and Integration of Constitutive Polymer Models within a Directly Embedded Multiscale Framework for Virtual Investigation of Damage in Unidirectional Composites

Design Framework and Multi-Level Mechanical Characterization for Tiled Composites in Bridge Decks

Doctoral project Arada Jamnongpipatkul

Doctoral project Eline Goossens

Doctoral project Florian Cougnon

Doctoral project Kate Duquesne

Doctoral project Lode Daelemans

Doctoral project Sara Kowsar

Doctoral project Wanzhao Li

Doctoral project Ziyuan Li

Elucidating the effects of particle size and surface chemistry on toughening mechanisms in nanoreinforced adhesives

Homogenisation approach for performant finite element simulations of textile material manufacturing processes

Mechanical phentotyping the orthopedic patient

Multi-level Modelling of the Mechanical Properties of Wood using the Theory of Composite Materials

Numerical analysis of tiled laminates

Redesigning nanocrystal synthesis: Critically evaluating the use of solvents and ligands

The role of the hip capsule in patient outcome after hip arthroplasty

AMCAE: Basic mechanical properties simulation of Additive Manufactured lightweight materials through CAE

A physics-based computationally efficient multi-scale model for prediction of damage mechanisms in composite laminates under multi-axial fatigue loads considering the effects of thermal residual stresses and manufacturing defects

Application of Functionally Graded Materials to Extra-Large Structures

Applied Structural Engineering of AM Materials for Ankle Foot Orthosis

Blast and fragment resistant Textile - BLASTEX

Characterization of the fatigue behaviour of fibre-reinforced plastics through accelerated fatigue tests of composite beams and plates with electromagnetic shakers

Combined numerical and experimental approach for the development, testing and analysis of thick adhesive joints in large wind turbine blades

COMFHY: Composite solutions for future hydrogen storage tanks

COMPOHEX - Composite Heat Exchangers

CompositeBoost

Composites

Composites

Design and analysis of the NVH behavior of lightweight panel and material systems using advanced CAE tools

Development and streamlined integration of 3D printing technologies to enable advanced medical treatment and its widespread application

Development of advanced micro-mechanical test methods for fibre reinforced polymer composites based on in-situ optical and electron microscopy

Development of a "stacked " solid-like shell element for the simulation of damage in large composite structures under dynamic loading conditions

Development of efficient topology optimization methods for thermoelastic structures made of additively manufactured anisotropic materials

Effective Structural Health Monitoring with Additive Manufacturing (eSHM)

Engine Breakthrough Components and Subsystems

Experimental and numerical study of the mechanical response of large glass facades subject to blast loading

Experimental and numerical study of the mechanical response of large glass facades under air blast loading

Experimental and numerical study of the slamming wave impact ondeformable composite structures

Experimental Characterisation and Model Development of the Thermomechanical Response of Notched Continuous Fibre Reinforced Thermoplastic Composites under Tension and Compression at Ambient and Elevated Temperature.

Experimental measurement of the mechanical behaviour of composite materials and hybrid materials subject to different types of impact loading

Experimentele en numerieke studie van gewikkelde composiet drukvaten voor waterstof opslag

FATHOM: REliPhysics-based fatigue design tool for matrix cracking and delamination in unidirectional and sandwich composites under multi-axial fatigue loads with arbitrary R-ratio: development, validation and finite element implementation

Filament wound composite tanks for pressurized hydrogen storage: Novel predictive simulation models and testing methods.

Filament wound composite tanks for pressurized hydrogen storage: Novel predictive simulation models and testing methods.

Industrial predictive CAE solutions and validations for nominal and as-manufactured strength of composite material systems

Integrated analysis and experimental verification of Kinematic Form Active Structures (KFAS) for architectural applications

Investigation to Local Defect Resonance (LDR) for Non-Destructive Evaluation of Composites: Experiment & Simulation

Linear electric actuator for fatigue characterization of materials in load configurations with (very) small force amplitudes

M3Strength: Efficient predictive modeling for composites strength

Material characterization and damage detection in layered media through the Ultrasonic Polar scan.

Materials for lightweight design- how to treat them right

Materials for lightweight design - how to treat them right 2.0

Measurement and analysis techniques for the evaluation and optimization of the quality and performance of bicycles and bicycle parts.

MOR4MDesign: Model Order Reduction for efficient Multi-scale, Multi-parameter, Milti-attribute and Multi-materials Design

Multi-scale modelling and characterization of fatigue damage in unidirectionally reinforced polymer composites under multi-axial and variable-amplitude loading

Recycling of end-of-life carbon fiber reinforced plastics

Recycling of end-of-life carbon fiber reinforced plastics

Single-Sided Ultrasonic Characterization of (Damaged) Composites having Mechanical and/or Geometrical Anisotropy

Study of performance parameters, quality and steering stability of Eddy Merckx racing

The acoustic polar scan: a novel sonic probe for the characterization of lightweight wood panels

The energy absorption assessment of composite structures for protection of civil engineering structures against blast loading

Training in VITRImers: high performance MAterials and Trainees for cutting-edge industrial applications

3D Light Trans

A new principle of wave energy converter

A novel method for acquiring biomechanically accurate kinematics: skin-based motion analysis

Automated NDT of Industrial Composite Parts by Enhanced Optical Infrared Thermography

Camera with high framerate and resolution, for use with optical measurement techniques

CompositeBoost

Design of hafnium oxide nanocrystals as computed tomography contrast agent for damage detection in high-end composites.

Elucidating the effects of particle size and surface chemistry on toughening mechanisms in nanoreinforced adhesives

ENCLOSE: An embedded network of sensors in composites for local sensing (Enclose)

Epoxy resin composites reinforced with functionalized electrospun nanofibres

Experimental analysis and characterisation of tiled laminates and sandwich panels: a new class of structurally robust building components

Fluid-structure interaction simulations of wind turbines with composite blades

Influence of packaging parameters and post-mortem treatment on the quality of packed, fresh meat

Localized stiffness identification method for layered composite materials based on inverse modeling of a coupled acoustic-structural three-dimensional finite element model and high resolution ultrasound optical measurements.

Mechanical and tribochemical energy dissipation process in structural composites applied for complex rolling-sliding contact conditions: on-line analysis by means of computer vision and material response on meso-scale

MoCCHa-CT: Model-coupled 4D-uCT for advanced material characterisation

Multiscale experimental and numerical characterisation of textile reinforcements for enhanced nano-interleaved composites

Multiscale experimental and numerical characterisation of textile reinforcements for enhanced nano-interleaved composites

Music instruments from new materials 

North-C-Blade

OptiWind - Serviceability optimisation of the next generation offshore wind turbines

Polymer Shear and COmpressive Property determination at Elevated strain rates

Self Sensing Composites

SEPOCOM: self-healing thermoset polymers and composites

Single-Sided Ultrasonic Characterization of (Damaged) Composites having Mechanical and/or Geometrical Anisotropy

Table top SEM with integrated in-situ micromechanical testing for fiber, polymer and composite materials

Modeling of the fatigue of composites damaged by impact.