Research Explorer

Your browser does not support JavaScript or JavaScript is not enabled. Without JavaScript some functions of this webapplication may be disabled or cause error messages. To enable JavaScript, please consult the manual of your browser or contact your system administrator.

Researcher

Guy Lagae

Publications & Research Data

Awards & Distinctions

89 Results

2009

Influence of web openings on failure by lateral-torsional buckling of cellular beams

Delphine SonckWesley VanlaereGuy LagaeRudy Van Impe

Instabilité des coques

Guy LagaeWesley Vanlaere

A2 Journal Article in TECHNIQUES DE L'INGENIEUR

Lateral-torsional and lateral-distortional buckling of I-section members with web openings

Delphine SonckJan BelisGuy LagaeWesley VanlaereRudy Van Impe

Stability of column-supported steel cylinders with engaged columns

Cornelia DoerichWesley VanlaereGuy LagaeJ. Michael Rotter

Stability of column-supported steel cylinders with engaged columns

Cornelia DoerichWesley VanlaereGuy LagaeJ Michael Rotter

Steel cylinders on local supports with rigid stiffeners

Wesley VanlaereCornelia DoerichGuy LagaeRudy Van Impe

Steel cylinders on local supports with rigid stiffeners

Wesley VanlaereCornelia DoerichGuy LagaeRudy Van Impe

The buckling behaviour of steel cylinders with engaged columns

Wesley VanlaereDelphine SonckDieter CallewaertRudy Van ImpeGuy Lagae

2008

Comparison of Numerically Determined Failure Loads of Liquid-Filled Conical Shells with Experimental Test Results

Wesley VanlaereGuy LagaeRudy Van Impe

Design of cold-formed steel purlins attached to roof sheeting based on Eurocode 3: Effect of gravity load

Kali KatnamRudy Van ImpeGuy LagaeMaarten De Strycker

A1 Journal Article in ADVANCES IN STRUCTURAL ENGINEERING

Early yielding of liquid-filled conical shells

Wesley VanlaereGuy LagaeRudy Van ImpeJan BelisDidier Delincé

Early yielding of liquid-filled conical shells

Wesley VanlaereGuy LagaeRudy Van ImpeJan BelisDidier Delincé

A1 Journal Article in INTERNATIONAL JOURNAL OF MODERN PHYSICS B

Liquid-filled conical shells supported from below

Guy LagaeW GUGGENBERGERWesley Vanlaere

Bookchapter in Buckling of Steel Shells : European Design Recommendations. 5th edition

Numerical study of imperfect liquid-filled conical shells - Verifying the present design rule

Wesley VanlaereGuy LagaeW GUGGENBERGERRudy Van Impe

2007

A theoretical numerical study of the rotational restraint in cold-formed steel single skin purlin-sheeting systems

Kali KatnamRudy Van ImpeGuy LagaeMaarten De Strycker

A1 Journal Article in COMPUTERS & STRUCTURES

Glued and preloaded bolted connections for laminated float glass

Dieter CallewaertJan BelisRudy Van ImpeGuy LagaeMatthieu De Beule

Local instability of stringer stiffened cylinders on local supports

Wesley VanlaereGuy LagaeRudy Van Impe

Modelling of cold-formed steel purlin-sheeting systems for estimating the rotational restraint

Kali Babu KatnamRudy Van ImpeGuy Lagae

Modelling of cold-formed steel sandwich purlin-sheeting systems to estimate the rotational restraint

Kali KatnamRudy Van ImpeGuy LagaeMaarten De Strycker

A1 Journal Article in THIN-WALLED STRUCTURES

Plastic Buckling of Conical Tanks with Large Geometrical Imperfections

Guy LagaeWesley VanlaereRudy Van Impe

Bookchapter in Hommages à René Maquoi

Refined test set-up for pure torsion of laminated glass

Dieter CallewaertJan BelisRudy Van ImpeGuy LagaeWesley Vanlaere

Residual stresses in TIG-welded I-beams. Experimental test-setup and validation of numerical model.

Maarten De StryckerPeter BuffelJan BelisChristof FimmersWesley VanlaereGuy Lagae

Stringer stiffened cylinders on local supports the plastic buckling behavior

Wesley VanlaereRudy Van ImpeGuy LagaeMaarten De Strycker

The Effect of Plasticity on the Structural Behavior of Locally Supported Cylinders

Wesley VanlaereRudy Van ImpeGuy Lagae

2006

Buckling of Stringer Stiffened Cylinders on Local Supports

Wesley VanlaereRudy Van ImpeGuy Lagae

Geometric Imperfections and Their Influence on the Ultimate Load of Thin-Walled, Cold-Formed Steel Purlins

M DE STRYCKERKali KatnamWesley VanlaereGuy LagaeRudy Van Impe

Influence of screw position on the load-bearing capacity of thin-walled, cold-formed steel purlins

Maarten De StryckerKali KatnamWesley VanlaereGuy LagaeRudy Van Impe

On the imperfections of cylindrical shells on local supports

Wesley VanlaereRudy Van ImpeGuy LagaeK KATNAMMatthieu De Beule

On the imperfections of cylindrical shells on local supports

Wesley VanlaereRudy Van ImpeGuy LagaeKali KatnamMatthieu De Beule

On the structural behaviour of elevated steel silos

Wesley VanlaereRudy Van ImpeGuy LagaeMaarten De Strycker

Plooigedrag van verstijfde cilinders op lokale steunpunten

Wesley VanlaereRudy Van ImpeGuy Lagae

Rotational restraint in cold-formed steel Z-profile purlin-sheeting systems: Finite element model

K KATNAMRudy Van ImpeGuy LagaeA DE BEULE

The Influence of Rotational Restraint on the Behaviour of Cold-Formed Steel Continuous Purlins Attached to Roof Sheeting

Kali KatnamM DE STRYCKERRudy Van ImpeGuy Lagae

The plastic buckling behavior of stringer stiffened cylinders on local supports

Wesley VanlaereRudy Van ImpeGuy LagaeMaarten De Strycker

2005

Design of Stringer Stiffeners for Cylindrical Shells on Local Supports

Guy LagaeWesley VanlaereRudy Van Impe

Effect of Gravity and Uplift Loads on Rotational Restraint in Cold-Formed Steel Z-Purlin-Sheeting Systems

Kali KatnamMaarten De StryckerRudy Van ImpeGuy Lagae

Effect of the yield stress on the buckling behaviour of stringer stiffened cylinders on local supports

Wesley VanlaereRudy Van ImpeGuy LagaePeter Buffel

Effect of varying the size of flatbar stiffeners on the buckling behaviour of thin cylinders on local supports

Wesley VanlaereRudy Van ImpeGuy LagaeT MAES

A1 Journal Article in STRUCTURAL ENGINEERING AND MECHANICS

Numerieke en experimentele studie van kraagliggers met veranderlijke hoogte belast aan hun tip

Peter BuffelGuy Lagae

On the boundary conditions for a finite element model for thin-walled, cold-formed steel purlins

Maarten De StryckerKali KatnamGuy LagaeRudy Van Impe

On the buckling behaviour of stringer stiffened cylinders on local supports

Wesley VanlaereRudy Van ImpeGuy LagaeMaarten De Strycker

Stringer stiffened cylinders on local supports - The search for a design rule

Wesley VanlaereGuy LagaeRudy Van ImpePeter Buffel

Ultimate load-bearing capacity of thin-walled, cold-formed steel purlins

Maarten De StryckerKali KatnamRudy Van ImpeGuy Lagae

2004

A design concept to avoid failure of structural glass beams in buildings

Jan BelisRudy Van ImpeMatthieu De BeuleGuy LagaeWesley Vanlaere

Design curve to use for lateral torsional buckling of tapered cantilever beams

Peter BuffelGuy LagaeRudy Van ImpeWesley VanlaereJan Belis

A1 Journal Article in ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2

Determination of elastic buckling loads for lateral torsional buckling of beams including contact

Peter BuffelGuy LagaeRudy Van ImpeWesley Vanlaere

Glass structures and plasticity: contradiction or future?

Jan BelisRudy Van ImpeWesley VanlaereGuy LagaePeter BuffelMatthieu De Beule

A1 Journal Article in ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2

Inclusion of real material behaviour in the numerical model for stringer stiffened cylinders

Wesley VanlaereRudy Van ImpeGuy LagaeJan BelisPeter BuffelMatthieu De Beule

A1 Journal Article in ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2

Neural networks for assessing the failure load of a construction

Wesley VanlaerePeter BuffelGuy LagaeRudy Van ImpeJan Belis

A1 Journal Article in JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS

Parametric Approach of Buckling of Load-bearing Glass Beams

Jan BelisRudy Van ImpeMatthieu De BeuleGuy Lagae

ROTATIONAL RESTRAINT IN COLD-FORMED STEEL Z-PROFILE PURLIN-SHEETING SYSTEMS: FINITE ELEMENT MODEL

Kali KatnamRudy Van ImpeGuy LagaeMatthieu De Beule

Stability approach of the dimensioning of glass beams

Jan BelisRudy Van ImpeBram De MeesterGuy LagaeKali Katnam

2003

Applicability of the EC3-rule "General Method for LTB of Frames" for Tip Loaded Cantilever Beams

Peter BuffelGuy LagaeRudy Van ImpeWesley VanlaereMatthieu De Beule

Boundary Conditions for Stringer Stiffened Cylindrical Shells on Local Supports

Wesley VanlaereGuy LagaeRudy Van ImpePeter BuffelJan BelisMatthieu De Beule

Confronting non-linear and evolutional numerical analyses of horizontally loaded piles embedded in soils with experimental results and the concept of safety

Rudy Van ImpeJan BelisPeter BuffelA DE BEULEGuy LagaeWesley Vanlaere

Confronting non-linear and evolutional numerical analyses of horizontally loaded piles embedded in soils with experimental results and the concept of safety

Rudy Van ImpeJan BelisPeter BuffelMatthieu De BeuleGuy LagaeWesley Vanlaere

Enhancement of the buckling strength of glass beams by means of lateral restraints

Jan BelisRudy Van ImpeGuy LagaeWesley Vanlaere

A1 Journal Article in STRUCTURAL ENGINEERING AND MECHANICS

Experimental and numerical study of buckling glass beams with 2m span

Jan BelisRudy Van ImpeMatthieu De BeuleGuy LagaeWesley Vanlaere

Finite Element Simulations of Lateral Torsional Buckling of Tapered Cantilever Beams

Peter BuffelGuy LagaeRudy Van ImpeWesley VanlaereMatthieu De Beule

Glazen liggers in gebouwen

Jan BelisRudy Van ImpeMatthieu De BeuleGuy LagaeWesley Vanlaere

Hyperbolic functions for modelling the elasto-plastic behaviour of soils in the evolutional, non-linear analysis of slurry walls and sheet-piling structures

Rudy Van ImpeJan BelisMatthieu De BeuleGuy LagaeWesley Vanlaere

Hyperbolic functions for modelling the elasto-plastic behaviour of soils in the evolutional, non-linear analysis of slurry walls and sheet-piling structures

Rudy Van ImpeJan BelisMatthieu De BeuleGuy LagaeWesley Vanlaere

Influence of Dimensions of Longitudinal Stiffeners on the Buckling Behaviour of Locally Supported Cylinders

Wesley VanlaereRudy Van ImpeGuy LagaeT MAES

Locale instabiliteit van discreet ondersteunde en verstijfde cilinderschalen

Wesley VanlaereGuy LagaeRudy Van ImpePeter BuffelJan BelisMatthieu De Beule

Modeling the glass beam

Jan BelisRudy Van ImpeWesley VanlaereMatthieu De BeuleGuy Lagae

Rethinking the Design of Liquid-Filled Conical Shells

Guy LagaeWesley VanlaereRudy Van ImpePeter BuffelJan BelisMatthieu De Beule

The influence of plasticity on the local buckling behaviour of a cylinder with discrete stringer stiffeners above local supports

Wesley VanlaereJan BelisPeter BuffelGuy LagaeRudy Van Impe

A1 Journal Article in ENGINEERING PLASTICITY FROM MACROSCALE TO NANOSCALE PTS 1 AND 2

The underestimated structural role of elastic joints in glass beam applications

Jan BelisRudy Van ImpeGuy LagaeWesley VanlaereMatthieu De Beule

Torsional behaviour of laminated glass beams with a varying interlayer stiffness

Matthieu De BeuleJan BelisRudy Van ImpeWesley VanlaereGuy Lagae

Torsional behaviour of laminated glass beams with a varying interlayer stiffness

Matthieu De BeuleJan BelisRudy Van ImpeWesley VanlaereGuy Lagae

2002

Comparison od design buckling stresses for liquid-filled cones obtained with two different procedures.

Guy LagaeRudy Van ImpePeter BuffelJan BelisWesley Vanlaere

Effect of axial force on torsion of thin-walled steel members by means of stability functions.

Rudy Van ImpeJan BelisPeter BuffelGuy LagaeWesley Vanlaere

Estimating the necessary section of I-beams with neural networks.

Wesley VanlaerePeter BuffelGuy LagaeRudy Van ImpeJan Belis

Neural networks for assessing the failure load of a construction.

Wesley VanlaerePeter BuffelGuy LagaeRudy Van ImpeJan Belis

The effects of torsion on the load-bearing capacity of single-pane glass beams

Jan BelisRudy Van ImpeF VernaillenGuy LagaeWesley Vanlaere

The use of lateral restraints to increase the load-bearing capacity of glass beams.

Jan BelisRudy Van ImpeGuy LagaeWesley VanlaerePeter Buffel

2001

Experimental Buckling Analysis of Cylinders with discrete stringer stiffeners above the local supports.

Rudy Van ImpeJan BelisPeter BuffelGuy Lagae

Glass and transparent plastics: a structural engineering point of view

Jan BelisRudy Van ImpeGuy LagaePeter Buffel

Influence of Additional Displacement Restraints by Overlap Tests of Purlin Systems

Peter BuffelRudy Van ImpeGuy LagaeJan Belis

Loadbearing Glass Constructions.

Jan BelisRudy Van ImpeGuy Lagae

Numerical stress analysis of the Fredericton Water tower collapse according to a proposed modified reference length in the ECCS rules for liquid-filled conical shells.

Jan BelisRudy Van ImpeGuy LagaePeter Buffel

Recent studies on conical water tanks.

Jan BelisRudy Van ImpeGuy Lagae

2000

Imperfection sensitivity of liquid filled, thin walled conical steel water towers and thanks with step-wise varying wall thickness. Numerical buckling analysis.

Rudy Van ImpeJan BelisGuy LagaePeter Buffel

1999

Nachweisformeln für axial belastete Kreiszylinderschalen auf diskreten Auflagerungen: Modelversuche als Hilfsmittel bei der Entwicklung

Guy LagaeJacques RathéRudy Van ImpePeter Buffel

A2 Journal Article in STAHLBAU

1997

Ontwerpregels voor het nazicht van het plooigevaar nabij de plaatselijke ondersteuningen van verticale stalen cilinderschalen

Guy LagaeJacques RathéRudy Van Impe

1995

Experimental investigation of local buckling of axially compressed steel cylinders on discrete supports, effects of reinforcement by means of a thicker bottom course

Rudy Van ImpeFilip DhanensGuy LagaeJacques Rathé

1994

Instabiliteit van cilinderschalen bij lokale krachtswerkingen

Filip DhanensGuy LagaeJacques RathéRudy Van Impe

1993

STRESSES IN AND BUCKLING OF UNSTIFFENED CYLINDERS SUBJECTED TO LOCAL AXIAL LOADS.

F DHANENSGuy LagaeJacques RathéR VANIMPE

A1 Journal Article in JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH

Design of Tanks for the Storage of OU and Water. ESDEP (European Steel Design Education Programme), ESDEP Volume 26, Structural Systems: Miscellaneous, Lecture 15C.1, 21p., 14 figg. (juli 1994).