Instellingen beheren
MENU
Over deze site
In English
Home
Onderzoekers
Projecten
Organisaties
Publicaties
Infrastructuur
Contact
Research Explorer
Uw browser ondersteunt geen JavaScript of JavaScript is niet ingeschakeld. Zonder JavaScript kan sommige functionaliteit van deze webapplicatie uitgeschakeld zijn of foutmeldingen veroorzaken. Raadpleeg om JavaScript in te schakelen de handleiding van uw browser of contacteer uw systeembeheerder.
Onderzoeker
Wim Van Paepegem
Profiel
Projecten
Publicaties
Activiteiten
Prijzen & Erkenningen
868
Resultaten
2024
A numerical multi-scale method for analyzing the rate-dependent and inelastic response of short fiber reinforced polymers : modeling framework and experimental validation
Hossein Ahmadi
Mohammad Hajikazemi
Daniele Finazzi
Yuriy Sinchuk
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2024
A smooth single-variable-based interpolation function for multi-material topology optimization
Tien Dung Dinh
Saeid Hedayatrasa
F. Bormann
M. Bosman
Wim Van Paepegem
U
Artikel in een tijdschrift
in
Engineering with Computers
2024
Experimental method for in-situ real-time measurement of mixed mode fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites
Mehdi Nikforooz
Olivier Verschatse
Lode Daelemans
Karen De Clerck
Wim Van Paepegem
U
Artikel in een tijdschrift
in
Composites Science and Technology
2024
Mixed experimental-numerical method for quantitative measurement of mode II fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites
Mehdi Nikforooz
Olivier Verschatse
Lode Daelemans
Karen De Clerck
Wim Van Paepegem
U
Artikel in een tijdschrift
in
Polymer Testing
2024
Near simultaneous multiple fragment impacts on aramid fabrics: Effects of velocity, dispersion and time intervals
Georgios Kechagiadakis
David Lecompte
Wim Van Paepegem
Frederik Coghe
Marc Pirlot
U
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
2024
Study of self-heating and local strain rate in polyamide-6 and short fibre glass/polyamide-6 under tension through synchronised full-field strain and temperature measurements
Daniele Finazzi
Yuriy Sinchuk
Ruben Sevenois
Lode Daelemans
Karen De Clerck
Gilles Robert
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2024
Study of the effect of defects on fatigue life prediction of additive manufactured Ti-6Al-4V by combined use of micro-computed tomography and fracture-mechanics-based simulation
Shiwei Han
Tien Dung Dinh
Ives De Baere
Matthieu Boone
Iván Josipovic
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF FATIGUE
2024
Thermomechanical characterisation of reprocessable, siloxane-based, glass-fibre-reinforced vitrimers
Virginia Amfilochiou
Tapas Debsharma
Ives De Baere
Lode Daelemans
Filip Du Prez
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2024
2023
An efficient multi-material topology optimization method for thermoelastic structures
Tien Dung Dinh
Saeid Hedayatrasa
Franz Bormann
Marko Bosman
Wim Van Paepegem
C3
Conferentie
2023
Characterizing pure polymers under high speed compression for the micromechanical prediction of unidirectional composites
Pei Hao
Siebe Spronk
Ruben Sevenois
Wim Van Paepegem
Francisco Antonio Gilabert Villegas
A1
Artikel in een tijdschrift
in
POLYMERS
2023
Closed-form analytical solutions for predicting stress transfers and thermo-elastic properties of short fiber composites
Ehsan Rashidinejad
Hossein Ahmadi
Mohammad Hajikazemi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
2023
Damage Imaging in Aircraft Composites by Nonlinear Elastic Wave (Modulation) Spectroscopy
Joost Segers
Saeid Hedayatrasa
Wim Van Paepegem
Mathias Kersemans
U
Conferentie
2023
Damage Imaging of Complex Structures with Guided Elastic Waves and Non-classical Nonlinearity
Yongcheng Liu
Dimitrios Chronopoulos
Reza Talemi
Wim Van Paepegem
Mathias Kersemans
U
Conferentie
2023
Damage characterization of multidirectional glass/polypropylene composite laminates in tension-tension fatigue
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
C3
Conferentie
2023
Design framework and multi-level mechanical characterization for tiled composites in bridge decks
Jordi Uyttersprot
Wouter De Corte
Wim Van Paepegem
Proefschrift
2023
Development of a versatile speckle pattern of nano-sized polymer particles for high-resolution SEM-DIC
Olivier Verschatse
Wim Van Paepegem
Karen De Clerck
Lode Daelemans
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2023
Diffusion-compensated correlation analysis of frequency-modulated thermal signal for quantitative infrared thermography
Saeid Hedayatrasa
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
2023
Enhanced thermographic inspection of woven fabric composites by k-space filtering
Gaétan Poelman
Saeid Hedayatrasa
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2023
Experimental and numerical fatigue damage characterization in multidirectional thermoplastic glass/polypropylene laminates based on in-situ damage observations
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2023
Experimental study of the damage behaviour of thermoplastic glass/polypropylene laminates under in-plane tension fatigue
Josef Sommer
Wim Van Paepegem
Mohammad Hajikazemi
Proefschrift
2023
Fatigue behaviour of thermoplastic glass/polypropylene composite cross-ply laminates : an experimental study with in-situ damage observations and numerical validation
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2023
Fatigue behaviour of thermoplastic glass/polypropylene composite cross-ply laminates: An experimental study with in-situ damage observations and numerical validation
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
U
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2023
Fatigue modeling of matrix cracking and delamination in multidirectional glass/polypropylene composite laminates
Mohammad Hajikazemi
Josef Sommer
Wim Van Paepegem
C3
Conferentie
2023
Fatigue of glass-thermoplastic composites
Wim Van Paepegem
Josef Sommer
Mohammad Hajikazemi
C3
Conferentie
2023
Inspecting Stiffened CFRP Aerospace Panels by Scanning Laser Doppler Vibrometry
Mathias Kersemans
Saeid Hedayatrasa
Wim Van Paepegem
U
Conferentie
2023
Inspection of CFRP Aircraft Components using Guided Wavefield Imaging in Wavenumber-Frequency domain
Mathias Kersemans
Joost Segers
Saeid Hedayatrasa
Wim Van Paepegem
U
Conferentie
2023
Integrated interval Mahalanobis classification system for the quality classification of turbine blades based on vibrational data incorporating measurement uncertainty
Liangliang Cheng
Vahid Yaghoubi Nasrabadi
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL
2023
Measurement of three-dimensional concentric and angular misalignment in static and fatigue testing of materials by stereo-digital image correlation
Shiwei Han
Tien Dung Dinh
Ives De Baere
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
EXPERIMENTAL MECHANICS
2023
Microstructure study of Ti-6Al-4V alloy by experiments and phase field models
Hao Xiang
Leo Kestens
Wim Van Paepegem
Proefschrift
2023
Modal parameter identification and comfort assessment of GFRP lightweight footbridges in relation to human–structure interaction
Jordi Uyttersprot
Wouter De Corte
Wim Van Paepegem
A2
Artikel in een tijdschrift
in
JOURNAL OF COMPOSITES SCIENCE
2023
Multi-scale strategies for physics-based modelling of elastic and inelastic behaviour of short fiber and continuous fiber reinforced composites
Hossein Ahmadi
Wim Van Paepegem
Mohammad Hajikazemi
Proefschrift
2023
Multiscale modelling of rate- and temperature-dependence for unidirectional thermoplastic composites
Pei Hao
Daniele Finazzi
Wim Van Paepegem
Francisco Antonio Gilabert Villegas
C3
Conferentie
2023
Phase-field simulation of martensitic transformation with different conditions in inhomogeneous polycrystals
Hao Xiang
Wim Van Paepegem
Leo Kestens
U
Artikel in een tijdschrift
in
COMPUTATIONAL MATERIALS SCIENCE
2023
Predicting the elasto-plastic response of short fiber reinforced composites using a computationally efficient multi-scale framework based on physical matrix properties
Hossein Ahmadi
Mohammad Hajikazemi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2023
Predicting the rate-dependent mechanical response of short fiber reinforced polymers
Hossein Ahmadi
Mohammad Hajikazemi
Yuriy Sinchuk
Wim Van Paepegem
C3
Conferentie
2023
Relation between ASTM E606 specimen geometry and misalignment in strain-controlled fatigue testing
Shiwei Han
Tien Dung Dinh
Ives De Baere
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF FATIGUE
2023
Resorcinol-derived vitrimers and their flax fiber-reinforced composites based on fast siloxane exchange
Tapas Debsharma
Stéphanie Engelen
Ives De Baere
Wim Van Paepegem
Filip Du Prez
A1
Artikel in een tijdschrift
in
MACROMOLECULAR RAPID COMMUNICATIONS
2023
Synergistic effects of microscale variabilities on the thermo-mechanical behavior of a UD CFRP ply
Subbareddy Daggumati
A. Sharma
Wim Van Paepegem
U
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
2023
Vibration-based quality assessment of metallic turbine blades considering measurement uncertainty
Liangliang Cheng
Wim Van Paepegem
Mathias Kersemans
P1
Conferentie
2023
2022
4D X-ray micro-tomography investigation of water-induced swelling of wood fiberboards
Pierre Kibleur
Jan Van den Bulcke
Joris Van Acker
Wim Van Paepegem
Proefschrift
2022
A computational study about the effects of ply cracking and delamination on the stiffness reduction of damaged lamina and laminate
Hossein Ahmadi
Mohammad Hajikazemi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
NTERNATIONAL JOURNAL OF DAMAGE MECHANICS
2022
A computationally efficient multi-scale strategy for predicting the elasto-plastic behaviour of short fiber composites
Hossein Ahmadi
Mohammad Hajikazemi
Ehsan Rashidinejad
Yuriy Sinchuk
Wim Van Paepegem
C3
Conferentie
2022
A computationally efficient multi-scale strategy for predicting the elasto-plastic behaviour of short fiber composites
Hossein Ahmadi
Mohammad Hajikazemi
Ehsan Rashidinejad
Yuriy Sinchuk
Wim Van Paepegem
C1
Conferentie
2022
A hierarchical multi-scale analytical approach for predicting the elastic behavior of short fiber reinforced polymers under triaxial and flexural loading conditions
Hossein Ahmadi
Mohammad Hajikazemi
Ehsan Rashidinejad
Yuriy Sinchuk
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2022
A multi-scale approach to include microstructural details in the analysis of short fibre composites under in-plane, out-of-plane and flexural loads
Hossein Ahmadi
Daniele Finazzi
Ehsan Rashidinejad
Yuriy Sinchuk
Ruben Sevenois
Mohammad Hajikazemi
Wim Van Paepegem
C3
Conferentie
2022
A new virtual fiber modeling approach to predict the kinematic and mechanical behavior of through-thickness fabric compression
Lode Daelemans
Tien Dung Dinh
Baris Caglar
Véronique Michaud
Wim Van Paepegem
C1
Conferentie
2022
A novel multi-classifier information fusion based on Dempster-Shafer theory : application to vibration-based fault detection
Vahid Yaghoubi Nasrabadi
Liangliang Cheng
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL
2022
A variational approach for accurate prediction of stress and displacement fields and thermo-elastic constants in general symmetric laminates containing ply cracking and delamination under general triaxial loading
Mohammad Hajikazemi
Hossein Ahmadi
L. N. McCartney
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
2022
Advanced modelling of semi-crystalline polymers and application for micromechanical modelling predictions
Pei Hao
Ruben Sevenois
Wim Van Paepegem
Francisco Antonio Gilabert Villegas
C3
Conferentie
2022
An energy method for physics-based progressive damage modelling in composite laminates under multiaxial fatigue loading
Mohammad Hajikazemi
Josef Sommer
Wim Van Paepegem
C3
Conferentie
2022
An ensemble classifier for vibration-based quality monitoring
Vahid Yaghoubi Nasrabadi
Liangliang Cheng
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
2022
Broadband nonlinear elastic wave modulation spectroscopy for damage detection in composites
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL
2022
Broadband nonlinear elastic wave modulation spectroscopy for inspection of stiffened aerospace CFRP panels
Joost Segers
Saeid Hedayatrasa
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2022
CNN-DST : ensemble deep learning based on Dempster–Shafer theory for vibration-based fault recognition
Vahid Yaghoubi Nasrabadi
Liangliang Cheng
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL
2022
Continuous fiber-reinforced aramid/PETG 3D-printed composites with high fiber loading through fused filament fabrication
Sander Rijckaert
Lode Daelemans
Ludwig Cardon
Matthieu Boone
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
POLYMERS
2022
Damage characterization in multidirectional glass fibre reinforced polypropylene laminates under quasi-static loading : experiment & simulation
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
C1
Conferentie
2022
Detailed experimental validation and benchmarking of six models for longitudinal tensile failure of unidirectional composites
C. Breite
A. Melnikov
A. Turon
A. B. de Morais
C. Le Bourlot
E. Maire
E. Schöberl
F. Otero
F. Mesquita
I. Sinclair
et al.
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2022
Effect of fibre orientation, temperature, moisture content and strain rate on the tensile behaviour of short glass fibre-reinforced polyamide 6
Daniele Finazzi
Ruben Sevenois
Lode Daelemans
Karen De Clerck
Wim Van Paepegem
C1
Conferentie
2022
Experimental and numerical damage characterization of glass/polypropylene multidirectional laminates under quasi-static loading condition
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2022
Experimental characterisation of short fibre reinforced thermoplastic materials for the use in heat exchangers : development of test setups and methodology for subcomponents, coupons and embedded single fibres
Joanna Schalnat
Wim Van Paepegem
Lode Daelemans
Proefschrift
2022
FLASH INFRARED THERMOGRAPHY Efficient Detection of Production Defects in A CFRP Aircraft Component by Means of Flash Infrared Thermography
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
U
Artikel in een tijdschrift
in
SAMPE JOURNAL
2022
Fast dynamic siloxane exchange mechanism for reshapable vitrimer composites
Tapas Debsharma
Virginia Amfilochiou
Aleksandra Alicja Wróblewska
Ives De Baere
Wim Van Paepegem
Filip Du Prez
A1
Artikel in een tijdschrift
in
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
2022
Finite element analysis of wind turbine blades subjected to torsional loads : shell vs solid elements
Rodrigo Paiva Tavares
Vincent Bouwman
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2022
Full-field measurement of strain and temperature in tensile testing of short fibre-reinforced thermoplastic composites
Daniele Finazzi
Ruben Sevenois
Wim Van Paepegem
C3
Conferentie
2022
Hydraulic-based testing and material modelling to investigate uniaxial compression of thermoset and thermoplastic polymers in quasistatic-to-dynamic regime
Pei Hao
S.W.F. Spronk
Wim Van Paepegem
Francisco Antonio Gilabert Villegas
A1
Artikel in een tijdschrift
in
MATERIALS & DESIGN
2022
In-Situ SEM analysis of the tensile properties of microscale epoxy specimens
Olivier Verschatse
Lode Daelemans
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2022
Influence of the stacking angle on the strength and stiffness properties of tiled laminates for civil applications : a DIC based approach
Jordi Uyttersprot
Wouter De Corte
Wim Van Paepegem
P1
Conferentie
2022
Manufacturing and mechanical characterisation of advanced re-formable fibre-reinforced vitrimer composites
Virginia Amfilochiou
Tapas Debsharma
Ives De Baere
Filip Du Prez
Wim Van Paepegem
C3
Conferentie
2022
Manufacturing and mechanical characterisation of advanced re-formable fibre-reinforced vitrimer composites
Virginia Amfilochiou
Tapas Debsharma
Ives De Baere
Filip Du Prez
Wim Van Paepegem
C1
Conferentie
2022
Mechanical study of the tensile prperties of epoxy at the microscale level
Olivier Verschatse
Lode Daelemans
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2022
Micro-scale measurements on epoxy using in-situ microscopic techniques
Olivier Verschatse
Lode Daelemans
Wim Van Paepegem
Karen De Clerck
C1
Conferentie
2022
Microstructural and Mechanical Characterization of Chromium Coating Deposed on Carbon Fibers
Seif Eddine Benhammouda
Abdelghani May
Yacine Benabid
Wim Van Paepegem
Aboubakr Medjahed
Mohamed Dia Eddine Boudiaf
U
Artikel in een tijdschrift
in
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
2022
Multi scale modelling of short fiber reinforced polymers
Hossein Ahmadi
Mohammad Hajikazemi
Yuriy Sinchuk
Wim Van Paepegem
C3
Conferentie
2022
Numerical study on the effect of matrix self-heating on the thermo-visco-plastic response of continuous fiber-reinforced polymers under transverse tensile loading
Ruben Sevenois
Pei Hao
Wim Van Paepegem
Francisco Antonio Gilabert Villegas
A1
Artikel in een tijdschrift
in
POLYMERS
2022
Observing deformation mechanisms at microscale
Olivier Verschatse
Lode Daelemans
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2022
Permanent deformation, stiffness degradation and strength of open hole Glass/PA6 UD thermoplastic composite in tension and compression
Ruben Sevenois
Wim Van Paepegem
C1
Conferentie
2022
Phase inversion in (vibro‐)thermal wave imaging of materials : extracting the AC component and filtering nonlinearity
Saeid Hedayatrasa
Gaétan Poelman
Joost Segers
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
STRUCTURAL CONTROL & HEALTH MONITORING
2022
Probabilistic ultrasound C-scan imaging of barely visible impact damage in CFRP laminates
Jeroen Vandendriessche
Adil Han Orta
Erik Verboven
Wim Van Paepegem
Koen Van Den Abeele
Mathias Kersemans
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2022
Redesigning nanocrystal synthesis : critically evaluating the use of solvents and ligands
Evert Dhaene
Isabel Van Driessche
Jonathan De Roo
Klaartje De Buysser
Wim Van Paepegem
Proefschrift
2022
Self-reference broadband local wavenumber estimation (SRB-LWE) for defect assessment in composites
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
2022
Structural optimization of patient-specific temporomandibular joint replacement implants for additive manufacturing : novel metrics for safety evaluation and biomechanical performance
Manuel da Silva Pinheiro
Anouar Krairi
Robin Willaert
Maria Cristiana Ferreira Da Costa
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
BIO-DESIGN AND MANUFACTURING
2022
Theory of variational stress transfer for fast and robust damage and fracture analysis of composite materials
Mohammad Hajikazemi
Wim Van Paepegem
C3
Conferentie
2022
Thermo-mechanical modelling of UD composites to investigate self-heating and thermal softening effect of polymer matrix
Pei Hao
Ruben Sevenois
Wim Van Paepegem
Francisco Antonio Gilabert Villegas
C1
Conferentie
2022
Variant selection during BCC to HCP phase transformation in selective laser melted Ti-6Al-4V
H. Xianga
Wim Van Paepegem
Leo Kestens
U
Artikel in een tijdschrift
in
MATERIALIA
2022
X-ray CT based multi-layer unit cell modeling of carbon fiber-reinforced textile composites: Segmentation, meshing and elastic property homogenization
Yuriy Sinchuk
Oxana Shishkina
Mikael Gueguen
Loic Signor
Carole Nadot-Martin
Herve Trumel
Wim Van Paepegem
U
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2022
2021
A synchrotron computed tomography dataset for validation of longitudinal tensile failure models based on fibre break and cluster development
C. Breite
A. Melnikov
A. Turon
A. B. de Morais
C. Le Bourlot
E. Maire
E. Schöberl
F. Otero
F. Mesquita
I. Sinclair
et al.
A2
Artikel in een tijdschrift
in
DATA IN BRIEF
2021
Adaptive spectral band integration in thermographic inspection of composites
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2021
Adaptive spectral band integration in thermographic inspection of composites
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2021
Biomechanical evaluation of the human mandible after temporomandibular joint replacement under different biting conditions
Manuel da Silva Pinheiro
Robin Willaert
Afaq Khan
Anouar Krairi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
SCIENTIFIC REPORTS
2021
Blind benchmarking of seven longitudinal tensile failure models for two virtual unidirectional composites
C. Breite
A. Melnikov
A. Turon
A. B. de Morais
F. Otero
F. Mesquita
J. Costa
J. A. Mayugo
J. M. Guerrero
L. Gorbatikh
et al.
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2021
Broadband local wavenumber estimation for damage detection and quantification in CFRP components
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2021
Data preparation for training CNNs : application to vibration-based condition monitoring
Vahid Yaghoubi Nasrabadi
Liangliang Cheng
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2021
Does size matter? In-situ SEM analysis of the tensile properties of epoxy at the microscale
Olivier Verschatse
Lode Daelemans
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2021
Does size matter? In-situ SEM analysis of the tensile properties of epoxy at the microscale
Olivier Verschatse
Lode Daelemans
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2021
Effect of fiber packing on POD-based reduced order model for the prediction of elastic properties of continuous fiber-reinforced composite materials
Arada Jamnongpipatkul
Ruben Sevenois
Wim Desmet
Wim Van Paepegem
Frank Naets
Francisco Antonio Gilabert Villegas
C3
Conferentie
2021
Experimental comparison of various excitation and acquisition techniques for modal analysis of violins
Tim Duerinck
Joost Segers
Ewa Skrodzka
Geerten Verberkmoes
Marc Leman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
APPLIED ACOUSTICS
2021
Geometrical and deep learning approaches for instance segmentation of CFRP fiber bundles in textile composites
Yuriy Sinchuk
Pierre Kibleur
Jan Aelterman
Matthieu Boone
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2021
Identification of the orthotropic elastic tensor of composites using full field lamb wave energy velocities and dispersion curves
Adil Orta
Shain Azadi
Saeid Hedayatrasa
Nicolaas Roozen
Wim Van Paepegem
Mathias Kersemans
Koen Van Den Abeele
P1
Conferentie
2021
Kinematic and mechanical response of dry woven fabrics in through-thickness compression : virtual fiber modeling with mesh overlay technique and experimental validation
Lode Daelemans
Brecht Tomme
Baris Caglar
Véronique Michaud
Jeroen Van Stappen
Veerle Cnudde
Matthieu Boone
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2021
Long-term stiffness prediction of particle filled polymers by dynamic mechanical analysis : frequency sweep versus creep method
Joanna Schalnat
Lode Daelemans
Ives De Baere
Karen De Clerck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2021
Mechanical modelling of reinforcement fabrics using a virtual fiber approach with hybrid elements
Lode Daelemans
Brecht Tomme
Tien Dung Dinh
Baris Caglar
Véronique Michaud
Jeroen Van Stappen
Veerle Cnudde
Matthieu Boone
Wim Van Paepegem
C3
Conferentie
2021
Modeling detrimental effects of high surface roughness on the fatigue behavior of additively manufactured Ti-6Al-4V alloys
Tien Dung Dinh
Shiwei Han
Vahid Yaghoubi Nasrabadi
Hao Xiang
H. Erdelyi
T. Craeghs
Joost Segers
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF FATIGUE
2021
Modeling lamb wave propagation in visco-elastic composite plates using a fifth-order plate theory
Adil Han Orta
Jeroen Vandendriessche
Mathias Kersemans
Wim Van Paepegem
Nicolaas Bernardus Roozen
Koen Van Den Abeele
A1
Artikel in een tijdschrift
in
ULTRASONICS
2021
Modeling of geometric configuration and fiber interactions in short fiber reinforced composites via new modified Eshelby tensors and enhanced mean-field homogenization
Ehsan Rashidinejad
Hossein Ahmadi
Mohammad Hajikazemi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MECHANICS OF MATERIALS
2021
Multi scale digital image correlation for automatic edge detection of ply cracks in composite laminates under quasi static and fatigue loading
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
C3
Conferentie
2021
Nonlinear local wave-direction estimation for in-sight and out-of-sight damage localization in composite plates
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
NDT & E INTERNATIONAL
2021
On the application of an optimized frequency-phase modulated waveform for enhanced infrared thermal wave radar imaging of composites
Saeid Hedayatrasa
Gaétan Poelman
Joost Segers
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
OPTICS AND LASERS IN ENGINEERING
2021
Optimal design parameters for a phased array based ultrasonic polar scan
Jannes Daemen
Arvid Martens
Mathias Kersemans
Erik Verboven
Steven Delrue
Wim Van Paepegem
Koen Van Den Abeele
A1
Artikel in een tijdschrift
in
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL
2021
Permanent deformation and stiffness degradation of open hole glass/PA6 UD thermoplastic composite in tension and compression
Ruben Sevenois
Xiaoyu Yang
Erik Verboven
Mathias Kersemans
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MATERIALS
2021
Predictive modelling of the mechanics of textiles using a (near) micro-scale virtual fibre method
Lode Daelemans
Tien Dung Dinh
Wim Van Paepegem
C3
Conferentie
2021
Quality inspection of complex-shaped metal parts by vibrations and an integrated Mahalanobis classification system
Liangliang Cheng
Vahid Yaghoubi Nasrabadi
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL
2021
Robust and baseline-free full-field defect detection in complex composite parts through weighted broadband energy mapping of mode-removed guided waves
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
2021
Specimen preparation and qualitative damage assessment in continuous glass fibre reinforced P olypropylene under in plane fatigue
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
C3
Conferentie
2021
Sputter deposited metal layers embedded in composites : from fundamentals to applications
Florian Cougnon
Mathias Kersemans
Wim Van Paepegem
Diederik Depla
A1
Artikel in een tijdschrift
in
COATINGS
2021
Toughening mechanisms responsible for excellent crack resistance in thermoplastic nanofiber reinforced epoxies through in-situ optical and scanning electron microscopy
Lode Daelemans
Olivier Verschatse
Lisa Heirman
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2021
Vibration-based condition monitoring by ensemble deep learning
Vahid Yaghoubi Nasrabadi
Liangliang Cheng
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2021
Vibrational quality classification of metallic turbine blades under measurement uncertainty
Liangliang Cheng
Vahid Yaghoubi Nasrabadi
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2021
Vibro-thermal wave radar : application of barker coded amplitude modulation for enhanced low-power vibrothermographic inspection of composites
Saeid Hedayatrasa
Joost Segers
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
MATERIALS
2021
Violin making with fiber-reinforced composites : an artistic and scientific research journey
Tim Duerinck
Wim Van Paepegem
Marc Leman
Geerten Verberkmoes
Proefschrift
2021
2020
A robust multi-scale gapped smoothing algorithm for baseline-free damage mapping from raw thermal images in flash thermography
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2020
A unified approach to model the effect of porosity and high surface roughness on the fatigue properties of additively manufactured Ti6-Al4-V alloys
Tien Dung Dinh
Joachim Vanwalleghem
Hao Xiang
H Erdelyi
T Craeghs
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
ADDITIVE MANUFACTURING
2020
Adaptive spectral band integration in flash thermography : enhanced defect detectability and quantification in composites
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2020
An experimental study on the defect detectability of time- and frequency-domain analyses for flash thermography
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
APPLIED SCIENCES-BASEL
2020
Automatic edge detection of ply cracks in glass fiber composite laminates under quasi-static and fatigue loading using multi-scale digital image correlation
Ivan Miskdjian
Mohammad Hajikazemi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2020
Backside delamination detection in composites through local defect resonance induced nonlinear source behavior
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
JOURNAL OF SOUND AND VIBRATION
2020
Characterization of orthotropic elastic tensor using lamb waves
Adil Han Orta
Joost Segers
Jeroen Vandendriessche
Nicolaas Bernardus Roozen
Wim Van Paepegem
Mathias Kersemans
Koen Van Den Abeele
C1
Conferentie
2020
Classifier fusion for vibrational NDT of complex metallic turbine blades
Vahid Yaghoubi Nasrabadi
Liangliang Cheng
Wim Van Paepegem
Mathias Kersemans
P1
Conferentie
2020
Closed-form formulae for prediction of homogenized ply-properties and laminate thermo-elastic constants in symmetric laminates containing ply cracks in multiple orientations
Hossein Ahmadi
Mohammad Hajikazemi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2020
Construction of representative unit cells for FE analysis of textile composite plies
Ruben Sevenois
Hoofdstuk in een boek
in
Multi-scale continuum mechanics modelling of fibre-reinforced polymer composites
2020
DIC measurement of the full strain field in a tiled laminate to determine local and global stiffness properties
Jordi Uyttersprot
Wouter De Corte
Wim Van Paepegem
C1
Conferentie
2020
Delamination resistant composites by interleaving bio-based long-chain polyamide nanofibers through optimal control of fiber diameter and fiber morphology
Timo Meireman
Lode Daelemans
Sander Rijckaert
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2020
Direct Mori-Tanaka calculations of strains in ellipsoidal inclusions with multiple orientations : comments on the papers : Naili, G. et al. Comp Sci Tech, 187: 107942, 2020 (https://doi.org/10.1016/j.compscitech.2019.107942) and Jain, A. et al., Comp Sci Tech, 87: 86–93, 2013 (https://doi.org/10.1016/j.compscitech.2013.08.009)
Atul Jain
Yasmine Abdin
Wim Van Paepegem
Stepan V. Lomov
Redactioneel materiaal
2020
Dynamic curing agents for amine-hardened epoxy vitrimers with short (re)processing times
Yann Spiesschaert
Marc Guerre
Ives De Baere
Wim Van Paepegem
Johan Winne
Filip Du Prez
A1
Artikel in een tijdschrift
in
MACROMOLECULES
2020
Effect of interleaved polymer nanofibers on the properties of glass and carbon fiber composites
Lode Daelemans
Wim Van Paepegem
Karen De Clerck
Hoofdstuk in een boek
in
Fiber-reinforced nanocomposites : fundamentals and applications
2020
Effect of multiaxiality, stacking sequence and number of off-axis layers on the mechanical response and damage sequence of carbon/epoxy composite laminates under static loading
Kalliopi-Artemi Kalteremidou
Mohammad Hajikazemi
Wim Van Paepegem
Danny Van Hemelrijck
Lincy Pyl
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2020
Effect of rotor–tower interaction, tilt angle, and yaw misalignment on the aeroelasticity of a large horizontal axis wind turbine with composite blades
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
A1
Artikel in een tijdschrift
in
WIND ENERGY
2020
Efficient detection of production defects in a CFRP aircraft component by means of flash infrared thermography
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2020
Fluid–structure interaction simulations of a wind gust impacting on the blades of a large horizontal axis wind turbine
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
A1
Artikel in een tijdschrift
in
ENERGIES
2020
In-situ observations of microscale ductility in a quasi-brittle bulk scale epoxy
Olivier Verschatse
Lode Daelemans
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
POLYMERS
2020
Influencing parameters on measurement accuracy in dynamic mechanical analysis of thermoplastic polymers and their composites
Joanna Schalnat
David Garoz Gómez
Lode Daelemans
Ives De Baere
Karen De Clerck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2020
Investigation on fiber packing geometries towards efficient and realistic prediction of elastic properties of continuous fiber-reinforced composite materials
Arada Jamnongpipatkul
Ruben Sevenois
Wim Desmet
Wim Van Paepegem
Frank Naets
Francisco Antonio Gilabert Villegas
C3
Conferentie
2020
Laser welding of carbon fibre filled polytetra fluoroethylene
Matthias Herthoge
Jens De Pelsmaeker
Matthieu Boone
Ives De Baere
Wim Van Paepegem
Sandra Van Vlierberghe
A1
Artikel in een tijdschrift
in
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
2020
Listener evaluations of violins made from composites
Tim Duerinck
Geerten Verberkmoes
Claudia Fritz
Marc Leman
Luc Nijs
Mathias Kersemans
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA
2020
Mahalanobis classification system (MCS) integrated with binary particle swarm optimization for robust quality classification of complex metallic turbine blades
Liangliang Cheng
Vahid Yaghoubi Nasrabadi
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
2020
Mahalonobis classification system for quality classification of complex metallic turbine blades
Liangliang Cheng
Vahid Yaghoubi Nasrabadi
Wim Van Paepegem
Mathias Kersemans
P1
Conferentie
2020
Matrix cracking initiation, propagation and laminate failure in multiple plies of general symmetric composite laminates
Mohammad Hajikazemi
L.N. McCartney
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2020
Modelling nonlinear material response of polymer matrices used in fiber-reinforced composites
Francisco Antonio Gilabert Villegas
Hoofdstuk in een boek
in
Multi-scale continuum mechanics modelling of fibre-reinforced polymer composites
2020
Multi-scale continuum mechanics modelling of fibre-reinforced polymer composites
Boekeditor
2020
Multi-scale gapped smoothing algorithm for robust baseline-free damage detection in optical infrared thermography
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
NDT & E INTERNATIONAL
2020
Nanofibre toughening of dissimilar interfaces in composites
Timo Meireman
Lode Daelemans
Elisa Van Verre
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
MATERIALS & DESIGN
2020
Nonlinear elastic wave energy imaging for the detection and localization of in-sight and out-of-sight defects in composites
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
APPLIED SCIENCES-BASEL
2020
Nonlinear elastic wave propagation and breathing-debond identification in a smart composite structure
Shirsendu Sikdar
Wim Van Paepegem
Wiesław Ostachowicz
Mathias Kersemans
A1
Artikel in een tijdschrift
in
COMPOSITES PART B - ENGINEERING
2020
On the influence of reference Mahalanobis distance space for quality classification of complex metal parts using vibrations
Liangliang Cheng
Vahid Yaghoubi Nasrabadi
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
APPLIED SCIENCES-BASEL
2020
On the prediction of the bi-axial failure envelope of a UD CFRP composite lamina using computational micromechanics : effect of microscale parameters on macroscale stress–strain behavior
A. Sharma
S. Daggumati
A. Gupta
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2020
Permanent deformation, stiffness degradation and strength of open hole glass/PA6 UD thermoplastic composite in tension and compression
Ruben Sevenois
Wim Van Paepegem
C1
Conferentie
2020
Physics-based methodology for predicting ply cracking and laminate failure in symmetric composite laminates under multiaxial loading
Mohammad Hajikazemi
Hoofdstuk in een boek
in
Multi-scale continuum mechanics modelling of fibre-reinforced polymer composites
2020
Prediction of fatigue crack initiation in UD laminates under different stress ratios
Ruben Sevenois
Wim Van Paepegem
Hoofdstuk in een boek
in
Fatigue life prediction of composites and composite structures
2020
Probing the limits of full-field linear local defect resonance identification for deep defect detection
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
ULTRASONICS
2020
Relating structural phase transitions to mechanoluminescence : the case of the Ca1-xSrxAl2Si2O8:1%Eu2+,1%Pr3+ anorthite
Ang Feng
Simon Michels
Alfredo Lamberti
Philippe Smet
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
ACTA MATERIALIA
2020
Robust and baseline-free defect detection in aircraft CFRP components using full-field guided wave analysis
Joost Segers
Saeid Hedayatrasa
Erik Verboven
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2020
Sputter deposition on composites : interplay between film and substrate properties
Florian Cougnon
Diederik Depla
Wim Van Paepegem
Proefschrift
2020
Variational analysis of cracking in general composite laminates subject to triaxial and bending loads
Mohammad Hajikazemi
L.N. McCartney
Hossein Ahmadi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2020
Variational and deep learning segmentation of very-low-contrast X-ray computed tomography images of carbon/epoxy woven composites
Yuriy Sinchuk
Pierre Kibleur
Jan Aelterman
Matthieu Boone
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MATERIALS
2020
Vibrothermographic spectroscopy with thermal latency compensation for effective identification of local defect resonance frequencies of a CFRP with BVID
Saeid Hedayatrasa
Joost Segers
Gaétan Poelman
Erik Verboven
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
NDT & E INTERNATIONAL
2020
Virtual fiber modelling : a viable multi-scale approach for mechanical modelling of textile materials
Lode Daelemans
Tien Dung Dinh
Wim Van Paepegem
C1
Conferentie
2020
2019
3D simulations of a phased array ultrasonic polar scan
Jannes Daemen
Arvid Martens
Mathias Kersemans
Steven Delrue
Erik Verboven
Wim Van Paepegem
Koen Van Den Abeele
C3
Conferentie
2019
A validated computational framework to evaluate the stiffness of 3D printed ankle foot orthoses
Alessio Ielapi
Nicolas Lammens
Wim Van Paepegem
Malcolm Forward
Jan Patrick Deckers
Miguel Vermandel
Matthieu De Beule
A1
Artikel in een tijdschrift
in
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING
2019
Analysis of the aerodynamic loads on a wind turbine in off-design conditions
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
Hoofdstuk in een boek
in
Recent advances in CFD for wind and tidal offshore turbines
2019
Application of flash thermography and advanced post-processing techniques for rapid NDT of CFRP aircraft component : a case study
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2019
Characterization of the full viscoelastic tensor of anisotropic multilayered material plates by means of the Ultrasonic Polar Scan
Arvid Martens
Jannes Daemen
Mathias Kersemans
Steven Delrue
Erik Verboven
Wim Van Paepegem
Koen Van Den Abeele
C3
Conferentie
2019
Characterization of the orthotropic viscoelastic tensor of composites using the ultrasonic polar scan
Arvid Martens
Mathias Kersemans
Jannes Daemen
Erik Verboven
Wim Van Paepegem
Steven Delrue
Koen Van Den Abeele
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2019
Composite Materials: Excellent nanofiber adhesion for hybrid polymer materials with high toughness based on matrix interdiffusion during chemical conversion (Adv. Funct. Mater. 8/2019)
Lode Daelemans
Wim Van Paepegem
Dagmar D'hooge
Karen De Clerck
Andere
2019
Consistent application of periodic boundary conditions in implicit and explicit finite element simulations of damage in composites
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Ruben Sevenois
Siebe Spronk
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2019
Dynamic load and stress analysis of a large horizontal axis wind turbine using full scale fluid-structure interaction simulation
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
A1
Artikel in een tijdschrift
in
RENEWABLE ENERGY
2019
Efficient automated extraction of local defect resonance parameters for non-destructive testing of fiber reinforced polymers
Joost Segers
Saeid Hedayatrasa
Erik Verboven
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2019
Efficient automated extraction of local defect resonance parameters in fiber reinforced polymers using data compression and iterative amplitude thresholding
Joost Segers
Saeid Hedayatrasa
Erik Verboven
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
JOURNAL OF SOUND AND VIBRATION
2019
Enhanced detectability of barely visible impact damage in CFRPs : vibrothermography of in-plane local defect resonances
Saeid Hedayatrasa
Joost Segers
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2019
Enhanced low power vibrothermography of impacted CFRP through in-plane local defect resonances
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2019
Evaluating nonlinear ultrasonic scanning techniques for advanced NDT of composites
Erik Verboven
Mathias Kersemans
Arvid Martens
Jannes Daemen
Steven Delrue
Koen Van Den Abeele
Wim Van Paepegem
C3
Conferentie
2019
Evidencing broadband filtration and steering of guided waves through porous phononic plates with optimized design
Saeid Hedayatrasa
Mathias Kersemans
Kazem Abhary
Wim Van Paepegem
C3
Conferentie
2019
Excellent nanofiber adhesion for hybrid polymer materials with high toughness based on matrix interdiffusion during chemical conversion
Lode Daelemans
Wim Van Paepegem
Dagmar D'hooge
Karen De Clerck
A1
Artikel in een tijdschrift
in
ADVANCED FUNCTIONAL MATERIALS
2019
Fatigue testing for polymer matrix composites
Ruben Sevenois
Wim Van Paepegem
Hoofdstuk in een boek
in
Creep and fatigue in polymer matrix composites
2019
Flash thermographic inspection of composites : shining light on a hot topic
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2019
Flash thermography of composites : evaluation of advanced post-processing approaches
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2019
Fluid-structure interaction simulations of wind turbines with composite blades
Gilberto Santo
Joris Degroote
Wim Van Paepegem
Proefschrift
2019
Frequency-phase modulated thermal wave radar : stepping beyond state-of-the-art infrared thermography
Saeid Hedayatrasa
Gaétan Poelman
Joost Segers
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2019
Full wave field signal processing techniques for NDT of CFRP aircraft panel : a case study
Joost Segers
Saeid Hedayatrasa
Erik Verboven
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2019
Full wave field signal processing techniques for NDT of composites
Joost Segers
Saeid Hedayatrasa
Erik Verboven
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2019
Full wave field signal processing techniques for NDT of composites : a case study
Joost Segers
Saeid Hedayatrasa
Erik Verboven
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2019
Imaging of BVID in composites : comparison of advanced NDT methodologies
Mathias Kersemans
Saeid Hedayatrasa
Joost Segers
Erik Verboven
Gaétan Poelman
Wim Van Paepegem
C3
Conferentie
2019
Implementation of bending-active elements in kinematic form-active structures - Part I : design of a representative case study
Silke Puystiens
Maarten Van Craenenbroeck
Danny Van Hemelrijck
Wim Van Paepegem
Marijke Mollaert
Lars De Laet
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2019
Implementation of bending-active elements in kinematic form-active structures - Part II : experimental verification
Silke Puystiens
Maarten Van Craenenbroeck
Danny Van Hemelrijck
Wim Van Paepegem
Marijke Mollaert
Lars De Laet
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2019
Implications of finite sized transducers on the determination of the viscoelastic tensor of composite plates with the ultrasonic polar scan
Arvid Martens
Jannes Daemen
Steven Delrue
Mathias Kersemans
Erik Verboven
Wim Van Paepegem
Koen Van Den Abeele
C3
Conferentie
2019
In-plane local defect resonances for efficient vibrothermography of impacted carbon fiber reinforced plastics (CFRP)
Joost Segers
Saeid Hedayatrasa
Erik Verboven
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
NDT & E INTERNATIONAL
2019
Influence of tab debonding on measured stiffness evolution in Compression-Compression and Tension-Compression fatigue testing of short gauge length coupons
Ruben Sevenois
David Garoz Gómez
Francisco Antonio Gilabert Villegas
C. Hochard
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2019
Inspection of impacted composites : evaluation of state-of-the-art NDT approaches
Mathias Kersemans
Saeid Hedayatrasa
Gaétan Poelman
Joost Segers
Erik Verboven
Wim Van Paepegem
C3
Conferentie
2019
Interdiffusing core-shell nanofiber interleaved composites for excellent Mode I and Mode II delamination resistance
Lode Daelemans
Nuray Kizildag
Wim Van Paepegem
Dagmar D'hooge
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2019
Local bending stiffness identification of beams using simultaneous Fourier-series fitting and shearography
Filip Zastavnik
Rik Pintelon
Mathias Kersemans
Wim Van Paepegem
Lincy Pyl
A1
Artikel in een tijdschrift
in
JOURNAL OF SOUND AND VIBRATION
2019
Local defect resonance for NDT of composites
Joost Segers
Mathias Kersemans
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
C3
Conferentie
2019
Mesoscale analysis of ply-cracked composite laminates under in-plane and flexural thermo-mechanical loading
Tien Dung Dinh
David Garoz Gómez
Mohammad Hajikazemi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2019
Mesoscale finite element analysis of cracked composite laminates under out-of-plane loads using 3D periodic boundary conditions
David Garoz Gómez
Mohammad Hajikazemi
Tien Dung Dinh
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2019
Modal analysis techniques for music instruments
Tim Duerinck
Mathias Kersemans
Ewa Skrodzka
Marc Leman
Geerten Verberkmoes
Wim Van Paepegem
C3
Conferentie
2019
Model order reduction for multi-scale strength simulation of composite materials : preliminary framework
Arada Jamnongpipatkul
Ruben Sevenois
Wim Desmet
Wim Van Paepegem
Frank Naets
Francisco Antonio Gilabert Villegas
C3
Conferentie
2019
Model to accurately predict out-of-plane shear stiffness reduction in general cracked laminates
Mohammad Hajikazemi
David Garoz Gómez
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2019
Multiscale fatigue modeling of additively manufactured Ti6Al4V alloys
Tien Dung Dinh
Joachim Vanwalleghem
Hunor Erdelyi
Sven Cornelissen
Tom Craeghs
Wim Van Paepegem
C3
Conferentie
2019
Multiscale fatigue modelling of additively manufactured metallic components
Tien Dung Dinh
Joachim Vanwalleghem
Hunor Erdelyi
Sven Cornelissen
Tom Craeghs
Wim Van Paepegem
C1
Conferentie
2019
Music instruments from carbon, glass or flax fibres
Tim Duerinck
Geerten Verberkmoes
Wim Van Paepegem
Mathias Kersemans
Luc Nijs
Marc Leman
Artikel in een magazine
2019
Nanofibers for damage resistant composite materials
Lode Daelemans
Timo Meireman
Wim Van Paepegem
Dagmar D'hooge
Karen De Clerck
C1
Conferentie
2019
Near-microscale modelling of dry woven fabrics under in-plane shear loading
Tien Dung Dinh
Lode Daelemans
Wim Van Paepegem
C1
Conferentie
2019
Novel discrete frequency-phase modulated excitation waveform for enhanced depth resolvability of thermal wave radar
Saeid Hedayatrasa
Gaétan Poelman
Joost Segers
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
2019
Numerical investigation of the effect of tower dam and rotor misalignment on performance and loads of a large wind turbine in the atmospheric boundary layer
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
A1
Artikel in een tijdschrift
in
ENERGIES
2019
Numerical study of a phased array-based ultrasonic polar scan to determine plane-wave reflection coefficients of plates
Jannes Daemen
Arvid Martens
Mathias Kersemans
Erik Verboven
Steven Delrue
Wim Van Paepegem
Koen Van Den Abeele
A1
Artikel in een tijdschrift
in
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL
2019
Performance of frequency and/or phase modulated excitation waveforms for optical infrared thermography of CFRPs through thermal wave radar : a simulation study
Saeid Hedayatrasa
Gaétan Poelman
Joost Segers
Wim Van Paepegem
Mathias Kersemans
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2019
Sweep vibrothermography and thermal response derivative spectroscopy for identification of local defect resonance frequencies of impacted CFRP
Saeid Hedayatrasa
Joost Segers
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2019
The state-of-the-art and beyond in non-destructive testing of a complex CFRP component
Gaétan Poelman
Joost Segers
Saeid Hedayatrasa
Erik Verboven
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2019
The structural behavior of tiled laminate GFRP composites, a class of robust materials for civil applications
Wouter De Corte
Jordi Uyttersprot
Wim Van Paepegem
C1
Conferentie
2019
Thermo-mechanical coupling of a viscoelastic-viscoplastic model for thermoplastic polymers : thermodynamical derivation and experimental assessment
Anouar Krairi
I. Doghri
Joanna Schalnat
G. Robert
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF PLASTICITY
2019
Thermographic NDT of composite aerospace components
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2019
Understanding the small scale to predict the large scale
Olivier Verschatse
Lode Daelemans
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2019
Variational model for ply cracking in multiple orientations in general symmetric composite laminates with full homogenization of damaged inplane and out-of-plane ply properties
Mohammad Hajikazemi
Ivan Miskdjian
David Garoz Gómez
Wim Van Paepegem
C1
Conferentie
2019
Vibrometric NDT of composite aerospace components
Joost Segers
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2019
Virtual design of modular 3D printed ankle foot orthoses
Alessio Ielapi
Wim Van Paepegem
Matthieu De Beule
Proefschrift
2019
2018
A progressive damage fatigue model for unidirectional laminated composites based on finite element analysis : theory and practice
Michael Hack
D. Carrella-Payan
B. Magneville
T. Naito
Y. Urushiyama
W. Yamazaki
T. Yokozeki
Wim Van Paepegem
A2
Artikel in een tijdschrift
in
FRATTURA ED INTEGRITA STRUTTURALE
2018
A variational model for free-edge interlaminar stress analysis in general symmetric and thin-ply composite laminates
Mohammad Hajikazemi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2018
Analysis of the aerodynamic loads on a wind turbine in off-design conditions
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
C1
Conferentie
2018
Assessement of urea based vitrimers as a new matrix material for fibre reinforced polymers
Ives De Baere
Wim Denissen
Wim Van Paepegem
Johan Winne
Filip Du Prez
C1
Conferentie
2018
Automated extraction of local defect resonance for efficient non-destructive testing of composites
Joost Segers
Erik Verboven
Saeid Hedayatrasa
Gaétan Poelman
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2018
Bragg-grating-based photonic strain and temperature sensor foils realized using imprinting and operating at very near infrared wavelengths
Jeroen Missinne
Nuria Teigell Beneitez
Marie-Aline Mattelin
Alfredo Lamberti
Geert Luyckx
Wim Van Paepegem
Geert Van Steenberge
A1
Artikel in een tijdschrift
in
SENSORS
2018
Characterization of CFRP mode I and mode II cohesive element parameters for 0//0 and +45//-45 interfaces
D Carrella-Payan
B Magneville
T Naito
T Yokozeki
Lode Daelemans
Wim Van Paepegem
M Hack
C3
Conferentie
2018
Characterization of the modal parameters of composite laminates using innovative ultrathin polymer waveguide sensor foils
Alfredo Lamberti
Wim Van Paepegem
Jeroen Missinne
C1
Conferentie
2018
Comparing damage from low-velocity impact and quasi-static indentation in automotive carbon/epoxy and glass/polyamide-6 laminates
Siebe Spronk
Mathias Kersemans
Jérémie De Baerdemaeker
Francisco Antonio Gilabert Villegas
Ruben Sevenois
David Garoz Gómez
C. Kassapoglou
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2018
Comparison of shell and solid finite element models for the static certification tests of a 43 m wind turbine blade
Mathijs Peeters
Gilberto Santo
Joris Degroote
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
ENERGIES
2018
Determination of the orthotropic viscoelastic tensor of composites by means of the pulsed ultrasonic polar scan
Arvid Martens
Jannes Daemen
Mathias Kersemans
Erik Verboven
Steven Delrue
Wim Van Paepegem
Koen Van Den Abeele
C1
Conferentie
2018
Development of a new generation of embedded sensors for monitoring structural composites
Alfredo Lamberti
Ang Feng
Florian Cougnon
Jeroen Missinne
Diederik Depla
Wim Van Paepegem
C1
Conferentie
2018
Development of a test rig and a testing procedure for bicycle frame stiffness measurements
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
A2
Artikel in een tijdschrift
in
SPORTS ENGINEERING
2018
Dynamic tensile testing of brittle composites using a hydraulic pulse machine : stress-strain synchronization and strain rate limits
Siebe Spronk
Erik Verboven
Francisco Antonio Gilabert Villegas
Ruben Sevenois
David Garoz Gómez
Mathias Kersemans
Wim Van Paepegem
C1
Conferentie
2018
Effect of intra-ply voids on the homogenized behavior of a ply in multidirectional laminates
A. Matveeva
David Garoz Gómez
Ruben Sevenois
M. Zhu
L. Pyl
Wim Van Paepegem
L. Farkas
P1
Conferentie
2018
Efficient methods for automated conversion of wind turbine blade designs into high-fidelity finite element models with shell and solid elements
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
Proefschrift
2018
Elastic properties and failure behavior of tiled laminate composites
Wouter De Corte
Arne Jansseune
Wim Van Paepegem
Jan Peeters
C1
Conferentie
2018
Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates
Lode Daelemans
Amaël Cohades
Timo Meireman
Jasper Beckx
Siebe Spronk
Mathias Kersemans
Ives De Baere
Hubert Rahier
Véronique Michaud
Wim Van Paepegem
et al.
A1
Artikel in een tijdschrift
in
MATERIALS & DESIGN
2018
Energy-based prediction of progressive ply cracking in multiple plies of general and thin-ply laminates under in-plane and bending loads using a homogenization method
Mohammad Hajikazemi
Wim Van Paepegem
C1
Conferentie
2018
Experimental characterisation of thermoplastics for use in heat exchangers
Joanna Schalnat
Anouar Krairi
Tom Wieme
Wim Van Paepegem
C1
Conferentie
2018
Experimental characterization and finite element modelling of strain-rate dependent hyperelastic properties of PVB interlayers
Joren Pelfrene
Sam Van Dam
Siebe Spronk
Wim Van Paepegem
C1
Conferentie
2018
Experimental characterization of thermoplastics for use in heat exchangers
Joanna Schalnat
Anouar Krairi
Tom Wieme
Wim Van Paepegem
C3
Conferentie
2018
Extraction of dispersion curves from a phased array based ultrasonic polar scan : simulation study
Jannes Daemen
Arvid Martens
Mathias Kersemans
Erik Verboven
Steven Delrue
Wim Van Paepegem
Koen Van Den Abeele
C3
Conferentie
2018
Flexural impact response of textile reinforced inorganic phosphate cement composites (TRC)
Jan Wastiels
Johan Van Ackeren
Tine Tysmans
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
CONSTRUCTION AND BUILDING MATERIALS
2018
High-fidelity finite element models of composite wind turbine blades with shell and solid elements
Mathijs Peeters
Gilberto Santo
Joris Degroote
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2018
Impact of additive manufacturing process conditions on the dynamic performance of metallic components
Hunor Erdelyi
Nicolas Lammens
Wim Van Paepegem
Brecht Van Hooreweder
C3
Conferentie
2018
Influence of finite size transducers on ultrasonic polar scan recordings and its impact on the determination of the viscoelastic tensor of anisotropic media
Arvid Martens
Jannes Daemen
Mathias Kersemans
Erik Verboven
Steven Delrue
Wim Van Paepegem
Koen Van Den Abeele
C3
Conferentie
2018
Influence of tab debonding on measured stiffness evolution in compression-compression fatigue testing of short gauge length coupons
Ruben Sevenois
David Garoz Gómez
Siebe Spronk
Francisco Antonio Gilabert Villegas
Christian Hochard
Wim Van Paepegem
C1
Conferentie
2018
Integrated process-induced sensitivities for fatigue simulation of additive manufacturing
Nicolas Lammens
Joachim Vanwalleghem
Sven Cornelissen
Michael Hack
Stefan Straesser
Hunor Erdelyi
Tom Craeghs
Wim Van Paepegem
C3
Conferentie
2018
Integration of manufacturing process-induced sensitivities into the fatigue simulation for additive manufactured materials
Nicolas Lammens
Joachim Vanwalleghem
Sven Cornelissen
Hunor Erdelyi
Tom Craeghs
Wim Van Paepegem
C3
Conferentie
2018
Introducing obliquely perforated phononic plates for enhanced bandgap efficiency
Saeid Hedayatrasa
Mathias Kersemans
Kazem Abhary
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MATERIALS
2018
Investigation of the rate-dependency of carbon/epoxy and glass/polyamide-6 composites in tension, mode-I delamination and low-velocity impact
Siebe Spronk
Wim Van Paepegem
Francisco Antonio Gilabert Villegas
Proefschrift
2018
Investigation to local defect resonance for non-destructive testing of composites
Joost Segers
Mathias Kersemans
Erik Verboven
Saeid Hedayatrasa
Javier Andres Calderon Tellez
Wim Van Paepegem
C1
Conferentie
2018
Matching spectroscopy with the ultrasonic polar scan for advanced NDT of composites
Erik Verboven
Mathias Kersemans
Arvid Martens
Jannes Daemen
Steven Delrue
Koen Van Den Abeele
Wim Van Paepegem
C1
Conferentie
2018
Models for intraply damage and strength prediction of unidirectional and woven composites under static and fatigue loading in tension and compression
Ruben Sevenois
Wim Van Paepegem
Francisco Antonio Gilabert Villegas
Proefschrift
2018
Multiscale approach for identification of transverse isotropic carbon fibre properties and prediction of woven elastic properties using ultrasonic identification
Ruben Sevenois
David Garoz Gómez
Erik Verboven
Siebe Spronk
Francisco Antonio Gilabert Villegas
Mathias Kersemans
L. Pyl
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2018
Multiscale approach to predict the orthotropic elasticity tensor of carbon fibres and woven carbon composites by ultrasonic insonification
Ruben Sevenois
Siebe Spronk
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Erik Verboven
Mathias Kersemans
Wim Van Paepegem
C1
Conferentie
2018
Non-destructive testing of composites by ultrasound, local defect resonance and thermography
Mathias Kersemans
Erik Verboven
Joost Segers
Saeid Hedayatrasa
Wim Van Paepegem
C1
Conferentie
2018
On efficient FE simulation of pulse infrared thermography for inspection of CFRPs
Saeid Hedayatrasa
Joost Segers
Javier Andres Calderon Tellez
Wim Van Paepegem
Mathias Kersemans
P1
Conferentie
2018
Optical infrared thermography of CFRP with artificial defects : performance of various post-processing techniques
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Javier Andres Calderon Tellez
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2018
Optimization and experimental validation of stiff porous phononic plates for widest complete bandgap of mixed fundamental guided wave modes
Saeid Hedayatrasa
Mathias Kersemans
Kazem Abhary
Mohammad Uddin
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
2018
Simulation of a circular phased array for a portable ultrasonic polar scan
Jannes Daemen
Mathias Kersemans
Arvid Martens
Erik Verboven
Steven Delrue
Wim Van Paepegem
Joris Degrieck
Koen Van den Abeele
P1
Conferentie
2018
Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres
Amaël Cohades
Lode Daelemans
Charlie Ward
Timo Meireman
Wim Van Paepegem
Karen De Clerck
Véronique Michaud
A1
Artikel in een tijdschrift
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2018
Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres
Amaël Cohades
Lode Daelemans
Charlie Ward
Timo Meireman
Wim Van Paepegem
Karen De Clerck
Véronique Michaud
C1
Conferentie
2018
Statistical simulation of ply cracking in general and thin-ply laminates under in-plane and bending loads : a variational approach
Mohammad Hajikazemi
Wim Van Paepegem
C3
Conferentie
2018
Stress-strain synchronization for high strain rate tests on brittle composites
Siebe Spronk
Erik Verboven
Francisco Antonio Gilabert Villegas
Ruben Sevenois
David Garoz Gómez
Mathias Kersemans
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2018
Tensile rate-dependency of carbon/epoxy and Glass/polyamide-6 composites
Siebe Spronk
Francisco Antonio Gilabert Villegas
Ruben Sevenois
David Garoz Gómez
Wim Van Paepegem
C1
Conferentie
2018
Theory of variational stress transfer in general symmetric composite laminates containing non-uniformly spaced ply cracks
Mohammad Hajikazemi
L. N. McCartney
Wim Van Paepegem
M. H. Sadr
A1
Artikel in een tijdschrift
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2018
Thermo-mechanical analysis of short fibre reinforced polymers for application in composite heat exchangers
Anouar Krairi
X Wang
Joanna Schalnat
Wim Van Paepegem
C3
Conferentie
2018
Thermo-mechanical constitutive behaviour models for unfilled and short fibre reinforced polymers for application in heat exchangers
Anouar Krairi
Joanna Schalnat
Wim Van Paepegem
C3
Conferentie
2018
Thermographic inspection of composites
Gaétan Poelman
Saeid Hedayatrasa
Joost Segers
Javier Andres Calderon Tellez
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2018
Thin and flexible polymer photonic sensor foils for monitoring composite structures
Jeroen Missinne
Nuria Teigell Beneitez
Alfredo Lamberti
Gabriele Chiesura
Geert Luyckx
Marie-Aline Mattelin
Wim Van Paepegem
Geert Van Steenberge
A1
Artikel in een tijdschrift
in
ADVANCED ENGINEERING MATERIALS
2018
Toward an efficient inverse characterization of the viscoelastic properties of anisotropic media based on the ultrasonic polar scan
A. Martens
Mathias Kersemans
J. Daemen
Erik Verboven
Wim Van Paepegem
Joris Degrieck
S. Delrue
K. Van den Abeele
P1
Conferentie
2018
Towards a phased array based ultrasonic polar scan : simulation study and comparison with plane wave results
Jannes Daemen
Arvid Martens
Mathias Kersemans
Erik Verboven
Steven Delrue
Wim Van Paepegem
Koen Van Den Abeele
C1
Conferentie
2018
Towards in-plane local defect resonance for non-destructive testing of polymers and composites
Joost Segers
Mathias Kersemans
Saeid Hedayatrasa
Javier Andres Calderon Tellez
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
NDT & E INTERNATIONAL
2018
Variational analysis of free-edge stress and displacement fields in general un-symmetric and thin-ply laminates under in-plane, bending and thermal loading
Mohammad Hajikazemi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2018
Vinylogous urea vitrimers and their application in fiber reinforced composites
Wim Denissen
Ives De Baere
Wim Van Paepegem
Ludwik Leibler
Johan Winne
Filip Du Prez
A1
Artikel in een tijdschrift
in
MACROMOLECULES
2018
2017
A computational compensation method for fabric panels of tensioned membrane structures using a shape optimization method based on gradientless algorithms
Tien Dung Dinh
Ali Rezaei
T Linthout
M Mollaert
D Van Hemelrijck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
2017
A hybrid micro-meso-scale unit cell model for homogenization of the nonlinear orthotropic material behavior of coated fabrics used in tensioned membrane structures
Tien Dung Dinh
Ali Rezaei
Lode Daelemans
Marijke Mollaert
Danny Van Hemelrijck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2017
A physically based energy method for prediction of matrix crack induced laminate failure in general symmetric laminates
Mohammad Hajikazemi
Wim Van Paepegem
C1
Conferentie
2017
A progressive damage fatigue model for unidirectional laminated composites based on Finite Element Analysis: Theory and Practice
M Hack
D Carrella-Payan
B Magneville
T Naito
U Urushiyama
T Yokozeki
W Yamazaki
Wim Van Paepegem
C1
Conferentie
2017
Assessment of different meso-modelling techniques for 2D woven composites
Anna Matveeva
Seyyed Ahmad Tabatabaei
Ruben Sevenois
Laszlo Farkas
Wim Van Paepegem
Stepan Lomov
C3
Conferentie
2017
Characterization of real and substitute birds through experimental and numerical analysis of momentum, average impact force and residual energy in bird strike on three rigid targets : a flat plate, a wedge and a splitter
Frederik Allaeys
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
2017
Comparison between a Chimera technique and sliding interfaces for fluid-structure interaction simulations of wind turbines
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
C3
Conferentie
2017
Detection, localization and quantification of impact events on a stiffened composite panel with embedded fiber bragg grating sensor networks
Alfredo Lamberti
Geert Luyckx
Wim Van Paepegem
Ali Rezayat
Steve Vanlanduit
A1
Artikel in een tijdschrift
in
SENSORS
2017
Determination of strength and debonding energy of a glass-concrete interface for encapsulation-based self-healing concrete
Francisco Antonio Gilabert Villegas
Kim Van Tittelboom
Eleni Tsangouri
Danny Van Hemelrijck
Nele De Belie
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
CEMENT & CONCRETE COMPOSITES
2017
Development and validation of a set-up to measure the transferred multi-axial impact momentum of a bird strike on a booster vane
Frederik Allaeys
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
2017
Electrospun nanofibers for highly toughened fibre reinforced polymer composite laminates
Lode Daelemans
Timo Meireman
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C1
Conferentie
2017
Experimental analysis of the post-fracture response of laminated glass under impact and blast loading
Sam Van Dam
Wim Van Paepegem
David Lecompte
Proefschrift
2017
Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2017
Integral procedure to assess crack filling and mechanical contribution of polymer-based healing agent in encapsulation-based self-healing concrete
Francisco Antonio Gilabert Villegas
Kim Van Tittelboom
Jeroen Van Stappen
Veerle Cnudde
Nele De Belie
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
CEMENT & CONCRETE COMPOSITES
2017
Interaction of composites with various types of embedded sensors and their use for cure and fatigue life monitoring
Gabriele Chiesura
Wim Van Paepegem
Geert Luyckx
Proefschrift
2017
Interlaminar toughening of composite laminates by electrospun nanofibrous interleaves
Lode Daelemans
Karen De Clerck
Wim Van Paepegem
Proefschrift
2017
Interlaminar toughening of resin transfer molded laminates by electrospun polycaprolactone structures : effect of the interleave morphology
Timo Meireman
Sam van der Heijden
Lode Daelemans
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
P1
Conferentie
2017
Interlaminar toughening of resin transfer moulded laminates by electrospun polycaprolactone : effect of interleave morphology
Timo Meireman
Sam van der Heijden
Lode Daelemans
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2017
Investigating tensile rate-dependence in composite laminates using a hydraulic pulse test bench
Siebe Spronk
Francisco Antonio Gilabert Villegas
Ruben Sevenois
David Garoz Gómez
Wim Van Paepegem
C3
Conferentie
2017
MICROSCALE BASED PREDICTION OF MATRIX CRACK INITIATION IN UD COMPOSITE PLIES SUBJECTED TO MULTIAXIAL FATIGUE WITH ARBITRARY STRESS RATIOS
Ruben Sevenois
Siebe Spronk
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Wim Van Paepegem
C3
Conferentie
2017
Macro- and micro-modeling of crack propagation in encapsulation-based self-healing materials : application of XFEM and cohesive surface techniques
Francisco Antonio Gilabert Villegas
David Garoz Gómez
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MATERIALS & DESIGN
2017
Matching Nonlinearity with Ultrasound
Mansour Kouyate
Mathias Kersemans
Wim Van Paepegem
Joris Degrieck
Arvid Martens
Jannes Daemen
Steven Delrue
Koen Van Den Abeele
C3
Conferentie
2017
Material parameter identification of the elementary ply damage mesomodel using virtual micro-mechanical tests of a carbon fiber epoxy system
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Ruben Sevenois
Siebe Spronk
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2017
Maximizing bandgap width and in-plane stiffness of porous phononic plates for tailoring flexural guided waves : topology optimization and experimental validation
Saeid Hedayatrasa
Mathias Kersemans
Kazem Abhary
Mohammad Uddin
James K. Guest
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MECHANICS OF MATERIALS
2017
Measurement Based Construction and Analysis of Realistic Representative Unit Cells for Textile Laminates.
Ruben Sevenois
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Siebe Spronk
Mathias Kersemans
Wim Van Paepegem
C3
Conferentie
2017
Microscale based prediction of matrix crack initiation in UD composite plies subjected to multiaxial fatigue for all stress ratios and load levels
Ruben Sevenois
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Siebe Spronk
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2017
Mixed experimental-numerical analysis of micro-meso scale damage development in steel fiber reinforced textile composites
Jana Faes
Wim Van Paepegem
Ali Rezaei
Proefschrift
2017
Nano-engineering highly toughened fibre reinforced polymer composites by interleaving electrospun nanofibres for advanced applications
Lode Daelemans
Timo Meireman
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2017
Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers
Sam van der Heijden
Lode Daelemans
Kevin De Bruycker
Robin Simal
Ives De Baere
Wim Van Paepegem
Hubert Rahier
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2017
Numerical and experimental investigation of the shock and steady state pressures in the bird material during bird strike
Frederik Allaeys
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
2017
Numerical prediction of the printable density range of lattice structures for additive manufacturing
Niyazi Tanlak
Dirk Frederik De Lange
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MATERIALS & DESIGN
2017
Numerical study of the time-of-flight pulsed ultrasonic polar scan for the determination of the full elasticity tensor of orthotropic plates
A Martens
Mathias Kersemans
J Daemen
Erik Verboven
Wim Van Paepegem
Joris Degrieck
S Delrue
K Van Den Abeele
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2017
On the visco-elasto-plastic response of additively manufactured polyamide-12 (PA-12) through selective laser sintering
Nicolas Lammens
Mathias Kersemans
Ives De Baere
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2017
Selective laser sintered ankle foot orthosis can support drop foot gait
Egle Vasiliauskaite
Alessio Ielapi
Jan Deckers
Miguel Vermandel
Matthieu De Beule
Wim Van Paepegem
Malcolm Forward
Frank Plasschaert
C3
Conferentie
2017
Simulation of a Circular Phased Array for a Portable Ultrasonic Polar Scan
Jannes Daemen
Mathias Kersemans
Arvid Martens
Erik Verboven
Steven Delrue
Wim Van Paepegem
Joris Degrieck
Koen Van Den Abeele
C3
Conferentie
2017
Structural behaviour and robustness assessment of an infracore® inside bridge deck specimen subjected to static and dynamic local loading
Wouter De Corte
Arne Jansseune
Wim Van Paepegem
Jan Peeters
C1
Conferentie
2017
The concept of segmented wind turbine blades : a review
Mathijs Peeters
Gilberto Santo
Joris Degroote
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
ENERGIES
2017
The effect of gravity in transient fluid-structure interaction simulations of a large wind turbine with composite blades
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
P1
Conferentie
2017
Thermo-elastic properties of general symmetric laminates containing nonuniformly spaced ply cracking
Mohammad Hajikazemi
Wim Van Paepegem
C3
Conferentie
2017
Towards an efficient characterization of the viscoelastic properties of anisotropic media based on the ultrasonic polar scan: experiments and numerical modelling
Arvid Martens
Mathias Kersemans
Jannes Daemen
Steven Delrue
Wim Van Paepegem
Joris Degrieck
Koen Van Den Abeele
C3
Conferentie
2017
Transient aeroelastic simulations of wind turbines with composite blades
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
C1
Conferentie
2017
Transient modelling of the rotor-tower interaction of wind turbines using fluid-structure interaction simulations
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
P1
Conferentie
2017
2016
A comparative study of twill weave reinforced composites under tension-tension fatigue loading: Experiments and meso-modelling
J Xu
SV Lomov
I Verpoest
Subbareddy Daggumati
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2016
A feasibility study of the Master SN curve approach for short fiber reinforced composites
Atul Jain
Wim Van Paepegem
Ignaas Verpoest
Stepan V. Lomov
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF FATIGUE
2016
A set-up to measure the transferred multi-axial impact momentum of a bird strike on a booster vane
Frederik Allaeys
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2016
A shape optimization approach to integrated design and nonlinear analysis of tensioned fabric membrane structures with boundary cables
Tien Dung Dinh
Ali Rezaei
Wonsiri Punurai
Lars De Laet
Marijke Mollaert
Danny Van Hemelrijck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
2016
A statistical treatment of the loss of stiffness during cyclic loading for short fiber reinforced injection molded composites
Atul Jain
Wim Van Paepegem
Ignaas Verpoest
Stepan V. Lomov
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2016
Accuracy of 2D FE models for prediction of crack initiation in nested textile composites with inhomogeneous intra-yarn fiber volume fractions
Jana Faes
Ali Rezaei
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2016
Accurately measuring 2D position using a composed grid pattern and DTFT
Sam Van Dam
Frederik Allaeys
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2016
Acousto-luminescence: sound into light
Mathias Kersemans
Philippe Smet
Nicolas Lammens
Joris Degrieck
Wim Van Paepegem
C3
Conferentie
2016
Assessment of the bird strike robustness of turbofan compressor vanes through advanced numerical modelling and extensive calibration testing
Frederik Allaeys
Wim Van Paepegem
Geert Luyckx
Proefschrift
2016
Avoiding interpenetrations and fibre volume fraction corrections in representative unit cells for textile composites through advanced geometry generation
Ruben Sevenois
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Wim Van Paepegem
C1
Conferentie
2016
Avoiding interpenetrations and the importance of nesting in analytic geometry construction for Representative Unit Cells of woven composite laminates
Ruben Sevenois
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Siebe Spronk
Sander Fonteyn
Marjolein Heyndrickx
Lincy Pyl
Danny Van Hemelrijck
Joris Degrieck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2016
Composite micro-scale model accounting for debonding, strain-rate dependence and damage under impact using an explicit finite element solver
Francisco Antonio Gilabert Villegas
David Garoz Gómez
Ruben Sevenois
Siebe Spronk
Ali Rezaei
Wim Van Paepegem
C1
Conferentie
2016
Critical assessment of the post-breakage performance of blast loaded laminated glazing: experiments and simulations
Joren Pelfrene
Johannes Kuntsche
Sam Van Dam
Wim Van Paepegem
Jens Schneider
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
2016
DEVELOPMENT OF A DEDICATED BENDING SET-UP FOR QUALITY CONTROL OF LIGHTWEIGHT 3D-PRINTED POLYAMIDE-12 STRUCTURES
Nicolas Lammens
Ives De Baere
Wim Van Paepegem
C3
Conferentie
2016
Damage-resistant composites using electrospun nanofibers: a multiscale analysis of the toughening mechanisms
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
ACS APPLIED MATERIALS & INTERFACES
2016
Definition of periodic boundary conditions in explicit dynamic simulations of micro- or meso-scale unit cells with conformal and non-conformal meshes
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Ruben Sevenois
Siebe Spronk
Ali Rezaei
Wim Van Paepegem
C1
Conferentie
2016
Development and validation of a strain-rate and temperature dependent crushing model for expanded polystyrene foam applied in bicycle helmets
Anastasiia Krundaeva
G De Bruyne
Wim Van Paepegem
C1
Conferentie
2016
Drop: weight impact response measurement and prediction for quasi - isotropic carbon - epoxy composite laminates
Ruben Sevenois
Siebe Spronk
Jori De Baerdemaeker
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Mathias Kersemans
Christos Kassapoglou
Wim Van Paepegem
C1
Conferentie
2016
Dynamic compressive strength and crushing properties of expanded polystyrene foam for different strain rates and different temperatures
Anastasiia Krundaeva
Guido De Bruyne
Francesco Gagliardi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2016
Dynamic mode-I delamination of composite laminates using a drop-weight tower and optical data-acquisition
Siebe Spronk
Joris Degrieck
Wim Van Paepegem
C3
Conferentie
2016
Effective use of transient vibration damping results for non-destructive measurements of fibre-matrix adhesion of fibre-reinforced flax and carbon composites
Joachim Vanwalleghem
Ives De Baere
Sofie Huysman
Linsey Lapeire
Kim Verbeken
Alexandru Nila
Steve Vanlanduit
Mia Loccufier
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2016
Fatigue of Ti6Al4V structural health monitoring systems produced by selective laser melting
Maria Strantza
Reza Vafadari Komarolia
Dieter de Baere
Bey Vrancken
Wim Van Paepegem
Isabelle Vandendael
Herman Terryn
Patrick Guillaume
Danny van Hemelrijck
A1
Artikel in een tijdschrift
in
MATERIALS
2016
Finite element prediction of resin pocket geometries around arbitrary inclusions in composites: case study for an embedded optical fiber interrogator
Nicolas Lammens
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2016
Finite element simulation of the woven geometry and mechanical behaviour of a 3D woven dry fabric under tensile and shear loading using the digital element method
Lode Daelemans
Jana Faes
Samir Allaoui
Gilles Hivet
Manuel Dierick
Luc Van Hoorebeke
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2016
Fracture simulation of structural glass by element deletion in explicit FEM
Joren Pelfrene
Sam Van Dam
Ruben Sevenois
Francisco Antonio Gilabert Villegas
Wim Van Paepegem
C1
Conferentie
2016
Gyroscope-based floating lidar design proposal for stable offshore wind velocity profiles
Kameswara Vepa
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
SEA TECHNOLOGY
2016
Implementation of fatigue model for unidirectional laminate based on finite element analysis : theory and practice
D Carrella-Payan
B Magneville
M Hack
T Naito
Y Urushiyama
T Yokozeki
W Yamazaki
Wim Van Paepegem
C1
Conferentie
2016
Implementation of fatigue model for unidirectional laminate based on finite element analysis : theory and practice
D. Carrella-Payan
B. Magneville
M. Hack
C. Lequesne
T. Naito
Y. Urushiyama
W. Yamazaki
T. Yokozeki
Wim Van Paepegem
A2
Artikel in een tijdschrift
in
FRATTURA ED INTEGRITA STRUTTURALE
2016
Increasing the damage resistance of composites by interleaving them with electrospun nanofibrous veils
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C1
Conferentie
2016
Integrated analysis of kinematic form active structures for architectural applications : design of a representative case study
Silke Puystiens
Maarten Van Craenenbroeck
Lars De Laet
Danny Van Hemelrijck
Wim Van Paepegem
Marijke Mollaert
A1
Artikel in een tijdschrift
in
ENGINEERING STRUCTURES
2016
Integrated analysis of kinematic form active structures for architectural applications : experimental verification
Maarten Van Craenenbroeck
Silke Puystiens
Lars De Laet
Danny Van Hemelrijck
Wim Van Paepegem
Marijke Mollaert
A1
Artikel in een tijdschrift
in
ENGINEERING STRUCTURES
2016
Interlaminar toughening of resin transfer molded laminates by electrospun polycaprolactone structures : effect of the interleave morphology
Sam van der Heijden
Lode Daelemans
Timo Meireman
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2016
Mechanical response of 3D-printed lightweight polyamide-12 lattice structures
Nicolas Lammens
Ives De Baere
Wim Van Paepegem
C3
Conferentie
2016
Micro-scale finite element simulation of the viscoelastic damping in unidirectional fiber reinforced composites
Ali Rezaei
David Garoz Gómez
Francisco Antonio Gilabert Villegas
W. Desmet
Wim Van Paepegem
P1
Conferentie
2016
Micro-scale finite element study of the damping in unidirectional fiber reinforced composites
Ali Rezaei
David Garoz Gómez
Jana Faes
Francisco Antonio Gilabert Villegas
Wim Desmet
Wim Van Paepegem
C1
Conferentie
2016
New test set-up for measuring rate-dependent mode-i delamination properties of unidirectional and woven composites
Siebe Spronk
Joris Degrieck
Francisco Antonio Gilabert Villegas
Frederik Allaeys
Wim Van Paepegem
C1
Conferentie
2016
Numerical analysis for tension membrane structures and multiscale modeling for the applied coated fabrics
Tien Dung Dinh
Wim Van Paepegem
Ali Rezaei
Proefschrift
2016
Numerical analysis of the post-fracture response of laminated glass under impact and blast loading
Joren Pelfrene
Wim Van Paepegem
Proefschrift
2016
Numerical simulation of the EN 12600 Pendulum Test for Structural Glass
Joren Pelfrene
Sam Van Dam
Wim Van Paepegem
Johannes Kuntsche
C1
Conferentie
2016
Numerical study of transitional brittle-to-ductile debonding of a capsule embedded in a matrix
Francisco Antonio Gilabert Villegas
David Garoz Gómez
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE INTERFACES
2016
On the orthotropic elasto-plastic material response of additively manufactured polyamide 12
Nicolas Lammens
Ives De Baere
Wim Van Paepegem
C1
Conferentie
2016
On the orthotropy of 3D-printed polyamide 12
Ives De Baere
Nicolas Lammens
Wim Van Paepegem
C3
Conferentie
2016
Optical Miniaturized Interrogator for Load Monitoring of Wind Turbine Rotor Blade
Gabriele Chiesura
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
[0-9]{2}
2016
Production monitoring of a RIM automotive control arm by means of fibre optic sensors
Gabriele Chiesura
Geert Luyckx
Eli Voet
Wim Van Paepegem
Joris Degrieck
Markus Kaufmann
Tom Martens
Alfredo Lamberti
Steve Vanlanduit
P1
Conferentie
2016
RTM production monitoring of the A380 hinge arm droop nose mechanism: a multi-sensor approach
Gabriele Chiesura
Alfredo Lamberti
Yang Yang
Geert Luyckx
Wim Van Paepegem
Steve Vanlanduit
Jan Vanfleteren
Joris Degrieck
A1
Artikel in een tijdschrift
in
SENSORS
2016
Seeing (ultra)sound in real-time through the Acousto-PiezoLuminescent lens
Mathias Kersemans
Simon Michels
Philippe Smet
Wim Van Paepegem
C1
Conferentie
2016
Simulating the behaviour of historical valuable timber structures : a case study on wooden mills
Sebastian Ablorh
Jan Van den Bulcke
Hendrik Botter
Joris Van Acker
David Garoz Gómez
Wim Van Paepegem
C1
Conferentie
2016
TOWARDS DAMAGE RESISTANT COMPOSITES USING ELECTROSPUN NANOFIBERS: A MULTISCALE ANALYSIS OF THE TOUGHENING MECHANISMS
Sam van der Heijden
Lode Daelemans
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2016
TOWARDS DAMAGE RESISTANT COMPOSITES USING ELECTROSPUN NANOFIBERS: A MULTISCALE ANALYSIS OF THE TOUGHENING MECHANISMS
Sam van der Heijden
Lode Daelemans
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2016
Testing for tensile rate-dependence in composite laminates
Siebe Spronk
Mathijs Dolphen
Ives De Baere
Francisco Antonio Gilabert Villegas
Ruben Sevenois
David Garoz Gómez
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2016
The Master SN curve approach : a hybrid multi-scale fatigue simulation of short fiber reinforced composites
Atul Jain
Jose M. Veas
Stefan Straesser
Wim Van Paepegem
Ignaas Verpoest
Stepan V. Lomov
A1
Artikel in een tijdschrift
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2016
The microstructure of capsule containing self-healing materials : a micro-computed tomography study
Jeroen Van Stappen
Tom Bultreys
Francisco Antonio Gilabert Villegas
Xander Hillewaere
David Garoz Gómez
Kim Van Tittelboom
Jelle Dhaene
Nele De Belie
Wim Van Paepegem
Filip Du Prez
et al.
A1
Artikel in een tijdschrift
in
MATERIALS CHARACTERIZATION
2016
The ultrasonic polar scan for composite characterization and damage assessment: past, present and future
Mathias Kersemans
Arvid Martens
Joris Degrieck
Koen Van Den Abeele
Steven Delrue
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
APPLIED SCIENCES-BASEL
2016
Transient modelling of the fluid-structure interaction of wind turbines with composite blades
Gilberto Santo
Mathijs Peeters
Wim Van Paepegem
Joris Degroote
C3
Conferentie
2016
Transverse cracking effect on cross-ply laminates subjected to fatigue: validation with embedded fibre optic sensors and digital image correlation strain measurements
Gabriele Chiesura
Geert Luyckx
Joris Degrieck
Wim Van Paepegem
C3
Conferentie
2016
Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2016
Virtual material characterization process for composite materials: an industrial solution
Laszlo Farkas
Kristof Vanclooster
Hunor Erdelyi
Ruben Sevenois
Stepan V Lomov
Tadashi Naito
Yuta Urushiyama
Wim Van Paepegem
C1
Conferentie
2016
Virtual mechanical testing of a complex 3D woven fabric: a unified simulation methodology for deformation mechanics of textile structures during tension, shear and draping
Lode Daelemans
Jana Faes
Samir Allaoui
Gilles Hivet
Wim Van Paepegem
C1
Conferentie
2016
2015
A micro-computed tomography technique to study the quality of fibre optics embedded in composite materials
Gabriele Chiesura
Geert Luyckx
Eli Voet
Nicolas Lammens
Wim Van Paepegem
Joris Degrieck
Manuel Dierick
Luc Van Hoorebeke
Pieter Vanderniepen
Sanne Sulejmani
et al.
A1
Artikel in een tijdschrift
in
SENSORS
2015
A progressive damage model of textile composites on meso-scale using finite element method: fatigue damage analysis
J Xu
SV Lomov
I Verpoest
Subbareddy Daggumati
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPUTERS & STRUCTURES
2015
A study of tension fabric membrane structures under in-plane loading: nonlinear finite element analysis and validation
Tien Dung Dinh
Ali Rezaei
Silke Puystiens
Maarten Van Craenenbroeck
Kim Carbonez
Lars De Laet
Marijke Mollaert
Danny Van Hemelrijck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2015
Added value of micro-tomography measurements in mechanical characterization of materials: some case studies in engineering applications
Wim Van Paepegem
Lode Daelemans
Joren Pelfrene
Ives De Baere
Nicolas Lammens
Gabriele Chiesura
Geert Luyckx
Stefan Jacques
Joachim Vanwalleghem
Joris Degrieck
C3
Conferentie
2015
Analysis of the numerical and geometrical parameters influencing the simulation of mode I and mode II delamination growth in unidirectional and textile composites
Stefan Jacques
Ives De Baere
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
APPLIED COMPOSITE MATERIALS
2015
Assessing the damage evolution of composites containing embedded fibre optics
Gabriele Chiesura
Geert Luyckx
Manuel Dierick
Wim Van Paepegem
Joris Degrieck
A4
Artikel in een tijdschrift
in
JEC COMPOSITES MAGAZINE
2015
Bisphenol A based polyester binder as an effective interlaminar toughener
Lode Daelemans
Sam van der Heijden
Ives De Baere
Irfan Muhammad
Wim Van Paepegem
Hubert Rahier
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2015
Calibration and correction procedure for quantitative out-of-plane shearography
Filip Zastavnik
Lincy Pyl
Jun Gu
Hugo Sol
Mathias Kersemans
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MEASUREMENT SCIENCE & TECHNOLOGY
2015
Characterization of visco-elastic material parameters by means of the ultrasonic polar scan method
Koen Van Den Abeele
Arvid Martens
Mathias Kersemans
Joris Degrieck
Steven Delrue
Wim Van Paepegem
C3
Conferentie
2015
Development of an experimental test platform for the static and dynamic evaluation of racing bicycle components and for measuring the dynamic bicycle-cyclist interaction
Joachim Vanwalleghem
Wim Van Paepegem
Mia Loccufier
Proefschrift
2015
Direct fracture toughness determination of a ductile epoxy polymer from digital image correlation measurements on a single edge notched bending sample
Klaas Allaer
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2015
Dynamic calibration of a strain gauge based handlebar force sensor for cycling purposes
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conferentie
2015
Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models
A Jain
Y Abdin
Wim Van Paepegem
I Verpoest
SV Lomov
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2015
Energy based method for numerical fatigue analysis of multidirectional carbon fibre reinforced plastics
Peter Wagner
T Bruder
Wim Van Paepegem
M May
A1
Artikel in een tijdschrift
in
PLASTICS RUBBER AND COMPOSITES
2015
Evaluation of different topologies of integrated capillaries in effective structural health monitoring system produced by 3D printing
Maria Strantza
Reza Vafadari Komarolia
Dieter De Baere
Marleen Rombouts
Isabelle Vandendael
Herman Terryn
Michaël Hinderdael
Ali Rezaei
Wim Van Paepegem
Patrick Guillaume
et al.
P1
Conferentie
2015
Experimental and numerical study on influence of embedded interrogator geometry on structural performance of fiber reinforced composites
Nicolas Lammens
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2015
FE tool for drape modelling and resin pocket prediction of fully embedded optical fiber sensor system
Nicolas Lammens
Gabriele Chiesura
Tahira Ahmed
Anders Brodsjo
Eli Voet
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2015
Fast reconstruction of a bounded ultrasonic beam using acoustically induced piezo-luminescence
Mathias Kersemans
Philippe Smet
Nicolas Lammens
Joris Degrieck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
APPLIED PHYSICS LETTERS
2015
Fatigue damage modeling techniques for textile composites: review and comparison with unidirectional composite modeling techniques
Ruben Sevenois
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
APPLIED MECHANICS REVIEWS
2015
Finite element prediction of resin pocket geometry around embedded optical fiber sensors in prepreg composites
Nicolas Lammens
Geert Luyckx
Eli Voet
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2015
Fluid-structure interaction of a wind turbine blade employing a refined finite element model coupled with a blade-element momentum method
Mathijs Peeters
Wim Van Paepegem
C3
Conferentie
2015
From dry yarns to complex 3D woven fabrics: a unified simulation methodology for deformation mechanics of textiles in tension, shear and draping
Lode Daelemans
Wim Van Paepegem
C3
Conferentie
2015
Hybrid multi-scale modelling of damage and fatigue in short fiber reinforced composites
Atul Jain
Stepan Vladimirovitch Lomov
Ignaas Verpoest
Wim Van Paepegem
Proefschrift
2015
Impact behaviour of high performance glass fibre reinforced cement composite laminates
J Wastiels
J Van Ackeren
Diederik Van Nuffel
Wim Van Paepegem
C1
Conferentie
2015
In-depth numerical analysis of the TDCB specimen for characterization of self-healing polymers
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Eleni Tsangouri
Danny Van Hemelrijck
Xander Hillewaere
Filip Du Prez
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
2015
Influence of matrix toughness and interfacial strength on the toughness of epoxy composites with ductile steel fabric reinforcement
Jana Faes
Ali Rezaei
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITE INTERFACES
2015
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres
Sam van der Heijden
Lode Daelemans
Ives De Baere
Huber Rahier
Wim Van Paepegem
Karen De Clerck
C1
Conferentie
2015
Master SN curve approach : a hybrid multiscale approach to fatigue simulation of short fiber composites
Atul Jain
Yasmine Abdin
Stefan Straesser
Wim Van Paepegem
Verpoest Ignaas
Stepan Lomov
P1
Conferentie
2015
Measuring and predicting composite impact damage
Siebe Spronk
Francisco Antonio Gilabert Villegas
Wim Van Paepegem
Joris Degrieck
Andere
2015
Measuring techniques for quality control of composite bicycle frames
Joachim Vanwalleghem
Mathias Kersemans
Wim Van Paepegem
C3
Conferentie
2015
Micro-CT as a well-established technique to investigate the internal damage state of a composite laminate subjected to fatigue
Gabriele Chiesura
Geert Luyckx
Eli Voet
Wim Van Paepegem
Joris Degrieck
Matthieu Boone
Jelle Dhaene
Luc Van Hoorebeke
C1
Conferentie
2015
Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veils
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2015
Non-symmetric stiffness tensor prediction by the Mori-Tanaka scheme - Comments on the article "Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models" [Composite Structures 131 (2015) 692-706]
A Jain
Y Abdin
Wim Van Paepegem
I Verpoest
SV Lomov
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2015
Numerical analysis of the peel test for characterisation of interfacial debonding in laminated glass
Joren Pelfrene
Sam Van Dam
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
2015
Optimization of coating diameter of fiber optic sensors embedded in composite structures under arbitrary loading conditions
Nicolas Lammens
Geert Luyckx
Eli Voet
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
SMART MATERIALS AND STRUCTURES
2015
Recent advances in the ultrasonic polar scan method for characterizing (degraded) fiber reinforced plastics
Mathias Kersemans
Arvid Martens
Wim Van Paepegem
Steven Delrue
Joris Degrieck
Koen Van Den Abeele
P1
Conferentie
2015
SMARTFIBER: miniaturized optical-fiber sensor based health monitoring system
Nicolas Lammens
Geert Luyckx
Eli Voet
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2015
Shape optimization for cable reinforced tension fabric membrane structures
Tien Dung Dinh
Ali Rezaei
Lars De Laet
Marijke Mollaert
Danny Van Hemelrijck
Wim Van Paepegem
C3
Conferentie
2015
Shape optimization of a cruciform geometry for biaxial testing of polymers
Ebrahim Lamkanfi
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2015
Stress concentrations and bonding strength in encapsulation-based self-healing materials
Francisco Antonio Gilabert Villegas
David Garoz Gómez
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MATERIALS & DESIGN
2015
The Ultrasonic Polar Scan as a novel non-destructive material characterization technique
Arvid Martens
Mathias Kersemans
Steven Delrue
Wim Van Paepegem
Joris Degrieck
Koen Van Den Abeele
C3
Conferentie
2015
The influence of mechanical test parameters on the outcome of the end notch flexure test for mode II fracture toughness
Ives De Baere
Stefan Jacques
Wim Van Paepegem
P1
Conferentie
2015
The quasi-harmonic ultrasonic polar scan for material characterization: experiment and numerical modeling
Mathias Kersemans
Arvid Martens
Koen Van Den Abeele
Joris Degrieck
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
ULTRASONICS
2015
The ultrasonic polar scan: past, present and future
Mathias Kersemans
Arvid Martens
Steven Delrue
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Joris Degrieck
Wim Van Paepegem
C1
Conferentie
2015
Time-of-flight recorded pulsed ultrasonic polar scan for elasticity characterization of composites
Arvid Martens
Mathias Kersemans
Joris Degrieck
Wim Van Paepegem
Steven Delrue
Koen Van Den Abeele
C1
Conferentie
2015
Using a polyester binder for the interlaminar toughening of glass/epoxy composite laminates
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
P1
Conferentie
2015
2014
3D shape measurement technique using a printed line pattern
Frederik Allaeys
Geert Luyckx
Wim Van Paepegem
Ljubomir Jovanov
Wilfried Philips
C3
Conferentie
2014
A 3D shape measurement technique that makes use of a printed line pattern
Frederik Allaeys
Geert Luyckx
Christophe Sarrazin
Ljubomir Jovanov
Wilfried Philips
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
EXPERIMENTAL MECHANICS
2014
A comparison between the experimental and theoretical impact pressures acting on a horizontal quasi-rigid cylinder during vertical water entry
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Pascal Lave
Mathias Kersemans
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
OCEAN ENGINEERING
2014
A new elasto-plastic material model for coated fabric
Tien Dung Dinh
Ali Rezaei
Lars De Laet
Marijke Mollaert
Danny Van Hemelrijck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
ENGINEERING STRUCTURES
2014
A new elasto-plastic material model for coated fabric in membrane structures
Tien Dung Dinh
Ali Rezaei
Maarten Van Craenenbroeck
Silke Puystiens
Lars De Laet
Marijke Mollaert
Danny Van Hemelrijck
Wim Van Paepegem
C1
Conferentie
2014
A novel ultrasonic strain gauge for single-sided measurement of a local 3D strain field
Mathias Kersemans
Klaas Allaer
Wim Van Paepegem
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Joris Degrieck
A1
Artikel in een tijdschrift
in
EXPERIMENTAL MECHANICS
2014
A progressive damage model of textile composites on meso-scale using finite element method: static damage analysis
J Xu
SV Lomov
I Verpoest
Subbareddy Daggumati
Wim Van Paepegem
Joris Degrieck
M Olave
A1
Artikel in een tijdschrift
in
JOURNAL OF COMPOSITE MATERIALS
2014
Advanced crack propagation simulation for eSHM system design
Jan Helsen
Reza Vafadari Komarolia
Dieter De Baere
Wim Van Paepegem
Patric Guillaume
C1
Conferentie
2014
An ultrasonic strain gauge
Mathias Kersemans
Klaas Allaer
Joris Degrieck
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
C1
Conferentie
2014
Application of periodic boundary conditions on multiple part finite element meshes for the meso-scale homogenization of textile fabric composites
Stefan Jacques
Ives De Baere
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2014
Blast performance of a sacrificial cladding with composite tubes for protection of civil engineering structures
Wim Van Paepegem
Sivakumar Palanivelu
Joris Degrieck
J Vantomme
B Reymen
D Kakogiannis
D Van Hemelrijck
J Wastiels
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2014
Calibration of quantitative shearography for use in local stiffness identification
Filip Zastavnik
Lincy Pyl
Jun Gu
Hugo Sol
Mathias Kersemans
Wim Van Paepegem
C1
Conferentie
2014
Combined experimental-numerical study to the ultrasonic polar scan for inspection and characterization of (damaged) anisotropic materials
Mathias Kersemans
Wim Van Paepegem
Joris Degrieck
Proefschrift
2014
Comparison of shearography to scanning laser vibrometry as methods for local stiffness identification of beams
Filip Zastavnik
Lincy Pyl
Jun Gu
Hugo Sol
Mathias Kersemans
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
STRAIN
2014
Crack propagation in micro-encapsulated polymer for self-healing: numerical modelling and experimental validation
David Garoz Gómez
Francisco Antonio Gilabert Villegas
Klaas Allaer
Xander Hillewaere
Filip Du Prez
Eleni Tsaungori
Danny Van Hemerlijck
Wim Van Paepegem
C1
Conferentie
2014
Damage evolution assessment of composites with embedded fibre optics by means of Micro Computed Tomography
Gabriele Chiesura
Geert Luyckx
Eli Voet
Nicolas Lammens
Wim Van Paepegem
Joris Degrieck
Manuel Dierick
Luc Van Hoorebeke
Pieter Vanderniepen
C1
Conferentie
2014
Damage signature of fatigued fabric reinforced plastics in the pulsed ultrasonic polar scan
Mathias Kersemans
Ives De Baere
Joris Degrieck
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
EXPERIMENTAL MECHANICS
2014
Detection and localization of delaminations in thin carbon fiber reinforced composites with the ultrasonic polar scan
Mathias Kersemans
Arvid Martens
Koen Van Den Abeele
Joris Degrieck
Filip Zastavnik
Lincy Pyl
Hugo Sol
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
JOURNAL OF NONDESTRUCTIVE EVALUATION
2014
Development of a framework for the construction of meso-scale finite element models of textile composites
Stefan Jacques
Wim Van Paepegem
Proefschrift
2014
Development of a multi-directional rating test method for bicycle frame stiffness
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
C3
Conferentie
2014
Development of a multi-directional rating test method for bicycle stiffness
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conferentie
2014
Development of automated high-fidelity finite element models for large wind turbine blades
Mathijs Peeters
Wim Van Paepegem
C1
Conferentie
2014
Effect of silane coupling agent on interfacial strength of stainless steel
AK Ghosh
E Bertels
Klaas Allaer
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2014
Errors in shearography measurements due to the creep of the PZT shearing actuator
Filip Zastavnik
Lincy Pyl
Jun Gu
Hugo Sol
Mathias Kersemans
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MEASUREMENT SCIENCE & TECHNOLOGY
2014
Experimental investigation of the water entry of rigid and deformable bodies using time-resolved particle image velocimetry
Alexandru Nila
Steve Vanlanduit
Wim Van Paepegem
Proefschrift
2014
Experimental study of the slamming induced pressures, forces and deformations of quasi-rigid and deformable bodies during vertical water entry
Diederik Van Nuffel
Wim Van Paepegem
Ives De Baere
Proefschrift
2014
Experimental study on the dynamic behaviour of glass fitted with safety window film with a small-scale drop weight set-up
Sam Van Dam
Joren Pelfrene
S De Pauw
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
2014
External damping losses in measuring the vibration damping properties in lightly damped specimens using transient time-domain methods
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
JOURNAL OF SOUND AND VIBRATION
2014
Extraction of bulk wave characteristics from a pulsed ultrasonic polar scan
Mathias Kersemans
Nicolas Lammens
Joris Degrieck
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
WAVE MOTION
2014
Fatigue models for woven textile composite laminates
Wim Van Paepegem
Hoofdstuk in een boek
in
Fatigue of textile composites
2014
Fatigue testing and online inspection of carbon textile composites for aeronautical applications
Wim Van Paepegem
Hoofdstuk in een boek
in
Fatigue of textile composites
2014
Field tests with an instrumented bicycle for comfort measurements
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
C3
Conferentie
2014
Finite element prediction of resin pocket geometries around optical fibers embedded in laminated composites
Nicolas Lammens
Gabriele Chiesura
Eli Voet
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2014
Identification of the elastic properties of isotropic and orthotropic thin-plate materials with the pulsed ultrasonic polar scan
Mathias Kersemans
Arvid Martens
Nicolas Lammens
Koen Van Den Abeele
Joris Degrieck
Filip Zastavnik
Lincy Pyl
Hugo Sol
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
EXPERIMENTAL MECHANICS
2014
Improved accuracy in the determination of flexural rigidity of textile fabrics by the Peirce cantilever test (ASTM D1388)
Nicolas Lammens
Mathias Kersemans
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
TEXTILE RESEARCH JOURNAL
2014
In-plane mechanical properties of ductile composites with unidirectional stainless steel fibre reinforced layers
Klaas Allaer
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2014
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres
Sam van der Heijden
Lode Daelemans
Bert De Schoenmaker
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2014
Large scale manufacturing of lightweight 3D multifunctional composites
A Almansa
S Menegazzi
Wim Van Paepegem
L Bateup
E Kny
C1
Conferentie
2014
Local stiffness identification of beams using shearography and inverse methods
Filip Zastavnik
Lincy Pyl
Hugo Sol
Mathias Kersemans
Wim Van Paepegem
C1
Conferentie
2014
Master SN curce method for short fiber composites: theory and experimental validation
A Jain
JM Veas
S Lomov
Y Abdin
Wim Van Paepegem
C1
Conferentie
2014
Meso-scale analysis of ductile steel fabric/epoxy composites: numerical modelling and experimental validation
Jana Faes
Ali Rezaei
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2014
Modeling of self-healing in concrete and polymeric materials
Francisco Antonio Gilabert Villegas
David Garoz Gómez
Wim Van Paepegem
C3
Conferentie
2014
New approach for the construction of meso-scale finite element models of textile composites with periodic boundary conditions
Stefan Jacques
Ives De Baere
Wim Van Paepegem
C1
Conferentie
2014
Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan
Mathias Kersemans
Ives De Baere
Joris Degrieck
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2014
Numerical and experimental study of the peel test for assessment of the glass-PVB interface properties in laminated glass
Joren Pelfrene
Sam Van Dam
Wim Van Paepegem
C1
Conferentie
2014
Obtaining a through the thickness reinforced composite joint
Ives De Baere
Marino Quaresimin
Joris Degrieck
Wim Van Paepegem
C3
Conferentie
2014
On the in-plane mechanical properties of stainless steel fibre reinforced ductile composites
Klaas Allaer
Ives De Baere
Pascal Lava
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2014
Optical fiber coating optimization tool for composite embedded health monitoring purposes through a novel transfer matrix method
Nicolas Lammens
Geert Luyckx
Eli Voet
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2014
Pitfalls in the experimental recording of ultrasonic (backscatter) polar scans for material characterization
Mathias Kersemans
Wim Van Paepegem
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Joris Degrieck
A1
Artikel in een tijdschrift
in
ULTRASONICS
2014
Scholte-Stoneley waves on an immersed solid dihedral : generation, propagation and scattering effects
Ebrahim Lamkanfi
Nico F Declercq
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
ULTRASONICS
2014
Sensing opportunities for rotor blades considering their entire lifecycle
Gabriele Chiesura
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2014
Study of the interlaminar quasi-static and fatigue behaviour of a carbon PPS using the single lapshear geometry
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2014
Study on the use of cohesive zone modelling for assessment of adhesive properties at the glass-PVB interface
Joren Pelfrene
Sam Van Dam
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2014
The pulsed ultrasonic backscatter polar scan and its applications for NDT and material characterization
Mathias Kersemans
Wim Van Paepegem
Babs Lemmens
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Joris Degrieck
A1
Artikel in een tijdschrift
in
EXPERIMENTAL MECHANICS
2014
The pulsed ultrasonic backscatter polar scan for NDT and material evaluation
Mathias Kersemans
Wim Van Paepegem
Koen Van Den Abeele
Babs Lemmens
Lincy Pyl
Filip Zastavnik
Hugo Sol
Joris Degrieck
C1
Conferentie
2014
The “cycle jump” concept for modelling high cycle fatigue in composite materials
Wim Van Paepegem
Hoofdstuk in een boek
in
Fatigue of textile composites
2014
Thermal strain effects in thermoplastic satin weave composite laminates
Eli Voet
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2014
Ultrasonic characterization of subsurface 2D corrugation
Mathias Kersemans
Wim Van Paepegem
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Joris Degrieck
A1
Artikel in een tijdschrift
in
JOURNAL OF NONDESTRUCTIVE EVALUATION
2014
Ultrasonic polar scan imaging of fatigued fiber reinforced composites
Mathias Kersemans
Ives De Baere
Joris Degrieck
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
C1
Conferentie
2014
2013
A PIV-based method for estimating slamming loads during water entry of rigid bodies
Alexandru Nila
S Vanlanduit
S Vepa
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MEASUREMENT SCIENCE AND TECHNOLOGY
2013
A micro-computer tomography technique to study the interaction between the composite material and an embedded optical fiber sensor
Gabriele Chiesura
Geert Luyckx
Nicolas Lammens
Wim Van Paepegem
Joris Degrieck
Manuel Dierick
Luc Van Hoorebeke
C3
Conferentie
2013
A new experimental test set-up for investigating impact resistance of laminated glass
Sam Van Dam
Joren Pelfrene
Wim Van Paepegem
Joris Degrieck
David Lecompte
John Vantomme
P1
Conferentie
2013
A novel versatile multilayer hybrid stress solid-shell element
Khawaja Kamran Rah
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPUTATIONAL MECHANICS
2013
Accurate measurement of high strain gradients in micro-strain applications with 2D digital image correlation
Pascal Lava
Wim Van Paepegem
Sam Coppieters
Ives De Baere
Dimitri Debruyne
P1
Conferentie
2013
An optimal versatile partial hybrid stress solid-shell element for the analysis of multilayer composites
Khawaja Kamran Rah
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
2013
Assessment of the interlaminar behaviour of a carbon fabric reinforced thermoplastic lap shear specimen under quasi-static and tension-tension fatigue loading
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2013
Changes in mechanical behaviour of a glass fibre reinforced epoxy by adding polyamide 6 nanofibres
Ives De Baere
Bert De Schoenmaker
Sam van der Heijden
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2013
Determination of the fiber direction and the C-tensor of a UD carbon/epoxy composite by means of the ultrasonic polar scan
Mathias Kersemans
Nicolas Lammens
Wim Van Paepegem
Koen Van Den Abeele
Filip Zastavnik
Jun Gu
Lincy Pyl
Hugo Sol
Joris Degrieck
C1
Conferentie
2013
Development of automated finite element models for large wind turbine blades
Mathijs Peeters
Wim Van Paepegem
C3
Conferentie
2013
Digital image correlation technique applied to laminated glass plates under free air blast loading
Sam Van Dam
Joren Pelfrene
Ken Spranghers
David Lecompte
Wim Van Paepegem
C3
Conferentie
2013
Digital image correlation technique applied to laminated glass plates under free air blast loading
Sam Van Dam
Joren Pelfrene
K Sranghers
D Lecompte
Wim Van Paepegem
C1
Conferentie
2013
Effect of electrospun polyamide 6 nanofibres on the mechanical properties of a glass fibre/epoxy composite
Bert De Schoenmaker
Sam van der Heijden
Ives De Baere
Wim Van Paepegem
Karen De Clerck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2013
Efficient extraction of the directional wave curves from a pulsed ultrasonic polar scan experiment
Mathias Kersemans
Nicolas Lammens
Wim Van Paepegem
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Joris Degrieck
C1
Conferentie
2013
Experimental and numerical study of the impact behaviour of 3D woven thermoplastic composites for automotive applications
Stefan Jacques
M Fazeli
M de la Fuente
M Dierick
Wim Van Paepegem
C1
Conferentie
2013
Fatigue and post-fatigue stress-strain analysis of a 5-harness satin weave carbon fibre reinforced composite
S Daggumati
Ives De Baere
Wim Van Paepegem
Joris Degrieck
J Xu
SV Lomov
Ignace Verpoest
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2013
Impact of lens distortions on strain measurements obtained with 2D digital image correlation
Pascal Lava
Wim Van Paepegem
S Coppieters
Ives De Baere
Y Wang
D Debruyne
A1
Artikel in een tijdschrift
in
OPTICS AND LASERS IN ENGINEERING
2013
Induced drilling strains in glass fibre reinforced epoxy composites
JP Nobre
JH Stiffel
A Nau
JC Outeiro
AC Batista
Wim Van Paepegem
B Scholtes
A1
Artikel in een tijdschrift
in
CIRP ANNALS-MANUFACTURING TECHNOLOGY
2013
Integrated analysis of kinematic form active stuctures-Part B-numerical simulation of KFAS
Silke Puystiens
Maarten Van Craenenbroeck
Danny Van Hemelrijck
Wim Van Paepegem
Kim Carbonez
Tien Dung Dinh
Marijke Mollaert
C1
Conferentie
2013
Micromechanics and fatigue life simulation of random fiber reinforced composites
Atul Jain
Stepan Lomov
Yasmine Abdin
Ignaas Verpoest
Wim Van Paepegem
Hack Michael
C1
Conferentie
2013
Model for partially debonded inclusions in the framework of mean-field homogenization
Atul Jain
Stepan Lomov
Yasmin Abdin
Wim Van Paepegem
Stefan Straesser
Ignaas Verpoest
C1
Conferentie
2013
Modelling fracture in micro-encapsulated self-healing materials with combined XFEM and cohesive surface techniques
Francisco Antonio Gilabert Villegas
David Garoz Gómez
Wim Van Paepegem
C3
Conferentie
2013
Modifying the crack growth in a glass fiber reinforced epoxy by adding polyamide 6 nanofibers
Ives De Baere
Bert De Schoenmaker
Sam van der Heijden
Wim Van Paepegem
Karen De Clerck
C1
Conferentie
2013
Newo approach for the construction of meso-scale finite element models of textile composites with periodic boundary conditions
Stefan Jacques
Ives De Baere
Wim Van Paepegem
C1
Conferentie
2013
Numerical simulation of elastic, fracture and post-failure response of monolithic and laminated glass under impact loading
Joren Pelfrene
Sam Van Dam
Joris Degrieck
Wim Van Paepegem
P1
Conferentie
2013
Optimal low-order fully integrated solid-shell elements
Khawaja Kamran Rah
Wim Van Paepegem
Anne-Marie Habraken
Joris Degrieck
Ricardo J Alves de Sousa
Robertt AF Valente
A1
Artikel in een tijdschrift
in
COMPUTATIONAL MECHANICS
2013
Pitfalls in experimental recording of ultrasonic polar scans for composite material characterization
Mathias Kersemans
Wim Van Paepegem
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Joris Degrieck
C1
Conferentie
2013
Pixel-level robust digital image correlation
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
OPTICS EXPRESS
2013
Pseudo-grain discretization and full Mori Tanaka formulation for random heterogeneous media : predictive abilities for stresses in individual inclusions and the matrix
Atul Jain
Stepan V. Lomov
Yasmine Abdin
Ignaas Verpoest
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2013
Response of pultruded composite tubes subjected to dynamic and impulsive axial loading
D Kakogiannis
SCK Yuen
S Palanivelu
D Van Hemelrijck
Wim Van Paepegem
J Wastiels
J Vantomme
GN Nurick
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2013
Sensor design for outdoor racing bicycle field testing for human vibration comfort evaluation
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MEASUREMENT SCIENCE & TECHNOLOGY
2013
Slamming wave impact on cylindrical structures: model tests including a rigid and deformable cylinder
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Julien De Rouck
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2013
Sress-strain analysis of a carbon PPS during and after fatigue loading conditions
Wim Van Paepegem
Ives De Baere
Subareddy Daggumati
Christian Hochard
J Xu
Stepan Lomov
Ignace Verpoest
Joris Degrieck
C3
Conferentie
2013
Static and fatigue behaviour of a satin weave carbon/PPS thermoplastic composite : experimental results and validation with meso-scale modelling
Wim Van Paepegem
Ives De Baere
Subbareddy Daggumati
Mathias Kersemans
Jian Xu
Stepan Lomov
Ignaas Verpoest
Joris Degrieck
C1
Conferentie
2013
Study on the parameters influencing the accuracy and reproducibility of dynamic pressure measurements at the surface of a rigid body during water impact
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
EXPERIMENTAL MECHANICS
2013
The effect of electrospun polyamide 6 nanofibres on the mechanical properties of a glass fibre/epoxy composite
Bert De Schoenmaker
Sam van der Heijden
Ives De Baere
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2013
The quasi-harmonic ultrasonic polar scan for material characterization: experiment and numerical modeling
Mathias Kersemans
Wim Van Paepegem
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Joris Degrieck
C1
Conferentie
2013
The small wind turbine field lab extensive field tests for small wind turbines
Karel Van Wyngene
Joannes Laveyne
Jeroen De Kooning
Kurt Stockman
Peter Sergeant
Wim Van Paepegem
Dick Botteldooren
Jeroen De Maeyer
Greet Van Eetvelde
Lieven Vandevelde
A4
Artikel in een tijdschrift
in
WWEA QUARTERLY BULLETIN
2013
The small wind turbine field lab extensive field tests for small wind turbines
Karel Van Wyngene
Joannes Laveyne
Jeroen De Kooning
Kurt Stockman
Peter Sergeant
Wim Van Paepegem
Dick Botteldooren
Jeroen De Maeyer
Greet Van Eetvelde
Lieven Vandevelde
A4
Artikel in een tijdschrift
in
WWEA Quarterly Bulletin
2013
The use of nanofibre structures in fibre-reinforced composites: challenges and opportunities
Karen De Clerck
Sam van der Heijden
Bert De Schoenmaker
Ives De Baere
Wim Van Paepegem
Hubert Rahier
C3
Conferentie
2013
The use of nanofibre structures in fibre-reinforced composites: challenges and opportunities
Karen De Clerck
Sam van der Heijden
Bert De Schoenmaker
Ives De Baere
Wim Van Paepegem
Hubert Rahier
C1
Conferentie
2013
Towards a more accurate computational model for tensile fabric structures : part A : exerimental approach
Maarten Van Craenenbroeck
Silke Puystiens
Lars De Laet
Jan Roekens
Danny Van Hemelrijck
Wim Van Paepegem
Marijke Mollaert
C1
Conferentie
2013
2012
'Gradient' polar scan technique for material characterization
Mathias Kersemans
Wim Van Paepegem
Nicolas Lammens
Koen Van Den Abeele
Filip Zastavnik
Jun Gu
Hugo Sol
Joris Degrieck
P1
Conferentie
2012
A finite element model capable of predicting resin pockets for arbitrary inclusions in composite laminates
Nicolas Lammens
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2012
A mixed solid-shell element for the analysis of laminated composites
Khawaja Kamran Rah
Wim Van Paepegem
AM Habraken
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
2012
A novel speckle pattern-adaptive digital image correlation approach with robust strain calculation
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
OPTICS AND LASERS IN ENGINEERING
2012
A study on the effect of the clearance on the contact stresses and kinematics of polymeric composite journal bearings under reciprocating sliding conditions
Ali Rezaei
Wim Van Paepegem
Wouter Ost
Patrick De Baets
Joris Degrieck
A1
Artikel in een tijdschrift
in
TRIBOLOGY INTERNATIONAL
2012
A three-frame digital image correlation (DIC) method for the measurement of small displacements and strains
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MEASUREMENT SCIENCE & TECHNOLOGY
2012
Adaptive finite element simulation of wear evolution in radial sliding bearings
Ali Rezaei
Wim Van Paepegem
Patrick De Baets
Wouter Ost
Joris Degrieck
A1
Artikel in een tijdschrift
in
WEAR
2012
An experimental comparison of vertical water enty between a rigid cylindrical body and a deformable cylindrical composite shell
Diederik Van Nuffel
Ives De Baere
Julien De Rouck
Joris Degrieck
Wim Van Paepegem
P1
Conferentie
2012
An inverse method for local stiffness identification based on scanning laser measurements
Jun Gu
Hugo Sol
Filip Zastavnik
Wim Van Paepegem
Mathias Kersemans
C3
Conferentie
2012
Assessment of the infrared welding process for a carbon fabric reinforced pps
Klaas Allaer
Ives De Baere
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2012
Betriebsfestigkeitsbewertung von Faserverbundwerkstoffen
Atul Jain
Michael Hack
Ignaas Verpoest
Stepan Lomov
Wim Van Paepegem
Jan Seyfarth
C1
Conferentie
2012
Calibration of dynamic piezoelectric force transducers using the hopkinson bar technique
Diederik Van Nuffel
Jan Peirs
Ives De Baere
Patricia Verleysen
Joris Degrieck
Wim Van Paepegem
C3
Conferentie
2012
Calibration of dynamic piezoelectric force transducers using the hopkinson bar technique
Diederik Van Nuffel
Jan Peirs
Ives De Baere
Patricia Verleysen
Joris Degrieck
Wim Van Paepegem
P1
Conferentie
2012
Condition monitoring of laminated composite sliding bearings using embedded capacitors
Ali Rezaei
Pieter Rombouts
Wim Van Paepegem
Patrick De Baets
Joris Degrieck
Ludo Weyten
A1
Artikel in een tijdschrift
in
SMART MATERIALS AND STRUCTURES
2012
Damage identification of prepreg composites subject to accelerated fatigue tests
L Pyl
H Sol
F Zastavnik
Wim Van Paepegem
Mathias Kersemans
C1
Conferentie
2012
Design of an instrumented bicycle for the evaluation of bicycle dynamics and its relation with the cyclist's comfort
Joachim Vanwalleghem
Frederik Mortier
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conferentie
2012
Elastic properties of orthotropic composites using the US polar scan method
Mathias Kersemans
Nicolas Lammens
Geert Luyckx
Joris Degrieck
Wim Van Paepegem
A4
Artikel in een tijdschrift
in
JEC COMPOSITES
2012
Experimental assesment of infrared welded bonds using lapshear, double cantilever beam and end notch flexure tests for a carbon fabric reinforced thermoplastic
Klaas Allaer
Ives De Baere
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2012
Experimental assesment of infrared welded bonds using lapshear, double cantilever beam and end notch flexure tests for a carbon fabric reinforced thermoplastic
Klaas Allaer
Ives De Baere
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2012
Experimental study of the crack growth of a carbon fabric reinforced PPS under mode I and mode II loading conditions
Ives De Baere
Stefan Jacques
Mathias Kersemans
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2012
Experimental study of the crack growth of a carbon fabric reinforced PPS under mode I and mode II loading conditions
Ives De Baere
Stefan Jacques
Mathias Kersemans
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2012
Experimental study on the impact loads acting on a horizontal rigid cylinder during vertical water entry
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
P1
Conferentie
2012
Fatigue behaviour of infrared welded joints in fibre reinforced thermoplastics
Ives De Baere
Klaas Allaer
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2012
Fatigue life simulation on fiber reinforced composites : overview and methods of analysis for the automotive industry
Atul Jain
Ignaas Verpoest
Michael Hack
Stepan Lomov
Laurent Adam
Wim Van Paepegem
A4
Artikel in een tijdschrift
in
SAE INTERNATIONAL
2012
Fatigue life simulation on fiber reinforced composites: overview and methods of analysis for the automotiva industry
Atul Jain
Ignaas Verpoest
Michael Hack
Stepan Lomov
Laurent Adam
Wim Van Paepegem
C1
Conferentie
2012
Feasibility study of fusion bonding for carbon fabric reinforced Polyphenylene Sulphide by hot-tool welding
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
2012
Full-field stress analysis by holographic phase-stepping implementation of the photoelastic-coating method
T Lyubenova
E Stoykova
B Ivanov
Wim Van Paepegem
Augustijn Degrieck
V Sainov
A1
Artikel in een tijdschrift
in
PHYSICA SCRIPTA
2012
Fully coupled time domain modelling of 3D floating bodies and mooring systems in regular and irregular sea states
Kameswara Vepa
Diederik Van Nuffel
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2012
High speed particle image velocimetry measurements during water entry of rigid and deformable bodies
Alexandru Nila
Steve Vanlanduit
Kameswara Vepa
Diederik Van Nuffel
Wim Van Paepegem
Joris Degroote
Jan Vierendeels
C1
Conferentie
2012
High-performance lightweight multifunctional composites based on 3D-shaped multilayered woven fabrics
Monireh Fazeli
Roland Kleicke
Chokri Cherif
Wim Van Paepegem
C1
Conferentie
2012
Impact of lens distrortions on strain measurements obtained with digital image correlation
P Lava
S Coppieters
D Debruyne
Wim Van Paepegem
Ives De Baere
C1
Conferentie
2012
Implications of structural discontinuities for water coupled NDT and SHM: experiment and modeling
Mathias Kersemans
Koen Van Den Abeele
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2012
Implications of structural discontinuities for water coupled NDT and SHM: experiment and modeling
Mathias Kersemans
Koen Van Den Abeele
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2012
Influence of specimen geometry on the fatigue behavior of a carbon fabric reinforced pps
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2012
Infrared welding of carbon fabric reinforced thermoplastics
Klaas Allaer
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A4
Artikel in een tijdschrift
in
JEC COMPOSITES
2012
Instrumentation of a racing bicycle for outdoor field testing and evaluation of the cyclist's comfort perception
Joachim Vanwalleghem
Frederik Mortier
Ives De Baere
Mia Loccufier
Wim Van Paepegem
C3
Conferentie
2012
Instrumentation of a racing bicycle for outdoor field testing and evaluation of the cyclist's comfort perception
Joachim Vanwalleghem
Frederik Mortier
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conferentie
2012
Interlaminar behavior of infrared welded joints of carbon fabric-reinforced polyphenylene sulfide
Ives De Baere
Klaas Allaer
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER COMPOSITES
2012
Large-scale blast loading of a composite tube array for protection of civil engineering structures
Wim Van Paepegem
Sivakumar Palanivelu
Joris Degrieck
J Vantomme
B Reymen
D Kakogiannis
D Van Hemelrijck
J Wastiels
C1
Conferentie
2012
Leakage and scattering of a leaky lamb wave by a structural discontinuity: acousto-optics and FEM
Mathias Kersemans
Wim Van Paepegem
Koen Van Den Abeele
Joris Degrieck
P1
Conferentie
2012
Modelling gear contact with twin-disc setup
Jacob Sukumaran
Matyas Ando
Patrick De Baets
Vanessa Rodriguez Fereira
Laslo Szabadi
Gabor Kalacska
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
TRIBOLOGY INTERNATIONAL
2012
Novel digital image correlation approaches for the measurement of heterogeneous displacements and strains
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
Proefschrift
2012
Polar scan technique for material characterization and identification of new operating regimes
Mathias Kersemans
Wim Van Paepegem
Diederik Van Nuffel
Geert Luyckx
Ives De Baere
Filip Zastavnik
Jun Gu
Hugo Sol
Koen Van Den Abeele
Joris Degrieck
C1
Conferentie
2012
Polar scan technique for material characterization and identification of new operating regimes
Mathias Kersemans
Wim Van Paepegem
Diederik Van Nuffel
Geert Luyckx
Ives De Baere
Filip Zastavnik
Jun Gu
Hugo Sol
Koen Van Den Abeele
Joris Degrieck
P1
Conferentie
2012
Practical aspects in measuring vibration damping of materials
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
C3
Conferentie
2012
Practical aspects in measuring vibration damping of materials
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conferentie
2012
Racing bicycle dynamics and the cyclist's comfort evaluated through outdoor field testing
Joachim Vanwalleghem
Frederik Mortier
Wim Van Paepegem
Mia Loccufier
Joris Degrieck
C3
Conferentie
2012
Residual stresses in cold-rolled steel tubes: validation of the welding process
Maarten De Strycker
Guido De Roeck
Dimitri Debruyne
Wim Van Paepegem
Proefschrift
2012
Simulating dynamic glass fracture in an air blast event
Joren Pelfrene
Sam Van Dam
Wim Van Paepegem
C3
Conferentie
2012
Slamming wave impact on cylindrical structures: model tests including a rigid and deformable cylinder
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Julien De Rouck
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2012
Study of the mode I and mode II interlaminar behaviour of a carbon fabric reinforced thermoplastic
Ives De Baere
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2012
The in-plane shear behaviour of a carbon fabric reinforced thermoplastic under quasi-static and fatigue loading conditions
Ives De Baere
Wim Van Paepegem
Joris Degrieck
Hoofdstuk in een boek
in
Fiber-reinforced composites
2012
The influence of polyamide 6 nanofibres on the mechanical properties of glass fibre/epoxy composites
Bert De Schoenmaker
Ives De Baere
Wim Van Paepegem
Karen De Clerck
C3
Conferentie
2012
Using capacitors in predic tive condition monitoring of laminated polymer composite bearings
Ali Rezaei
Pieter Rombouts
Wim Van Paepegem
Patrick De Baets
Joris Degrieck
Ludo Weyten
C1
Conferentie
2012
Using the incremental Hole-drilling technique for measuring residual stresses in fibre-reinforce polymer composites
JP Nobre
AC Batista
A Nau
Wim Van Paepegem
B Scholtes
C1
Conferentie
2012
Versatile solid-shell elements for the analysis of multilayer composites
Khawaja Kamran Rah
Wim Van Paepegem
Joris Degrieck
Proefschrift
2012
2011
A partial hybrid stress solid-shell element for the analysis of laminated composites
Khawaja Kamran Rah
Wim Van Paepegem
AM Habraken
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
2011
Applicability of composite Charpy impact method for strain hardening textile reinforced cementitious composites
Johan Van Ackeren
Johan Blom
Dimitrios Kakogiannis
Jan Wastiels
Danny Van Hemelrijck
Sivakumar Palanivelu
Wim Van Paepegem
John Vantomme
P1
Conferentie
2011
Application of digital image correlation technique for measuring dynamic parameters during impact loading
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Johan Van Ackeren
Dimitrios Kakogiannis
Jan Wastiels
Danny Van Hemelrijck
John Vontomme
C1
Conferentie
2011
Close-range blast loading on empty recyclable metal beverage cans for use in sacrificial cladding structure
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Bruno Reymen
Jean-Marie Ndambi
John Vontomme
Dimitrios Kakogiannis
Jan Wastiels
Danny Van Hemelrijck
A1
Artikel in een tijdschrift
in
ENGINEERING STRUCTURES
2011
Comparative study of slamming loads on cylindrical structures
Kameswara Vepa
Diederik Van Nuffel
Wim Van Paepegem
Joris Degroote
Jan Vierendeels
P1
Conferentie
2011
Comparison of different techniques for strain monitoring of a biaxially loaded cruciform specimen
C Ramault
A Makris
D Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
STRAIN
2011
Concurrent modelling and experimental analysis of meso-scale strain fields and damage in woven composites under static and fatigue tensile loading
Subbareddy Daggumati
Wim Van Paepegem
Joris Degrieck
Proefschrift
2011
Crushing and energy absorption performance of different geometrical shapes of small-scale glass/polyester composite tubes under quasi-static loading conditions
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
John Vontomme
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2011
Dense and accurate motion and strain estimation in high resolution speckle images using an image-adaptive approach
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
P1
Conferentie
2011
Determining the stress-strain behaviour at large strains from high strain rate tensile and shear experiments
Jan Peirs
Patricia Verleysen
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
2011
Energy absorption of crushable tubes for protective structures under static, impact and blast loading
Sivakumar Palanivelu
Wim Van Paepegem
John Vantomme
Proefschrift
2011
Evaluation of the transversal strain state in a satin weave composite using fibre Bragg gratings
Eli Voet
Geert Luyckx
Joris Degrieck
Wim Van Paepegem
P1
Conferentie
2011
Experimental and numerical polar scans of several anisotropic materials using pulsed and harmonic ultrasonic beams
Mathias Kersemans
Ives De Baere
Wim Van Paepegem
Joris Degrieck
Filip Zastavnik
Jun Gu
Hugo Sol
P1
Conferentie
2011
Experimental study and numerical simulation of the large-scale testing of polymeric composite journal bearings: three-dimensional and dynamic modeling
Ali Rezaei
Wouter Ost
Wim Van Paepegem
Patrick De Baets
Joris Degrieck
A1
Artikel in een tijdschrift
in
WEAR
2011
Experimentally induced errors in digital image correlation measurement of small strains with large gradients
Ives De Baere
Wim Van Paepegem
Nicolas Lammens
Pascal Lava
Dimitri Debruyne
Corneliu Cofaru
Wilfried Philips
Joris Degrieck
P1
Conferentie
2011
Fatigue testing for polymer matrix composites
Wim Van Paepegem
Hoofdstuk in een boek
in
Creep and fatigue in polymer matrix composites
2011
Finite element framework for simulation of the contact and wear of composite radial bearings in dry sliding conditions
Ali Rezaei
Wim Van Paepegem
Patrick De Baets
Proefschrift
2011
Finite element modelling and experimental study of oblique soccer ball bounce
Ali Rezaei
Rudy Verhelst
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
JOURNAL OF SPORTS SCIENCES
2011
Fluid-structure interaction simulation of the breaking wave slamming on an absorber for a wave-energy converter
Joris Degroote
Jan Vierendeels
Kameswara Vepa
Wim Van Paepegem
P1
Conferentie
2011
Fusion bonding of carbon fabric reinforced polyphenylene sulphide
Ives De Baere
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2011
High speed particle image velocimetry measurements during water entry of rigid bodies
Alexandru Nila
Steve Vanlanduit
Kameswara Vepa
Diederik Van Nuffel
Wim Van Paepegem
Joris Degroote
Jan Vierendeels
C1
Conferentie
2011
In-situ local strain measurement in textile composites with embedded optical fibre sensors
Subareddy Daggumati
Eli Voet
Ives De Baere
Wim Van Paepegem
Joris Degrieck
J Xu
S Lomov
I Verpoest
P1
Conferentie
2011
Local strain in a 5-harness satin weave composite under static tension: part I: experimental analysis
Subbareddy Daggumati
Eli Voet
Wim Van Paepegem
Joris Degrieck
J Xu
SV Lomov
I Verpoest
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2011
Local strain in a 5-harness satin weave composite under static tension: part II: Meso-FE analysis
Subbareddy Daggumati
Wim Van Paepegem
Joris Degrieck
Tomas Praet
Benedict Verhegghe
J Xu
SV Lomov
I Verpoest
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2011
Local strain variation in the plies of a satin weave composite: experimental vs. numerical
Subbareddy Daggumati
Eli Voet
Wim Van Paepegem
Joris Degrieck
Tomas Praet
Benedict Verhegghe
J Xu
SV Lomov
I Verpoest
C3
Conferentie
2011
Low velocity axial impact crushing performance of empty recyclable metal beverage cans
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Stijn De Pauw
John Vontomme
Jan Wastiels
Dimitrios Kakogiannis
Danny Van Hemelrijck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
2011
Macro-mechanical and microscopic study of the fatigue damage behaviour of a carbon fabric/PPS thermoplastic composite
Ives De Baere
Linsey Lapeire
Wim Van Paepegem
Subareddy Daggumati
Kim Verbeken
Joris Degrieck
C1
Conferentie
2011
Measuring thermal strains during the welding of tubes with DIC
Maarten De Strycker
Pascal Lava
Wim Van Paepegem
Luc Schueremans
Dimitri Debruyne
C1
Conferentie
2011
Measuring welding deformations with the digital image correlation technique
M De Strycker
P Lava
Wim Van Paepegem
L Schueremans
D Debruyne
A1
Artikel in een tijdschrift
in
WELDING JOURNAL
2011
Nondestructive characterization of the elastic properties of orthotropic composites with ultrasound
Mathias Kersemans
Wim Van Paepegem
Filip Zastavnik
Jun Gu
Hugo Sol
Joris Degrieck
C1
Conferentie
2011
Numerical study of composite structures subjected to slamming loads using Smoothed Particle Hydrodynamics (SPH)
Kameswara Vepa
Diederik Van Nuffel
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2011
Numerical study of composite structures subjected to slamming loads using Smoothed Particle Hydrodynamics (SPH)
Kameswara Vepa
Diederik Van Nuffel
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2011
On the (fatigue) damage behaviour of a carbon-reinforced PPS
Ives De Baere
Wim Van Paepegem
Subbareddy Daggumati
Linsey Lapeire
Kim Verbeken
Joris Degrieck
C3
Conferentie
2011
On the tension-tension fatigue behaviour of a carbon reinforced thermoplastic part I: limitations of the ASTM D3039/D3479 standard
Ives De Baere
Wim Van Paepegem
Marino Quaresimin
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2011
On the tension-tension fatigue behaviour of a carbon reinforced thermoplastic part II: evaluation of a dumbbell-shaped specimen
Ives De Baere
Wim Van Paepegem
Christian Hochard
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2011
Parameters affecting the pressure measurements on the surface of a rigid cylindrical body during water slamming impact
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
C1
Conferentie
2011
Performance of a sacrificial cladding structure made of empty recyclable metal beverage cans under large-scale air blast load
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Bruno Reymen
Eric Segers
Jean-Marie Ndambi
John Vantomme
Johan Van Ackeren
Jan Wastiels
Dimitrios Kakogiannis
et al.
P1
Conferentie
2011
Pressure measurement on the surface of a rigid cylindrical body during slamming wave impact
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
P1
Conferentie
2011
Pressure predictions during water entry of a 2D rigid cylinder using SPH method
Kameswara Vepa
Diederik Van Nuffel
Wim Van Paepegem
C1
Conferentie
2011
Regularized Newton-Raphson method for small strain calculation
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
C1
Conferentie
2011
Residual stress calculation in cold-rolled steel tubes with FEA validation of the strain evolution
Maarten De Strycker
Wim Van Paepegem
Dimitri Debruyne
Luc Schueremans
C1
Conferentie
2011
Scientific research on the dynamic and static properties of hybrid flax-carbon bicycle racing frames
Joachim Vanwalleghem
Wim Van Paepegem
Ives De Baere
Mia Loccufier
Joris Degrieck
C3
Conferentie
2011
Slamming wave impact of a composite buoy for wave energy applications: design and large-scale testing
Wim Van Paepegem
Chris Blommaert
Ives De Baere
Joris Degrieck
Griet De Backer
Julien De Rouck
Joris Degroote
Jan Vierendeels
Stijn Matthys
Luc Taerwe
A1
Artikel in een tijdschrift
in
POLYMER COMPOSITES
2011
Speckle noise reduction in full-field stress analysis by interferometric phase-stepping implementation of the photoelastic-coating method
Elena Stoykova
Wim Van Paepegem
T Liubenova
B Ivanov
Joris Degrieck
V Sainov
C1
Conferentie
2011
The effect of residual stresses on the strain evolution during welding of thin-walled tubes
Maarten De Strycker
Wim Van Paepegem
Luc Schueremans
Dimitri Debruyne
P1
Conferentie
2011
The use of DIC for high strain rate material testing
Jan Peirs
Patricia Verleysen
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2011
Validation of welding simulations using thermal strains measured with DIC
Maarten De Strycker
Pascal Lava
Wim Van Paepegem
Luc Schueremans
Dimitri Debruyne
P1
Conferentie
2011
2010
A study on the effect of the clearance on the contact stress and kinematics of polymeric composite journal bearings
Ali Rezaei
Wouter Ost
Wim Van Paepegem
Patrick De Baets
Joris Degrieck
C1
Conferentie
2010
Adaptive partitioning method in high resolution speckle imagery for sub-pixel digital image correlation
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
P1
Conferentie
2010
An experimental study on repetitive slamming wave impact on deformable composite structures
Diederik Van Nuffel
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2010
An investigation of the mechanical behavior of carbon epoxy cross ply cruciform specimens under biaxial loading
Andreas Makris
Carla Ramault
Danny Van Hemelrijck
Dimitrios Zarouchas
Ebrahim Lamkanfi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER COMPOSITES
2010
Assessment of pressure waves generated by explosive loading
Dimitrios Kakogiannis
Danny Van Hemelrijck
Jan Wastiels
Sivakumar Palanivelu
Wim Van Paepegem
John Vantomme
A Kotzakolios
V Kostopoulos
A1
Artikel in een tijdschrift
in
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES
2010
Combined experimental and numerical approach for identification of dynamic material model parameters
Jan Peirs
Patricia Verleysen
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2010
Comparative analysis of CZM for the simulation of delamination in advanced composites
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2010
Comparative study of the quasi-static energy absorption of small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
John Vantomme
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2010
Comparison of the crushing performance of hollow and foam-filled small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
John Vantomme
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2010
Composite material characterization through biaxial testing of cruciform specimens
Carla Ramault
Andreas Makris
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
P1
Conferentie
2010
Damage characterisation of a textile reinforced cement composite under low velocity impact loading
Johan Van Ackeren
J Blom
Dimitrios Kakogiannis
Jan Wastiels
Danny Van Hemelrijck
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
John Vantomme
C1
Conferentie
2010
Development of finite element strategies for shape optimization of biaxially loaded composite cruciform specimens and for ultrasound inspection of materials
Ebrahim Lamkanfi
Wim Van Paepegem
Danny Van Hemelrijck
Proefschrift
2010
Effect of flax fibre reinforcement on the riding comfort of composite racing bicycle frames
Amit Ghosh
Ives De Baere
Joachim Vanwalleghem
Joeri De Thaeye
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2010
Electrical resistance measurement for in-situ monitoring of fatigue of carbon fabric composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF FATIGUE
2010
Evaluation of digital image correlation techniques using realistic ground truth speckle images
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
MEASUREMENT SCIENCE & TECHNOLOGY
2010
Evaluation of local strain distribution in a satin weave composite using fibre Bragg gratings
Eli Voet
Subbareddy Daggumati
Geert Luyckx
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2010
Evaluation of local strain profiles in a satin weave composite: experimental vs meso-Fe modelling
Subbareddy Daggumati
Eli Voet
Wim Van Paepegem
Joris Degrieck
Tomas Praet
Benedict Verhegghe
J Xu
SV Lomov
I Verpoest
C1
Conferentie
2010
Experimental and numerical blast energy absorption study of composite tubes for sacrificial cladding structures
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Bruno Reymen
Jean-Marie Ndambi
John Vontomme
Dimitrios Kakaogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
C1
Conferentie
2010
Experimental and numerical study of impact on window glass fitted with safety window film
Stijn De Pauw
Joris Degrieck
Wim Van Paepegem
Proefschrift
2010
Experimental study and numerical simulation of the large-scale testing of polymeric composite journal bearings: two-dimensional modeling and validation
Ali Rezaei
Wouter Ost
Wim Van Paepegem
Joris Degrieck
Patrick De Baets
A1
Artikel in een tijdschrift
in
TRIBOLOGY LETTERS
2010
Experimental study on the axial crushing behaviour of pultruded composite tubes
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Johan Van Ackeren
Dimitrios Kakogiannis
Danny Van Hemelrijck
Jan Wastiels
John Vantomme
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2010
FE-modeling of damage of twill carbon/epoxy composite on meso-scale, materials characterization and experimental verification
Jian Xu
Stepan Lomov
Ignaas Verpoest
Subbareddy Daggumati
Wim Van Paepegem
Joris Degrieck
M Olave
P1
Conferentie
2010
Fatigue damage modelling with the phenomenological residual stiffness approach
Wim Van Paepegem
Hoofdstuk in een boek
in
Fatigue life prediction of composites and composite structures
2010
Improved Newton-Raphson digital image correlation method for full-field displacement and strain calculation
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
APPLIED OPTICS
2010
Influence of the internal yarn nesting (shifting) on the local structural response of a satin weave composite: an experimental and numerical overview
Subbareddy Daggumati
Eli Voet
Wim Van Paepegem
Joris Degrieck
Tomas Praet
Benedict Verhegghe
Jian Xu
Stepan V Lomov
Ignaas Verpoest
P1
Conferentie
2010
Investigation of the failure behaviour of fibre reinforced polymers under biaxial loading conditions
Andreas Makris
Danny Van Hemelrijck
Wim Van Paepegem
Proefschrift
2010
Local damage in a 5-harness satin weave composite under static tension, part I: experimental analysis
Subbareddy Daggumati
Ives De Baere
Wim Van Paepegem
Joris Degrieck
J Xu
SV Lomov
I Verpoest
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2010
Local damage in a 5-harness satin weave composite under static tension, part II: meso-FE modelling
Subbareddy Daggumati
Wim Van Paepegem
Joris Degrieck
J Xu
SV Lomov
i Verpoest
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2010
Measuring the thermal expansion coefficient of tubular steel specimens with digital image correlation techniques
M De Strycker
L Schueremans
Wim Van Paepegem
D Debruyne
A1
Artikel in een tijdschrift
in
OPTICS AND LASERS IN ENGINEERING
2010
Modelling the (damage) mechanics of textile composites with the aid of micro-tomography measurements
Wim Van Paepegem
Ives De Baere
Subbareddy Daggumati
Geert Luyckx
Manuel Dierick
Denis Van Loo
Veerle Cnudde
C3
Conferentie
2010
Monitoring quasi-static and cyclic fatigue damage in fibre-reinforced plastics by Poisson's ratio evolution
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF FATIGUE
2010
Numerical investigation of deformable composite structures under slamming loads
Kameswara Vepa
Wim Van Paepegem
Joris Degroote
Jan Vierendeels
C3
Conferentie
2010
On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2010
Parametric study of crushing parameters and failure patterns of pultruded composite tubes using cohesive elements and seam, part I: central delamination and triggering modelling
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
John Vantomme
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2010
Parametric study of crushing parameters and failure patterns of pultruded composite tubes using cohesive elements and seam: part II: multiple delaminations and initial geometric imperfections
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Johan Van Ackeren
Dimitrios Kakogiannis
Jan Wastiels
Danny Van Hemelrijck
John Vantomme
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2010
Partitioned simulation of the interaction between an elastic structure and free surface flow
Joris Degroote
Antonio Souto-Iglesias
Wim Van Paepegem
Sebastiaan Annerel
Peter Bruggeman
Jan Vierendeels
A1
Artikel in een tijdschrift
in
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
2010
Progressive crushing of pultruded tubes under quasistatic and blast loading
Dimitrios Kakogiannis
Danny Van Hemelrijck
Johan Van Ackeren
Jan Wastiels
Sivakumar Palanivelu
Wim Van Paepegem
Bruno Reymen
John Vantomme
C1
Conferentie
2010
Progressive fatigue damage modeling of textile composite on meso-scale with FE-method
Jian Xu
Stepan Lomov
Ignaas Verpoest
Subbareddy Daggumati
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2010
Quantifying the drilling effect during the application of incremental hole-drilling technique in laminate composites
Joao Nobre
JH Stiffel
Wim Van Paepegem
A Nau
AC Batista
MJ Marques
B Scholtes
P1
Conferentie
2010
Quasi-static and impact energy absorption assessment of different shapes of small-scale composite tubes
Wim Van Paepegem
Sivakumar Palanivelu
Joris Degrieck
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
C1
Conferentie
2010
Residual stresses due to the welding of cold-rolled steel tubes
Maarten De Strycker
Wim Van Paepegem
Luc Schueremans
Dimitri Debruyne
C3
Conferentie
2010
Resonance fatigue testing of test beams made of composite material
Jun Gu
Hugo Sol
Wim Van Paepegem
C1
Conferentie
2010
Shape optimisation of a biaxially loaded cruciform specimen
Andreas Makris
Thomas Vandenbergh
Carla Ramault
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2010
Slamming wave impact on a rigid cylindrical body : comparison of experimental research and numerical simulation
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Wim Van Paepegem
Jan Vierendeels
C1
Conferentie
2010
Speckle noise reduction in full-field stress analysis by interferometric phase-stepping implementation of the photoelastic-coating method
Elena Stoykova
Wim Van Paepegem
G Minchev
B Ivanov
Joris Degrieck
V Sainov
C3
Conferentie
2010
Strain distribution in cruciform specimens subjected to biaxial loading conditions, part 1: two-dimensional versus three-dimensional finite element model
Ebrahim Lamkanfi
Wim Van Paepegem
Joris Degrieck
Carla Ramault
Andreas Makris
Danny Van Hemelrijck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2010
Strain distribution in cruciform specimens subjected to biaxial loading conditions, part 2: influence of geometrical discontinuities
Ebrahim Lamkanfi
Wim Van Paepegem
Joris Degrieck
Carla Ramault
Andreas Makris
Danny Van Hemelrijck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2010
Strain rate effect on the mechanical behaviour of a textile reinforced cement composite
J Van Ackeren
J Blom
D Kakogiannis
J Wastiels
D Van Hemelrijck
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
J Vantomme
P1
Conferentie
2010
2009
A new meso-scale modelling of static and fatigue damage in woven composite materials with finite element method
J Xu
SV Lomov
Ignace Verpoest
Subbareddy Daggumati
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2009
Acitve noise control in three dimension enclosure using piezoceramics
Guohua Han
Joris Degrieck
Wim Van Paepegem
Xiaoxiong Jin
Yanfang Hou
C1
Conferentie
2009
An investigation of the mechanica behaviour of carbon epoxy cross ply cruciform specimens under biaxial loading
A Makris
C Ramault
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2009
Application of various strain measuring techniques on a biaxially loaded cruciform composite specimen
Carla Ramault
Andreas Makris
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
P1
Conferentie
2009
Biaxial failure envelopes for glass fibre reinforced composite laminates
Andreas Makris
Carla Ramault
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2009
Blast energy absorptio of recyclable beverage cans
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
John Vantomme
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
C1
Conferentie
2009
Blast energy absorption of recyclable beverage cans and composite tubes for sacrificial cladding structures
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
John Vantomme
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
C1
Conferentie
2009
Comparison of different setups for fatigue testing of thin composite laminates in bending
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF FATIGUE
2009
Composite floating 'point absorbers' for wave energy converters: survivability design, production method and large-scale testing
Chris Blommaert
Joris Degrieck
Wim Van Paepegem
Proefschrift
2009
Damage assessment of carbon-epoxy cross ply cruciform type specimens under biaxial loading conditions
Andreas Makris
Carla Ramault
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2009
Damage evolution on composite cruciform specimens under quasi-static biaxial loading
Andreas Makris
Carla Ramault
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2009
Design and production of cruciform composite specimens for in-plane biaxial tests
Carla Ramault
Andreas Makris
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2009
Design of composite material for cost effective large scale production of components for floating offshore structures
Chris Blommaert
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
PLASTICS RUBBER AND COMPOSITES
2009
Design of sacrificial cladding structures to protect civil engineering structures from blast load
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
John Vantomme
C3
Conferentie
2009
Development and validation of a FE model for oblique soccer ball bounce on artificial turf
Ali Rezaei
Rudy Verhelst
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2009
Development of an inverse method for material characterization using a biaxially loaded cruciform composite specimen
Carla Ramault
Andreas Makris
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2009
Effect of tab design on the strain distribution of a biaxially loaded cruciform composite specimen
Carla Ramault
Andreas Makris
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2009
Energy absorption of composite tubes :experimental testing and finite element modelling
Wim Van Paepegem
Sivakumar Palanivelu
Joris Degrieck
C3
Conferentie
2009
Evaluation of different advanced finite element concepts for detailed stress analysis of laminated composite structures
Khawaja Kamran Rah
Wim Van Paepegem
A. M. Habraken
R. A. de Sousa
R. A. F. Valente
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF MATERIAL FORMING
2009
Evaluation of different advanced finite element concepts for detailed stress analysis of laminated composite structures
Khawaja Kamran Rah
Wim Van Paepegem
AM Habraken
R de Sousa
R Valente
C1
Conferentie
2009
Experimental and numerical study of pultruded composite tubes under blast loading
Dimitrios Kakogiannis
Danny Van Hemelrijck
Jan Wastiels
Johan Van Ackeren
Sivakumar Palanivelu
Wim Van Paepegem
John Vantomme
Gerald Nurick
Kim Yuen
P1
Conferentie
2009
Experimental and numerical study of the energy absorption capacity of pultruded tubes under blast load
Dimitrios Kakogiannis
Danny Van Hemelrijck
Jan Wastiels
Johan Van Ackeren
Sivakumar Palanivelu
Wim Van Paepegem
John Vantomme
Gerald Nurick
Chung Kim Yuen
C1
Conferentie
2009
Experimental and numerical study of the large-scale testing of composite bearings
Ali Rezaei
Wouter Ost
Wim Van Paepegem
Joris Degrieck
Patrick De Baets
C1
Conferentie
2009
Experimental and numerical study of the large-scale testing of filament wound composite bearings
Ali Rezaei
Wouter Ost
Wim Van Paepegem
Joris Degrieck
Patrick De Baets
C1
Conferentie
2009
Experimental investigation of water impact on axisymmetric bodies
Griet De Backer
Marc Vantorre
Charlotte Beels
J De Pré
S Victor
Julien De Rouck
Chris Blommaert
Wim Van Paepegem
A1
Artikel in een tijdschrift
in
APPLIED OCEAN RESEARCH
2009
Fatigue and impact testing of textile reinforced thermoplastic composites for aerospace applications
Wim Van Paepegem
Ives De Baere
Joris Degrieck
C1
Conferentie
2009
Fatigue damage in structural textile composites: testing and modelling strategies
Wim Van Paepegem
Hoofdstuk in een boek
in
Fatigue failure of textile fibres
2009
Fatigue testing of fibre reinforced thermoplastics : different testing and instrumentation strategies
Wim Van Paepegem
Ives De Baere
Joris Degrieck
C1
Conferentie
2009
Full field stress analysis of window security films by phase-stepping photoelasticity
Elena Stoykova
Wim Van Paepegem
G Minchev
Joris Degrieck
V Sainov
P1
Conferentie
2009
Fusion bonding of carbon fabric reinforced polyphenylene sulphide by hot-tool welding
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2009
Generation of realistic ground truth images using radial basis functions for the evaluation of DIC algorithms
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
Pascal Lava
Dimitri Debruyne
P1
Conferentie
2009
Impact study of textile reinforced cementitious materials : test method and preliminary results
Johan Van Ackeren
J Blom
Dimitrios Kakogiannis
Jan Wastiels
D Van Hemelrijck
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
John Vantomme
P1
Conferentie
2009
Large scale slamming tests on composite buoys for wave energy applications
Chris Blommaert
Wim Van Paepegem
P Dhondt
Griet De Backer
Joris Degrieck
Julien De Rouck
Marc Vantorre
Joost Van Slycken
Ives De Baere
Hans De Backer
et al.
C1
Conferentie
2009
Meso-scale modeling in thermoplastic 5-harness satin weave composite
Subbareddy Daggumati
Ives De Baere
Wim Van Paepegem
Joris Degrieck
J Xu
SM Lomov
I Verpoest
C1
Conferentie
2009
Modelling the nonlinear shear stress-strain behavior of a carbon fabric reinforced polyphenylene sulphide from rail shear and [(+45°,-45°)]4s tensile test
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER COMPOSITES
2009
Normtesten op composiet laminaten
Wim Van Paepegem
Hoofdstuk in een boek
in
Werken met innovatieve materialen : koudhardende kunststoffen
2009
Novel pure-shear sheet specimen geometry for dynamic material characterisation
Jan Peirs
Patricia Verleysen
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2009
Numerical and experimental analysis of friction of large scale self lubricating radial bearings
Wim Van Paepegem
Ali Rezaei
Wouter Ost
Patrick De Baets
Laszlo Zidai
Gabor Kalacska
C1
Conferentie
2009
Numerical axial impact study of pultruded circular and square composite tubes
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
Kathleen De Wolf
John Vantomme
P1
Conferentie
2009
Numerical energy absorption study of composite tubes for axial impact loadings
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Dimitrios Kakogiannis
Johan Van Ackeren
Jan Wastiels
Danny Van Hemelrijck
John Vantomme
K De Wolf
C1
Conferentie
2009
Numerical energy absorption study of pultruded composite tubes
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
John Vantomme
C1
Conferentie
2009
Numerical scheme for the optimization of composite materials under a biaxial loading state
Ebrahim Lamkanfi
Wim Van Paepegem
Joris Degrieck
Andreas Makris
Carla Ramault
Danny Van Hemelrijck
C3
Conferentie
2009
Numerical simulations of progressive crushing of pultruded composite tubes under axial blast load
Dimitrios Kakogiannis
Danny Van Hemelrijck
Johan Van Ackeren
Jan Wastiels
Sivakumar Palanivelu
Wim Van Paepegem
John Vantomme
Gerald Nurick
Chung Kim Yuen
C1
Conferentie
2009
Numerical study of Rayleigh wave transmission through an acoustic barrier
Ebrahim Lamkanfi
Nico F Declercq
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
JOURNAL OF APPLIED PHYSICS
2009
On the design of end tabs for quasi-static and fatigue testing of fibre-reinforced composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER COMPOSITES
2009
On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions
Ives De Baere
Geert Luyckx
Eli Voet
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
OPTICS AND LASERS IN ENGINEERING
2009
On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic, part I: influence of the sensor
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2009
On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic, part II: analytical explanation
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2009
Optimization of a cruciform composite specimen under biaxial loading by means of an evolutionary algorithm
Ebrahim Lamkanfi
Wim Van Paepegem
Joris Degrieck
Andreas Makris
Carla Ramault
Danny Van Hemelrijck
C1
Conferentie
2009
Partitioned simulation of the impact of a deformable composite cylinder on a water surface
Joris Degroote
Chris Blommaert
Robby Haelterman
Wim Van Paepegem
Jan Vierendeels
C1
Conferentie
2009
Performance of fiber-reinforced piezoelectric sandwich structures
Guohua Han
Joris Degrieck
Wim Van Paepegem
Xiaoxiong Jin
Yanfang Hou
C1
Conferentie
2009
Progressive damage modelling of FRP cruciform type specimens under biaxial loading conditions
Andreas Makris
Carla Ramault
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2009
Projection moiré measurement of glass specimens retrofitted with safety film
Assen Shulev
Wim Van Paepegem
Sijn De Pauw
Elena Stoikova
Joris Degrieck
Ventseslav Sainov
P1
Conferentie
2009
Response of FBGs in microstructured and bow tie fibers embedded in laminated composite
Geert Luyckx
Eli Voet
Thomas Geernaert
Karima Chah
Tomasz Nasilowski
Wim De Waele
Wim Van Paepegem
Martin Becker
Hartmut Bartelt
Waclaw Urbanczyk
et al.
A1
Artikel in een tijdschrift
in
IEEE PHOTONICS TECHNOLOGY LETTERS
2009
Slamming wave impact of a composite buoy for wave energy applications : design and large-scale testing
Wim Van Paepegem
Chris Blommaert
Joris Degrieck
Griet De Backer
Julien De Rouck
Jan Vierendeels
Stijn Matthys
Luc Taerwe
C3
Conferentie
2009
Strain monitoring of FRP elements using an embedded fibre optic sensor
Geert Luyckx
Eli Voet
Wim De Waele
Wim Van Paepegem
Joris Degrieck
J Vlekken
P1
Conferentie
2009
Study of blast load on recyclable empty metal cans
Sivakumar Palanivelu
Wim Van Paepegem
Joris Degrieck
Kathleen De Wolf
John Vantomme
Dimitrios Kakogiannis
Johan Van Ackeren
Danny Van Hemelrijck
Jan Wastiels
P1
Conferentie
2009
Study of the deformation characteristics of window security film by digital image correlation techniques
Wim Van Paepegem
Assen A Shulev
Ilia R Roussev
Stijn De Pauw
Joris Degrieck
Ventseslav C Sainov
A1
Artikel in een tijdschrift
in
OPTICS AND LASERS IN ENGINEERING
2009
Validation of digital image correlation technique for impact loading applications
Sivakumar Palanivelu
Stijn De Pauw
Wim Van Paepegem
Joris Degrieck
Johan Van Ackeren
Dimitrios Kakogiannis
Jan Wastiels
Danny Van Hemelrijck
John Vantomme
P1
Conferentie
2009
Welding of cold-rolled steel tubes : sensitivity of FEA input parameters
Maarten De Strycker
D Debruyne
Wim Van Paepegem
L Schueremans
C1
Conferentie
2009
2008
A clamped three-point bending setup for fatigue of thin composite laminates
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2008
A modified three-rail shear test for fatigue of composite laminates
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2008
Biaxial fatigue testing using cruciform composite specimens
Andreas Makris
Carla Ramault
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2008
Biaxial testing of fibre-reinforced composite laminates
Danny Van Hemelrijck
Andreas Makris
Carla Ramault
Ebrahim Lamkanfi
Wim Van Paepegem
D Lecompte
A1
Artikel in een tijdschrift
in
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
2008
Blast loading response of typical coca-cola cans
D KAKOGIANNIS
K DE WOLF
Sivakumar Palanivelu
D VAN HEMELRIJCK
J VANTOMME
Wim Van Paepegem
C1
Conferentie
2008
Comparison of the modified three-rail shear test and the [(+45 degrees,-45 degrees)](ns) tensile test for pure shear fatigue loading of carbon fabric thermoplastics
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
2008
Conversion of a Scholte-Stoneley wave at the extremity of a fluid loaded plate: comparison between finite element method, radiation mode theory and experiments
Ebrahim Lamkanfi
NF Declercq
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2008
DESIGN OF COMPOSITE MATERIAL FOR COST EFFECTIVE LARGE SCALE PRODUCTION OF COMPONENTS FOR FLOATING OFFSHORE STRUCTURES
Chris Blommaert
Joris Degrieck
Wim Van Paepegem
C1
Conferentie
2008
Design of a modified three-rail shear test for shear fatigue of composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2008
Design of mechanical clamps with extra long wedge grips for static and fatigue testing of composite materials in tension and compression
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
EXPERIMENTAL TECHNIQUES
2008
Effect of bending radius on plastic deformation in a combined cut-bent tube connection
Maarten De Strycker
Koen Vanden Hautte
Dimitri Debruyne
Wim Van Paepegem
C1
Conferentie
2008
Electrical resistance measurement on carbon fiber-reinforced thermoplastics with rivets as electrodes
Ives De Baere
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2008
Experimental and numerical study of different setups for conducting and monitoring fatigue experiments of fibre-reinforced thermoplastics
Ives De Baere
Wim Van Paepegem
Joris Degrieck
Proefschrift
2008
Experimental and numerical study of the energy absorption capacity of pultruded composite tubes
Dimitrios Kakogiannis
Danny Van Hemelrijck
Jan Wastiels
Sivakumar Palanivelu
Wim Van Paepegem
Kathleen De Wolf
John Vantomme
C1
Conferentie
2008
Experimental and numerical study on axial crushing behaviour of pultruded composite tubes
Sivakumar Palanivelu
Rudy Verhelst
Wim Van Paepegem
Joris Degrieck
Dimitrios Kakogiannis
Danny Van Hemelrijck
Jan Wastiels
Kathleen De Wolf
John Vantomme
C1
Conferentie
2008
Fatigue testing of carbon fabric thermoplastics: different testing and instrumentation strategies.
Ives De Baere
Wim Van Paepegem
Eli Voet
Joris Degrieck
C1
Conferentie
2008
Finite element simulation of the linear and nonlinear interaction of progressive acoustic waves with a standing acoustic wave field
Ebrahim Lamkanfi
NF Declercq
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2008
Finite element study of e near edge Lamb wave excitation and mode conversion in plates
Ebrahim Lamkanfi
NF Declercq
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2008
Finite element study on the traveling of Leaky Rayleigh waves around the extremity of a thick fluid-loaded solid plate.
Ebrahim Lamkanfi
Nico Declercq
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2008
Fracture matching of broken utility knives using 3D imaging
Patrick De Smet
Wim Van Paepegem
Joris Degrieck
J De Kinder
C3
Conferentie
2008
Geometrical influence on the strain distribution in biaxial composite specimens
Ebrahim Lamkanfi
Wim Van Paepegem
Joris Degrieck
Andreas Makris
Carla Ramault
Danny Van Hemelrijck
C1
Conferentie
2008
Gradient-based optical flow for sub-pixel registration of speckle image sequences using a spatial/temporal postprocessing technique
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
P1
Conferentie
2008
Monitoring of a curved beam test structure using Bragg sensors
Geert Luyckx
Joris Degrieck
Ives De Baere
Wim De Waele
Wim Van Paepegem
T Verbeke
P1
Conferentie
2008
Non-destructive evaluation of composite structures using an innovative Bragg sensor
Geert Luyckx
Joris Degrieck
Wim De Waele
Wim Van Paepegem
J Vlekken
T Verbeke
P1
Conferentie
2008
Numerical evidence of the tunneling of Rayleigh waves beneath a reflective sound barrier by use of the finite element method
Ebrahim Lamkanfi
NF Declercq
Wim Van Paepegem
Joris Degrieck
C3
Conferentie
2008
On the feasibility of a three-point bending setup for the validation of (fatigue) damage models for thin composite laminates
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER COMPOSITES
2008
Optical flow processing for sub-pixel registration of speckle image sequences
Corneliu Cofaru
Wilfried Philips
Wim Van Paepegem
P1
Conferentie
2008
Projection moire measurement of glass specimens retrofitted with safety film
Assen Shulev
Wim Van Paepegem
Elena Stoykova
Stijn De Pauw
Joris Degrieck
Ventseslav Sainov
P1
Conferentie
2008
Real-time measurement of the deformation of thermoplastic composite plates under bird strike impact
Wim Van Paepegem
Assen Shulev
Joris Degrieck
Ventseslav Sainov
C1
Conferentie
2008
Research directions in the fatigue testing of polymer composites
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Geert Luyckx
Joris Degrieck
Hoofdstuk in een boek
in
Composite Materials Research Progress
2008
Research on Acoustic Environmental Correction Based on Measurement Uncertainty Theory with Application to Internal Combustion Engine
Guohua Han
Joris Degrieck
Wim Van Paepegem
C1
Conferentie
2008
Strain distribution in a biaxially loaded cruciform composite specimen
Carla Ramault
Andreas Makris
Danny Van Hemelrijck
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2008
Study of mechanical characteristics of window security films by phase-stepping photoelasticity
Elena Stoykova
Wim Van Paepegem
Stijn De Pauw
Joris Degrieck
Ventseslav Sainov
P1
Conferentie
2008
The use of optical fibers for fatigue testing of fiber-reinforced thermoplastics
Ives De Baere
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
Eli Voet
J Vlekken
P1
Conferentie
2008
Use of projection moiré for measuring the instantaneous out-of-plane deflections of composite plates subject to bird strike
Wim Van Paepegem
Assen Shulev
Alexander Moentjens
Jana Harizanova
Joris Degrieck
Ventseslav Sainov
A1
Artikel in een tijdschrift
in
OPTICS AND LASERS IN ENGINEERING
2008
Use of the finite element method in the investigation of diffraction effects at the extremity of solid plates for Rayleigh and Scholte-Stoneley waves
Ebrahim Lamkanfi
NF Declercq
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2008
2007
A relation between laboratory and full-scale testing of polyester/polyester composites under static and dynamic load
Pieter Samyn
Jan Quintelier
Wim Van Paepegem
Wim De Waele
P1
Conferentie
2007
A review of biaxial test methods for composites
A MAKRIS
A SMITS
D VAN HEMELRIJCK
A CLARKE
C WILLIAMSON
M GOWER
R SHAW
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2007
A thin foil optical strain gage based on silicon-on-insulator microresonators - art. no. 661914
Dirk Taillaert
Wim Van Paepegem
J VLEKKEN
Roel Baets
P1
Conferentie
2007
Analysis of a curved composite test specimen with Fibre Bragg gratings
Geert Luyckx
Ives De Baere
Wim De Waele
Wim Van Paepegem
J Vlekken
T Verbeke
C1
Conferentie
2007
Application of ultrasonic phased array for nondestructive detection of damage in biaxial cruciform
Ebrahim Lamkanfi
A SMITS
Wim Van Paepegem
D VAN HEMELRIJCK
C1
Conferentie
2007
Biaxial testing of fibre reinforced composites
D VAN HEMELRIJCK
A MAKRIS
C RAMAULT
Ebrahim Lamkanfi
Wim Van Paepegem
C1
Conferentie
2007
Blast loading response of typical steel cans
D KAKOGIANNIS
K DE WOLF
Sivakumar Palanivelu
D VAN HEMELRIJCK
J VANTOMME
Wim Van Paepegem
C1
Conferentie
2007
Characterization of composites for use in the ball-joints of the Maeslant storm surge barrier
Wim Van Paepegem
Joris Degrieck
Pieter Samyn
Patrick De Baets
L VAN SCHEPDAEL
JS LEENDERTZ
A1
Artikel in een tijdschrift
in
POLYMER COMPOSITES
2007
Comparison of different identification techniques for measurement of quasi-zero Poisson's ratio of fabric-reinforced laminates
Ives De Baere
Wim Van Paepegem
Joris Degrieck
H SOL
D VAN HEMELRIJCK
A PETRELI
A1
Artikel in een tijdschrift
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2007
Comparison of different set-ups for fatigue testing of thin composite laminates in bending
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2007
Electrical resistance measurement for in-situ monitoring of fatigue of carbon fabric composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2007
Experimental evaluation of fracture matching methods based on 3D imaging techniques
P DE SMET
J DE KINDER
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2007
Fast characterization of carbon/epoxy rings for use in the ball-joints of the Maeslant storm surge barrier
Wim Van Paepegem
L VAN SCHEPDAEL
Joris Degrieck
Pieter Samyn
Patrick De Baets
E SUISTER
JS LEENDERTZ
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2007
Feasibility study of an embedded Multi-Axial fibre bragg grating sensor
Geert Luyckx
Wim De Waele
Joris Degrieck
Wim Van Paepegem
J Vlekken
T Verbeke
P1
Conferentie
2007
Finite element analysis of transmission of leaky Rayleigh waves at the extremity of a fluid-loaded thick plate
Ebrahim Lamkanfi
Nico Declercq
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
JOURNAL OF APPLIED PHYSICS
2007
Full-scale analysis of deformation and stress distribution for constrained composite bearing elements under compressive yielding conditions
Pieter Samyn
L VAN SCHEPDAEL
JS LEENDERTZ
A GERBER
Wim Van Paepegem
Joris Degrieck
Patrick De Baets
A1
Artikel in een tijdschrift
in
MATERIALS & DESIGN
2007
Global analysis and constructional aspects in the redesign of bearing elements for a movable storm surge barrier
Pieter Samyn
Wim Van Paepegem
JS LEENDERTZ
E SUISTER
L VAN SCHEPDAEL
Joris Degrieck
Patrick De Baets
A1
Artikel in een tijdschrift
in
ENGINEERING STRUCTURES
2007
Inverse method for parameter determination of biaxially loaded cruciform composite specimens
C RAMAULT
A MAKRIS
A SMITS
D LECOMPTE
D VAN HEMELRIJCK
H SOL
Wim Van Paepegem
C1
Conferentie
2007
Laser cutting of tubes: possibilities in lightweight structures
M DE STRYCKER
K VANDEN HAUTTE
D DEBRUYNE
Wim Van Paepegem
C1
Conferentie
2007
Leaky Rayleigh waves propagating around the corner of a thick solid plate
Ebrahim Lamkanfi
Nico Declercq
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2007
Monitoring fatigue damage in fibre-reinforced plastics through the Poisson's ratio degradation
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Joris Degrieck
C1
Conferentie
2007
Numerical modelling of fatigue in textile polymer composites
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Geert Luyckx
Joris Degrieck
Hoofdstuk in een boek
in
Computational & experimental analysis of damaged materials
2007
On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions
Ives De Baere
Eli Voet
Wim Van Paepegem
J Vlekken
Veerle Cnudde
Bert Masschaele
Joris Degrieck
C1
Conferentie
2007
Poisson's ratio as a sensitive indicator of (fatigue) damage in fibre-reinforced plastics
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Joris Degrieck
A1
Artikel in een tijdschrift
in
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
2007
Projection moire measurement of the deflection of composite plates subject to bird strike impact - art. no. 66162Z
A SHULEV
Wim Van Paepegem
J HARIZANOVA
Alexander Moentjens
Joris Degrieck
V SAINOV
P1
Conferentie
2007
Short-beam-shear testing of composite rings with variable cross section as representative for full-scale delamination
Pieter Samyn
L VAN SCHEPDAEL
JS LEENDERTZ
Wim Van Paepegem
Patrick De Baets
Joris Degrieck
A1
Artikel in een tijdschrift
in
JOURNAL OF TESTING AND EVALUATION
2007
Simulating the plastic bending of innovative tube connections.
M DE STRYCKER
K VANDEN HAUTTE
D DEBRUYNE
Wim Van Paepegem
C1
Conferentie
2007
Strain monitoring in thermoplastic composites with optical fiber sensors: embedding process, visualization with micro-tomography, and fatigue results
Ives De Baere
Eli Voet
Wim Van Paepegem
J Vlekken
Veerle Cnudde
Bert Masschaele
Joris Degrieck
A1
Artikel in een tijdschrift
in
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
2007
Study of the deformation characteristics of window security film with optical techniques
Wim Van Paepegem
Stijn De Pauw
Assen A Shulev
Ilia R Roussev
Joris Degrieck
Ventseslav C Sainov
C3
Conferentie
2007
The use of rivets for electrical resistance measurement on carbon fibre-reinforced thermoplastics
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
SMART MATERIALS & STRUCTURES
2007
Three-dimensional strain and temperature monitoring of composite laminates
Geert Luyckx
Wim De Waele
Joris Degrieck
Wim Van Paepegem
J VLEKKEN
S VANDAMME
K CHAH
A1
Artikel in een tijdschrift
in
INSIGHT
2007
Towards the characterization of biaxial material performance
Danny Van Hemelrijck
Andreas Makris
Carla Ramault
Ebrahim Lamkanfi
Wim Van Paepegem
C3
Conferentie
2007
2006
Characterization of composites for the Maeslant storm surge barrier
Joris Degrieck
Wim Van Paepegem
L VAN SCHEPDAEL
Pieter Samyn
Patrick De Baets
E SUISTER
H LEENDERTZ
C1
Conferentie
2006
Deformation of reinforced polymer bearing elements on full-scale compressive strength and creep tests under yielding conditions
Pieter Samyn
L VAN SCHEPDAEL
JS LEENDERTZ
Wim Van Paepegem
Patrick De Baets
Joris Degrieck
A1
Artikel in een tijdschrift
in
POLYMER TESTING
2006
Effect of friction on the hysteresis loops from three-point bending fatigue tests of fibre-reinforced composites
Wim Van Paepegem
K DE GEYTER
P VANHOOYMISSEN
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2006
Experimental Study of the Friction and Wear Behaviour of a Polymer Disc / Primer Coating Combination Used in Ball-Joints by Means of Large-Scale Testing
Pieter Samyn
Patrick De Baets
Wim Van Paepegem
Joris Degrieck
L VAN SCHEPDAEL
A GERBER
J LEENDERTZ
A2
Artikel in een tijdschrift
in
Tribotest
2006
Experimental charaterisation and numerical modelling of impact damage in fibre-reinforced composites
Filip Van den Abeele
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2006
Fatigue detection of fibres reinforced composite materials by fringes projection and speckle shear interferometry
V SAINOV
J HARIZANOVA
S OSSIKOVSKA
Wim Van Paepegem
Joris Degrieck
Pierre Boone
P1
Conferentie
2006
Fiber optic sensing system for discriminating multi-axial strain components in composite elements
Geert Luyckx
Wim De Waele
Joris Degrieck
Wim Van Paepegem
C1
Conferentie
2006
Fracture assessment of carbon fibre/epoxy reinforcing rings through a combination of full-scale testing, small-scale testing and stress modeling
Pieter Samyn
L VAN SCHEPDAEL
Wim Van Paepegem
JS LEENDERTZ
E SUISTER
Patrick De Baets
Joris Degrieck
A1
Artikel in een tijdschrift
in
APPLIED COMPOSITE MATERIALS
2006
Impact damage model for fibre-reinforced composite materials
Filip Van den Abeele
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2006
Impact damage models for steel fibre reinforced composite materials
Filip Van den Abeele
Joris Degrieck
Wim Van Paepegem
Proefschrift
2006
Large-scale evaluation of constrained bearing elements made of thermosetting polyester resin and polyester fabric reinforcement
Pieter Samyn
Wim Van Paepegem
JS LEENDERTZ
A GERBER
L VAN SCHEPDAEL
Joris Degrieck
Patrick De Baets
A1
Artikel in een tijdschrift
in
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
2006
Large-scale friction and wear tests on a hybrid UHMWPE-pad/primer coating combination used as bearing element in an extremely high-loaded ball-joint
Pieter Samyn
L VAN SCHEPDAEL
JS LEENDERTZ
A GERBER
Wim Van Paepegem
Patrick De Baets
Joris Degrieck
A1
Artikel in een tijdschrift
in
TRIBOLOGY INTERNATIONAL
2006
Measurement of multi-axial stress/strain in composite elements with Bragg sensors
Geert Luyckx
Wim De Waele
Wim Van Paepegem
Joris Degrieck
L SOETE
J VLEKKEN
K CHAH
P1
Conferentie
2006
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2006
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part I: Experimental results
Wim Van Paepegem
Ives De Baere
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2006
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part II: Model development and finite element simulations
Wim Van Paepegem
Ives De Baere
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2006
Monitoring of fatigue, impact and wear in Cetex TPC
Joris Degrieck
Wim Van Paepegem
Veerle Cnudde
Ives De Baere
Patrick De Baets
Nico Declercq
Geert Luyckx
Bert Masschaele
Alexander Moentjens
Jan Quintelier
et al.
C1
Conferentie
2006
Multi-axial fiber Bragg sensors for monitoring purposes
Geert Luyckx
Joris Degrieck
Wim De Waele
Wim Van Paepegem
J VLEKKEN
K CHAH
C1
Conferentie
2006
Optimization of digital speckle photography for study of the tear resistance of window security film
A SHULEV
Wim Van Paepegem
I ROUSSEV
Stijn De Pauw
V SAINOV
C1
Conferentie
2006
Reliable small-scale qualification test for carbon/epoxy rings in the maeslant storm surge barrier
Wim Van Paepegem
L VAN SCHEPDAEL
Pieter Samyn
J LEENDERTZ
Patrick De Baets
Joris Degrieck
C1
Conferentie
2006
Reliable small-scale qualification tests for carbon/epoxy rings in the Maeslant storm surge barrier
Wim Van Paepegem
L VAN SCHEPDAEL
Pieter Samyn
H LEENDERTZ
Patrick De Baets
Joris Degrieck
C1
Conferentie
2006
Testing of fibers reinforced composite vessel by fringes projection and speckle shear interferometry - art. no. 625222
V SAINOV
J HARIZANOVA
S OSSIKOVSKA
Wim Van Paepegem
Joris Degrieck
Pierre Boone
P1
Conferentie
2006
Wear behavior of carbon fiber-reinforced poly(phenylene sulfide)
Jan Quintelier
Pieter Samyn
Patrick De Baets
T TUZOLANA
Wim Van Paepegem
Filip Van den Abeele
Jan Vermeulen
A1
Artikel in een tijdschrift
in
POLYMER COMPOSITES
2006
Änderung der Gelenklagerkonstruktion des Sturmflutsperrwerks bei Rotterdam
H Leendertz
L Van Schepdael
Wim Van Paepegem
Pieter Samyn
Patrick De Baets
Joris Degrieck
A2
Artikel in een tijdschrift
in
STAHLBAU
2006
2005
Integrated design of highly loaded sliding surfaces of a huge ball-joint
Pieter Samyn
Wim Van Paepegem
Patrick De Baets
Joris Degrieck
J LEENDERTZ
E SUISTER
L VAN SCHEPDAEL
C1
Conferentie
2005
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2005
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2005
Nonlinear correction to the bending stiffness of a damaged composite beam
Wim Van Paepegem
Robert Dechaene
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2005
Numerical modelling of impact damage in composite materials
Filip Van den Abeele
R DECHAENE
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2005
Numerical modelling of impact damage in composite materials
Filip Van den Abeele
R DECHAENE
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2005
Simulating damage and permanent strain in composites under in-plane fatigue loading
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPUTERS & STRUCTURES
2005
Wear of steel against carbon fibre reinforced PPS
Jan Quintelier
Pieter Samyn
Patrick De Baets
Wim Van Paepegem
C1
Conferentie
2005
Wear of steel against carbon fibre reinforced PPS
Jan Quintelier
Patrick De Baets
Pieter Samyn
Wim Van Paepegem
A2
Artikel in een tijdschrift
in
TRIBOLOGY IN INDUSTRY
2005
2004
Damage Model for Fibre Reinforced Composites
Filip Van den Abeele
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2004
Design of a Carbon/epoxy reinforcing ring reducing creep of UHMWPE in high-loaded sliding contacts
Pieter Samyn
Patrick De Baets
Wim Van Paepegem
L VAN SCHEPDAEL
E SUISTER
J LEENDERTZ
C1
Conferentie
2004
Fatigue detection of fibre-reinforced composite materials by fringe projection interferometry
V SAINOV
J HARIZANOVA
S OSSIKOVSKA
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2004
Simulating damage and permanent strain in fibre-reinforced composites under in-plane fatigue loading
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2004
Simulating in-plane fatigue damage in woven glass fibre-reinforced composites subject to fully reversed cyclic loading
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
2004
Vermoeiing van composietmaterialen
Wim Van Paepegem
Joris Degrieck
A4
Artikel in een tijdschrift
in
Agoria e-News
2004
Vermoeiing van composietmaterialen: van experiment tot berekening
Wim Van Paepegem
Joris Degrieck
A4
Artikel in een tijdschrift
in
Techniline WTCM
2004
2003
Calculation of damage-dependent directional failure indices from the Tsai-Wu static failure criterion
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2003
Impact Behaviour of a New Hybrid Composite Material
Filip Van den Abeele
Joris Degrieck
Wim Van Paepegem
C1
Conferentie
2003
Modelling damage and permanent strain in fibre-reinforced composites under in-plane fatigue loading
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2003
Simulating damage and permanent strain in composites under in-plane fatigue loading
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2003
2002
A new coupled approach of residual stiffness and strength for fatigue of fibre-reinforced composites.
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
INTERNATIONAL JOURNAL OF FATIGUE
2002
Coupled residual stiffness and strength model for fatigue of fibre-reinforced composite materials.
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITES SCIENCE AND TECHNOLOGY
2002
Development and finite element implementation of a damage model for fatigue of fibre-reinforced polymers.
Wim Van Paepegem
Boek
2002
Effects of load sequence and block loading on the fatigue response of fiber reinforced composites.
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
2002
Modelling single-sided and fully-reversed bending fatigue of fibre-reinforced composites
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2002
Tensile and compressive damage coupling for fully-reversed bending fatigue of fibre-reinforced composites
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES
2002
2001
Application of digital phase-shift shadow Moire to micro deformation measurements of curved surfaces.
Joris Degrieck
Wim Van Paepegem
Pierre Boone
A1
Artikel in een tijdschrift
in
OPTICS AND LASERS IN ENGINEERING
2001
Experimental set-up for and numerical modelling of bending fatigue experiments on plain woven glass/epoxy composites.
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITE STRUCTURES
2001
Fatigue damage modeling of fibre-reinforced composite materials: review.
Joris Degrieck
Wim Van Paepegem
A2
Artikel in een tijdschrift
in
Appl. Mech. Rev.
2001
Fatigue degradation modelling of plain woven glass/epoxy composites.
Wim Van Paepegem
Joris Degrieck
A1
Artikel in een tijdschrift
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2001
Finite element approach for modelling fatigue damage in fibre-reinforced composite materials.
Wim Van Paepegem
Joris Degrieck
Patrick De Baets
A1
Artikel in een tijdschrift
in
COMPOSITES PART B-ENGINEERING
2001
Modelling strategies for fatigue damage behaviour of fibre-reinforced polymer composites.
Wim Van Paepegem
Joris Degrieck
A2
Artikel in een tijdschrift
in
EUROPEAN JOURNAL OF MECHANICAL AND ENVIRONMENTAL ENGINEERING
2001
New coupled approach of residual stiffness and strength for fatigue of fibre-reinforced composites.
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2001
2000
Experimental and numerical investigation of fatigue of fibre-reinforced composite materials.
Wim Van Paepegem
Joris Degrieck
A2
Artikel in een tijdschrift
in
Journal of the engineering integrity society
2000
Experimental setup for the bending fatigue of fibre-reinforced composite materials
Wim Van Paepegem
Joris Degrieck
C1
Conferentie
2000
Experimental setup for the bending fatigue of fibre-reinforced composite materials
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2000
Numerical modelling of fatigue degradation of fibre-reinforced composite materials
Wim Van Paepegem
Joris Degrieck
P1
Conferentie
2000
Finite element implementation of fatigue degradation models for fiber-reinforced composites. Composites in Manufacturing 17, nr.3, 2001, 1-7.
Wim Van Paepegem
Joris Degrieck
A2
Artikel in een tijdschrift
Numerical Modelling of Fatigue Degradation of Fibre-Reinforced Composite Materials. Computational Techniques for Materials, Composites and Composite Structures, 319-326. [ISBN 0-948749-69-5].
Wim Van Paepegem
Joris Degrieck
C1
Conferentie