Manage settings
MENU
About this site
In het Nederlands
Home
Researchers
Projects
Organisations
Publications
Infrastructure
Contact
Research Explorer
Your browser does not support JavaScript or JavaScript is not enabled. Without JavaScript some functions of this webapplication may be disabled or cause error messages. To enable JavaScript, please consult the manual of your browser or contact your system administrator.
Researcher
Stijn Hertelé
Profile
Projects
Publications
Activities
Awards & Distinctions
266
Results
2025
Scratch abrasion modelling using continuum damage mechanics with experimental calibration at low stress triaxiality
Dhanraj Rajaraman
Dieter Fauconnier
Stijn Hertelé
Dissertation
2025
2024
Damage evolution of a hydrogen charged grade X56 pipeline steel evaluated using X-ray micro-CT
Robin Depraetere
Wim De Waele
Margo Cauwels
Tom Depover
Kim Verbeken
Stijn Hertelé
C1
Conference
2024
Hydrogen assisted toughness reduction in a pipeline steel assessed by single edge notched tension tests
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Kim Verbeken
Tom Depover
C3
Conference
2024
Hydrogen-assisted degradation of an X70 pipeline steel evaluated by single edge notched tension testing
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Tom Depover
Kim Verbeken
C1
Conference
2024
Hydrogen-assisted toughness reduction of a 42CrMo4 steel assessed by single edge notched tension tests
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Kim Verbeken
Tom Depover
A1
Journal Article
in
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
2024
Microstructural and micromechanical assessment of hydrogen embrittlement in pipeline steels
Margo Cauwels
Kim Verbeken
Tom Depover
Stijn Hertelé
Dissertation
2024
The effect of hydrogen and notch orientation in SENT specimens on the fracture toughness of an API 5L X70 pipeline steel
Robin Depraetere
Wim De Waele
Margo Cauwels
Tom Depover
Kim Verbeken
Stijn Hertelé
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2024
The role of hydrogen on the fracture micro-mechanism of different pipeline steels and their welds
Margo Cauwels
Jubica Jubica
Lisa Claeys
Robin Depraetere
Laura De Pue
Stijn Hertelé
Wim De Waele
Kim Verbeken
Tom Depover
C3
Conference
2024
2023
A novel calibration procedure of Johnson-Cook damage model parameters for simulation of scratch abrasion
Dhanraj Rajaraman
Stijn Hertelé
Dieter Fauconnier
A1
Journal Article
in
WEAR
2023
Confirming debonding of non-metallic inclusions as an important factor in damage initiation in bearing steel
Ksenija Nikolić
Jelle De Wispelaere
Gopalakrishnan Ravi
Stijn Hertelé
Tom Depover
Kim Verbeken
Roumen Petrov
A1
Journal Article
in
METALS
2023
Effect of stress triaxiality on the hydrogen embrittlement micromechanisms in a pipeline steel evaluated by fractographic analysis
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Kim Verbeken
Tom Depover
A1
Journal Article
in
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
2023
Effects of volumetric weld imperfections on the characterization of ductile tearing resistance and its validity
Vitor Soares Rabelo Adriano
Stijn Hertelé
Wim De Waele
Dissertation
2023
Experimental-numerical characterisation of hydrogen embrittlement mechanics in high-strength low alloy steel
Robin Depraetere
Stijn Hertelé
Wim De Waele
Kim Verbeken
Dissertation
2023
Fractographic study for screening the hydrogen compatibility of X70 pipeline steels and welds
Lisa Claeys
Jubica Jubica
Laura De Pue
Stijn Hertelé
Wim De Waele
Tom Depover
Kim Verbeken
C3
Conference
2023
Fractographic study of quasi-static tensile tested, electrochemically hydrogen charged X70 pipeline steels
Jubica Jubica
Laura De Pue
Lisa Claeys
Wim De Waele
Stijn Hertelé
Tom Depover
Kim Verbeken
C1
Conference
2023
Hydrogen embrittlement of an X70 pipeline steel assessed by slow strain rate tensile tests
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Kim Verbeken
Tom Depover
C3
Conference
2023
Hydrogen-assisted degradation of an X70 pipeline steel evaluated by single edge notched tension testing
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Tom Depover
Kim Verbeken
C3
Conference
2023
Influence of stress triaxiality on hydrogen assisted ductile damage in an X70 pipeline steel
Robin Depraetere
Wim De Waele
Margo Cauwels
Tom Depover
Kim Verbeken
Matthieu Boone
Stijn Hertelé
A1
Journal Article
in
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
2023
Investigation of the dynamic strain aging effect in austenitic weld metals by 3D-DIC
Amke Lescur
Erich Stergar
Jun Lim
Stijn Hertelé
Roumen Petrov
A1
Journal Article
in
METALS
2023
Microstructural and fractographic investigation of hydrogen embrittlement sensitivity of X70 pipeline steels
Jubica Jubica
Lisa Claeys
Laura De Pue
Stijn Hertelé
Wim De Waele
Kim Verbeken
Tom Depover
C3
Conference
2023
Modeling of hydrogen-charged notched tensile tests of an X70 pipeline steel with a hydrogen-informed Gurson model
Robin Depraetere
Wim De Waele
Margo Cauwels
Tom Depover
Kim Verbeken
Stijn Hertelé
A1
Journal Article
in
MATERIALS
2023
Numerical modelling of rolling contact fatigue damage initiation from non-metallic inclusions in bearing steel
Gopalakrishnan Ravi
Wim De Waele
Ksenija Nikolić
Roumen Petrov
Stijn Hertelé
A1
Journal Article
in
TRIBOLOGY INTERNATIONAL
2023
The influence of liquid lead-bismuth environment on mechanical properties and corrosion resistance of austenitic stainless steel welds
Amke Lescur
Roumen Petrov
Stijn Hertelé
Dissertation
2023
2022
A novel calibration procedure of Johnson-Cook damage model parameters for simulation of scratch abrasion
Dhanraj Rajaraman
Naveenkumar Rajendhran
Junhe Lian
Stijn Hertelé
Dieter Fauconnier
C3
Conference
2022
A study on effects of flaw shape idealization on the interaction of co-planar surface flaws subjected to tension load
Kaveh Samadian
Stijn Hertelé
Wim De Waele
A1
Journal Article
in
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
2022
Calibration of damage model parameters for the simulation of scratch abrasion
Dhanraj Rajaraman
Stijn Hertelé
Dieter Fauconnier
C3
Conference
2022
Calibration of damage model parameters for the simulation of scratch abrasion
Dhanraj Rajaraman
Stijn Hertelé
Dieter Fauconnier
C3
Conference
2022
Characterization of hydrogen-assisted degradation of a vintage and a modern pipeline steel
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Tom Depover
Kim Verbeken
C1
Conference
2022
Characterization of hydrogen-assisted degradation of a vintage and a modern pipeline steel
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Tom Depover
Kim Verbeken
C3
Conference
2022
Ductile damage modelling of hydrogen assisted degradation in tensile and fracture toughness tests of X70 pipeline steel
Robin Depraetere
Wim De Waele
Stijn Hertelé
C1
Conference
2022
Effect of hydrogen charging on Charpy impact toughness of an X70 pipeline steel
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Kim Verbeken
Tom Depover
P1
Conference
2022
Effect of hydrogen charging on Charpy impact toughness of two pipeline steels
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Tom Depover
Kim Verbeken
C3
Conference
2022
Effects of fixture configurations and weld strength mismatch on J-integral calculation procedure for SE(B) specimens
Primoz Stefane
Stijn Hertelé
Sameera Naib
Wim De Waele
Nenad Gubeljak
A1
Journal Article
in
MATERIALS
2022
Gaseous hydrogen transport in existing pipelines : a review of factors affecting material degradation
Aurélie Laureys
Robin Depraetere
Margo Cauwels
Tom Depover
Stijn Hertelé
Kim Verbeken
C1
Conference
2022
Hydrogen embrittlement in pipeline steels and welds
Laura De Pue
Robin Depraetere
Margo Cauwels
Lisa Claeys
Tom Depover
Kim Verbeken
Wim De Waele
Stijn Hertelé
C3
Conference
2022
Influence of electrochemical hydrogenation parameters on microstructures prone to hydrogen-induced cracking
Margo Cauwels
Robin Depraetere
Wim De Waele
Stijn Hertelé
Tom Depover
Kim Verbeken
A1
Journal Article
in
JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING
2022
Influence of internal volumetric imperfections on the tearing resistance curve of welded single edge notched tension (SENT) specimens
Vitor Soares Rabelo Adriano
Wim De Waele
Eleine Cardon
Matthieu Boone
Stijn Hertelé
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2022
Interaction between surface breaking and embedded circumferential flaws in tension loaded (pressurized) steel pipes
Kaveh Samadian
Vitor Soares Rabelo Adriano
Otto Jan Huising
Wim De Waele
Stijn Hertelé
A1
Journal Article
in
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
2022
Numerical modelling of the dynamic plasticity and fracture behaviour of X70 pipeline steel
Sarath Chandran
Steven Cooreman
Wenqi Liu
Junhe Lian
Sebastian Münstermann
Patricia Verleysen
C1
Conference
2022
Pipelines distribution : factors affecting material degradation during gaseous hydrogen transport
Aurélie Laureys
Robin Depraetere
Margo Cauwels
Stijn Hertelé
Kim Verbeken
Tom Depover
C3
Conference
2022
Single edge notched tension testing for assessing hydrogen embrittlement : a numerical study of test parameter influences
Robin Depraetere
Wim De Waele
Margo Cauwels
Tom Depover
Kim Verbeken
Stijn Hertelé
C1
Conference
2022
Technology for Future and Ageing Pipelines : TFAP 2022 Conference Proceedings
Book editor
2022
The influence of NDE and finite element modelling parameters in the integration of 3D NDE to FEA-based defect analysis
Somsubhro Chaudhuri
Laurens De Wilde
Robin Motte
Otto Jan Huising
Stijn Hertelé
C1
Conference
2022
Use of existing steel pipeline infrastructure for gaseous hydrogen storage and transport : a review of factors affecting hydrogen induced degradation
Aurélie Laureys
Robin Depraetere
Margo Cauwels
Tom Depover
Stijn Hertelé
Kim Verbeken
A1
Journal Article
in
JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING
2022
2021
A numerical framework to analyze three dimensional stress state during scratch abrasion
Dhanraj Rajaraman
Dieter Fauconnier
Stijn Hertelé
C3
Conference
2021
An interdisciplinary framework to predict premature roller element bearing failures in wind turbine gearboxes
Gopalakrishnan Ravi
Pieter-Jan Daems
Ksenija Nikolic
Wim De Waele
Jan Helsen
Roumen Petrov
Kim Verbeken
Bart Teerlinck
Stijn Hertelé
A1
Journal Article
in
FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH
2021
Crack driving force calculation in arbitrarily shaped defects based on 3D non-destructive evaluation and finite element analysis
Stijn Hertelé
Vitor Soares Rabelo Adriano
Somsubhro Chaudhuri
Laurens De Wilde
Otto Jan Huising
C1
Conference
2021
Damage modelling of scratch abrasion resistance
Dhanraj Rajaraman
Dieter Fauconnier
Stijn Hertelé
C3
Conference
2021
Fully-coupled continuum damage model for simulation of plasticity dominated hydrogen embrittlement mechanisms
Robin Depraetere
Wim De Waele
Stijn Hertelé
A1
Journal Article
in
COMPUTATIONAL MATERIALS SCIENCE
2021
Hydrogen induced degradation of an X70 pipeline steel
Margo Cauwels
Robin Depraetere
Wim De Waele
Tom Depover
Stijn Hertelé
Kim Verbeken
C3
Conference
2021
Influence of weld porosity on crack size estimations in Single Edge Notched Tension (SENT) testing of steels : a numerical study
Vitor Soares Rabelo Adriano
Robin Depraetere
Wim De Waele
Stijn Hertelé
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2021
Investigation of Lode angle parameter evolution for cutting mechanism of scratch abrasion
Dhanraj Rajaraman
Stijn Hertelé
Dieter Fauconnier
C1
Conference
2021
Microstructural investigation and identification of intermetallic σ-phase in solution annealed 316L-type austenitic stainless steel
Amke Lescur
Erich Stergar
Jun Lim
Stijn Hertelé
Roumen Petrov
A1
Journal Article
in
MATERIALS CHARACTERIZATION
2021
Numerical methodology to predict subsurface crack initiation from non-metallic inclusions due to rolling contact fatigue
Gopalakrishnan Ravi
Wim De Waele
Stijn Hertelé
C1
Conference
2021
On the experimental estimation of CTOD fracture parameter using SE(T) specimens based upon only one clip gauge measurement
Marcus Nathan Silvestre
Stijn Hertelé
Diego F.B. Sarzosa
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2021
Stress state characterization of ductile materials during scratch abrasion
Dhanraj Rajaraman
V. Keim
Kannaki Shanmugham Pondicherry
A. Nonn
Stijn Hertelé
Dieter Fauconnier
A1
Journal Article
in
WEAR
2021
2020
A comprehensive study on the microstructure and mechanical properties of arc girth welded joints of spiral welded high strength API X70 steel pipe
M. St. Węglowski
S. Dymek
M. Kopyściański
J. Niagaj
J. Rykała
Wim De Waele
Stijn Hertelé
A1
Journal Article
in
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
2020
Calibrating a ductile damage model for two pipeline steels : method and challenges
Robin Depraetere
Margo Cauwels
Wim De Waele
Tom Depover
Kim Verbeken
Stijn Hertelé
P1
Conference
2020
Effects of complex heterogeneous constitutive properties on the structural integrity of a flawed weld
Sameera Naib
Wim De Waele
Stijn Hertelé
Dissertation
2020
Influence of small volumetric flaws on the measurement of crack growth and tearing resistance in SENT tests
Vitor Soares Rabelo Adriano
Eleine Cardon
Wim De Waele
Stijn Hertelé
Matthieu Boone
P1
Conference
2020
Investigation of rolling contact fatigue crack initiation from non-metallic inclusions in bearings
Gopalakrishnan Ravi
Ksenija Nikolić
Wim De Waele
Roumen Petrov
Kim Verbeken
Stijn Hertelé
C3
Conference
2020
Numerical studies to investigate the effect of inclusion-matrix debonding on subsurface crack initiation due to rolling contact fatigue in bearings
Gopalakrishnan Ravi
Ksenija Nikolić
Roumen Petrov
Kim Verbeken
Wim De Waele
Stijn Hertelé
C3
Conference
2020
Optimization and validation of a load-controlled numerical model for single asperity scratch
Kannaki Shanmugham Pondicherry
Dhanraj Rajaraman
Timothy Galle
Stijn Hertelé
Dieter Fauconnier
Patrick De Baets
A1
Journal Article
in
TRIBOLOGY LETTERS
2020
2019
Accelerated ultra high cycle fatigue testing
Saeedeh Bakhtiari
Stijn Hertelé
Wim De Waele
C3
Conference
2019
Assessment of ultra-high cycle fatigue behavior of EN-GJL-250 cast iron using ultrasonic fatigue testing machine
Saeedeh Bakhtiari
Johannes Depessemier
Stijn Hertelé
Wim De Waele
A2
Journal Article
in
INTERNATIONAL JOURNAL OF MECHANICAL AND MATERIALS ENGINEERING
2019
Constraint corrected cycle-by-cycle analysis of crack growth retardation under variable amplitude fatigue loading
Jie Zhang
Louis Muys
Steven De Tender
Nahuel Micone
Stijn Hertelé
Wim De Waele
A1
Journal Article
in
INTERNATIONAL JOURNAL OF FATIGUE
2019
Crack tip constraint analysis in welded joints with pronounced strength and toughness heterogeneity
Primož Štefane
Sameera Naib
Stijn Hertelé
Wim De Waele
Nenad Gubeljak
A1
Journal Article
in
THEORETICAL AND APPLIED FRACTURE MECHANICS
2019
Critical comparison of hot spot stress approaches : a case study for a welded machine component
Wim De Waele
Jie Zhang
Kaveh Samadian
Stijn Hertelé
Thomas De Craemer
C3
Conference
2019
Damage modelling of scratch abrasion resistance
Dhanraj Rajaraman
Stijn Hertelé
Dieter Fauconnier
C3
Conference
2019
Development of experimental and numerical methods for flaw interaction assessment in a strain-based context
Kaveh Samadian
Wim De Waele
Stijn Hertelé
Dissertation
2019
Development of frameworks for numerical modelling of corrosion fatigue in offshore structures
Jie Zhang
Wim De Waele
Stijn Hertelé
Dissertation
2019
Effects of flaw shape (idealization) on the interaction of co-planar surface flaws
Kaveh Samadian
Stijn Hertelé
Wim De Waele
P1
Conference
2019
Fatigue crack propagation in HSLA steel specimens subjected to unordered and ordered load spectra
Jie Zhang
Sven Trogh
Wim De Waele
Stijn Hertelé
C1
Conference
2019
Initiation and propagation modelling of white etching cracks (WEC) in roller bearings
Gopalakrishnan Ravi
Wim De Waele
Stijn Hertelé
C3
Conference
2019
Measurement of CTOD along a surface crack by means of digital image correlation
Kaveh Samadian
Stijn Hertelé
Wim De Waele
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2019
Proof of concept of integrating 3-dimensional nde information into finite element analysis
Vitor Soares Rabelo Adriano
Stijn Hertelé
Wim De Waele
Otto Jan Huising
C1
Conference
2019
Tearing resistance of heterogeneous welds in Single Edge notched Tensile (SE(T)) testing
Sameera Naib
Primož Štefane
Wim De Waele
Nenad Gubeljak
Stijn Hertelé
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2019
The effect of hydrostatic stress on the hydrogen induced mechanical degradation of dual phase steel : a combined experimental and numerical approach
Tom Depover
Stijn Hertelé
Kim Verbeken
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2019
2018
A non-linear model for corrosion fatigue lifetime based on continuum damage mechanics
Jie Zhang
Stijn Hertelé
Wim De Waele
P1
Conference
2018
A strain-based approach to study interaction between non-coplanar through-thickness edge notches
Kaveh Samadian
Stijn Hertelé
Wim De Waele
A1
Journal Article
in
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
2018
Analytical limit load predictions in heterogeneous welded single edge notched tension specimens
Sameera Naib
Wim De Waele
Primož Štefane
Nenad Gubeljak
Stijn Hertelé
P1
Conference
2018
Calibration of hardness transfer functions based on micro tensile and all weld metal tensile tests of heterogeneous welds
Sameera Naib
Primož Štefane
Wim De Waele
Nenad Gubeljak
Stijn Hertelé
C1
Conference
2018
Characterization of crack growth in heterogeneous welds using single edge notched tension (SE(T)) specimens
Sameera Naib
Primoz Stefane
Wim De Waele
Nenad Gubeljak
Stijn Hertelé
C1
Conference
2018
Corrosion fatigue in offshore structures
Jie Zhang
Wim De Waele
Stijn Hertelé
C3
Conference
2018
Crack driving force prediction in heterogeneous welds using Vickers hardness maps and hardness transfer functions
Sameera Naib
Wim De Waele
Primož Štefane
Nenad Gubeljak
Stijn Hertelé
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2018
Durability analysis of machine components in ultra-high (>10^7) cycle fatigue (UHCF)
Saeedeh Bakhtiari
Wim De Waele
Stijn Hertelé
C3
Conference
2018
Effect of crack length on fracture toughness of welded joints with pronounced strength heterogeneity
Primož Štefane
Sameera Naib
Stijn Hertelé
Wim De Waele
Nenad Gubeljak
P1
Conference
2018
Elastic-plastic interaction between adjacent pipeline girth weld defects
Kaveh Samadian
Stijn Hertelé
Wim De Waele
C1
Conference
2018
Experimental investigation of strain capacity of pipelines with heterogeneous strength properties
Susanne Höhler
Andreas Mondry
Christoph Kalwa
Kaveh Samadian
Koen Van Minnebruggen
Wim De Waele
Stijn Hertelé
A2
Journal Article
in
3R INTERNATIONAL
2018
Experimental-numerical assessment of vintage pipe and girth weld with a geometrically complex corrosion feature
Stijn Hertelé
Timothy Galle
Koen Van Minnebruggen
Wim De Waele
Otto Jan Huising
P1
Conference
2018
Finite element analysis of fretting fatigue fracture in lug joints made of high strength steel
Reza Hojjati Talemi
Jie Zhang
Stijn Hertelé
Wim De Waele
P1
Conference
2018
Identification and prediction of mixed-mode fatigue crack path in high strength low Alloy steel
Jie Zhang
Cedric Kiekens
Stijn Hertelé
Wim De Waele
C1
Conference
2018
Influence of material heterogeneity on the strain capacity of pipelines
Susanne Hoehler
Andreas Mondry
Christoph Kalwa
Kaveh Samadian
Wim De Waele
Stijn Hertelé
P1
Conference
2018
Influence of material heterogeneity on the strain capacity of pipelines : part 1 : curved and medium wide plate testing
Stijn Hertelé
Wim De Waele
Koen Van Minnebruggen
Kaveh Samadian
Susanne Höhler
Andreas Mondry
Christoph Kalwa
C1
Conference
2018
Influence of material heterogeneity on the strain capacity of pipelines : part 2 : full-scale bending test
Susanne Höhler
Andreas Mondry
Christoph Kalwa
Koen Van Minnebruggen
Stijn Hertelé
C1
Conference
2018
Load bearing capacity of corroded girth welds in vintage pipelines below the ductile-to-brittle transition temperature
Stijn Hertelé
Koen Van Minnebruggen
Kaveh Samadian
Wim De Waele
Paul Roovers
C1
Conference
2018
Pipeline integrity management system
Bart Koppens
Rudi Denys
Stijn Hertelé
Koen Van Minnebruggen
C1
Conference
2018
Technology for future and ageing pipelines conference : proceedings
Book editor
2018
Using 3D Digital Image Correlation (3D-DIC) to measure CTOD in a semi-elliptical surface crack
Kaveh Samadian
Stijn Hertelé
Wim De Waele
C1
Conference
2018
2017
A comparison of fatigue lifetime prediction models applied to variable amplitude loading
Tom Nottebaere
Nahuel Micone
Wim De Waele
A4
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2017
A novel flaw alignment approach based on the analysis of bands of maximum strain using full-field deformation measurements
Kaveh Samadian
Stijn Hertelé
Wim De Waele
P1
Conference
2017
Assessment of hyperelastic material models for the application of adhesive point-fixings between glass and metal
Jonas Dispersyn
Stijn Hertelé
Wim De Waele
Jan Belis
A1
Journal Article
in
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
2017
Crack growth characterization in single-edge notched tension testing by means of direct current potential drop measurement
Koen Van Minnebruggen
Stijn Hertelé
Matthias Verstraete
Wim De Waele
A1
Journal Article
in
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
2017
Cycle-by-cycle simulation of variable amplitude fatigue crack propagation
Louis Muys
Jie Zhang
Nahuel Micone
Wim De Waele
Stijn Hertelé
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2017
Effects of complex heterogeneous constitutive properties on the structural integrity of a flawed weld
Sameera Naib
Wim De Waele
Primoz Stefane
Nenad Gubeljak
Stijn Hertelé
C3
Conference
2017
Elastic-plastic defect interaction in (a)symmetrical double edge notched tension specimens
Kaveh Samadian
Stijn Hertelé
Wim De Waele
A2
Journal Article
in
AIMS MATERIALS SCIENCE
2017
Evaluation of slip line theory assumptions for integrity assessnment of defected welds loaded in tension
Sameera Naib
Wim De Waele
Primož Štefane
Nenad Gubeljak
Stijn Hertelé
P1
Conference
2017
Evaluation of weld homogenization schemes based on plastic loading of single edge notched tension (SE(T)) tests
Sameera Naib
Wim De Waele
Stijn Hertelé
P1
Conference
2017
Experimental and numerical analysis of deformation patterns in notched heterogeneous welds
Marc Giménez Avalos
Florence Keppens
Sameera Naib
Wim De Waele
Stijn Hertelé
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2017
Experimental and numerical plasticity analysis of heterogeneous welds
Sameera Naib
Wim De Waele
Primoz Stefane
Nenad Gubeljak
Stijn Hertelé
C3
Conference
2017
Fatigue damage models of welded components in gigacycle (a review)
Saeedeh Bakhtiari
Stijn Hertelé
Wim De Waele
C3
Conference
2017
Finite-element model development of single asperity scratch : a step by step approach
Kannaki Shanmugham Pondicherry
Timothy Galle
Jacob Sukumaran
Dieter Fauconnier
Stijn Hertelé
PATRICK DE BAETS
C1
Conference
2017
Flaw interaction and recategorization rules in strain based flaw assessment
Kaveh Samadian
Stijn Hertelé
Wim De Waele
C3
Conference
2017
Fracture mechanics
Stijn Hertelé
Book
2017
Microstructural evolution study of severely deformed commercial aluminium by transmission Kikuchi diffraction
Soroosh Naghdy
Lisa Le Percq
Roger Serret Aracil
Roumen Petrov
Stijn Hertelé
Leo Kestens
Patricia Verleysen
A1
Journal Article
in
MATERIALS SCIENCE AND TECHNOLOGY
2017
Numerical study on the influcence of scratch parameters in single asperity abrasion of steels
Kannaki Shanmugham Pondicherry
Timothy Galle
Xiaojun Xu
Jacob Sukumaran
Dieter Fauconnier
Stijn Hertelé
PATRICK DE BAETS
C3
Conference
2017
Plastic load prediction of HAZ notched heterogeneous welds loaded in tension
Sameera Naib
Wim De Waele
Primož Štefane
Nenad Gubeljak
Stijn Hertelé
C3
Conference
2017
Shear behaviour of prestressed precast SFRC girders
Tim Soetens
Stijn Matthys
Stijn Hertelé
Wim De Waele
A1
Journal Article
in
ENGINEERING STRUCTURES
2017
Strain capacity of girth welded joints in HSAW pipes
Koen Van Minnebruggen
Stijn Hertelé
Wim De Waele
P1
Conference
2017
Sustainable construction and design
Book editor
2017
2016
3D Finite-element analysis of single asperity abrasion: Effect of indenter geometry
Kannaki Shanmugham Pondicherry
Tongyan Yue
Stijn Hertelé
Jacob Sukumaran
Dieter Fauconnier
PATRICK DE BAETS
C3
Conference
2016
Accelerating corrosion in a laboratory set-up for corrosion-fatigue of offshore steels
Michiel Depoortere
Olivier Rogge
Nahuel Micone
Wim De Waele
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2016
Application of digital image correlation in linear structural adhesive glass-metal connection testing
Bert Van Lancker
Stijn Hertelé
Wouter De Corte
Jonas Dispersyn
Wim De Waele
Jan Belis
C1
Conference
2016
Characterization of heterogeneous arc welds through miniature tensile testing and Vickers hardness mapping
Stijn Hertelé
Jonas Bally
Nenad Gubeljak
Primoz Stefane
Patricia Verleysen
Wim De Waele
A1
Journal Article
in
MATERIALI IN TEHNOLOGIJE
2016
Evaluation and comparison of double clip gauge method and delta 5 method for CTOD measurements in SE(T) specimens
Koen Van Minnebruggen
Matthias Verstraete
Stijn Hertelé
Wim De Waele
A1
Journal Article
in
JOURNAL OF TESTING AND EVALUATION
2016
Evaluation of a finite element model for SENT testing of welded connections
Matthijs De Visschere
Sameera Naib
Wim De Waele
Stijn Hertelé
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2016
Evolution of microstructure and texture in commercial pure aluminum subjected to high pressure torsion processing
Soroosh Naghdy
Leo Kestens
Stijn Hertelé
Patricia Verleysen
A1
Journal Article
in
MATERIALS CHARACTERIZATION
2016
Experimental and numerical slip line analysis of welded single-edge notched tension specimens
Stijn Hertelé
Filip Van Gerven
Sameera Naib
Nenad Gubeljak
Wim De Waele
P1
Conference
2016
Improve safety by reducing the impact of external corrosion on pipelines
Stijn Hertelé
C3
Conference
2016
Influence of pipe steel heterogeneity on the upper bound tensile strain capacity of pipeline girth welds: a validation study
Stijn Hertelé
Koen Van Minnebruggen
Matthias Verstraete
Rudi Denys
Wim De Waele
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2016
International journal of sustainable construction and design
Book editor
2016
Modelling framework for 3D fatigue crack propagation in welds of offshore steel structures
Jie Zhang
Stijn Hertelé
Nahuel Micone
Wim De Waele
P1
Conference
2016
Numerical simulation of ductile crack growth in medium wide plate specimens using 3-D computational cells
Diego Sarzosa
Matthias Verstraete
Stijn Hertelé
Rudi Denys
Claudio Ruggieri
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2016
Online fatigue crack growth monitoring with clip gauge and direct current potential drop
Steven De Tender
Nahuel Micone
Wim De Waele
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2016
Sensitivity study of crack driving force predictions in heterogeneous welds using Vickers hardness maps
Sameera Naib
Koen Van Minnebruggen
Wim De Waele
Stijn Hertelé
C3
Conference
2016
Structural integrity of corroded girth welds in vintage steel pipelines
Stijn Hertelé
Andrew Cosham
Paul Roovers
A1
Journal Article
in
ENGINEERING STRUCTURES
2016
2015
A complementary eta(pl) approach in J and CTOD estimations for clamped SENT specimens
Enyang Wang
Wim De Waele
Stijn Hertelé
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2015
Ageing pipelines conference: proceedings of the ageing Pipelines Conference, 7-9 October 2015, Ostend, Belgium
Book editor
2015
Assessment of corrosion associated with the girth or long seam weld in vintage pipelines (EPRG project 177/2014)
Paul Roovers
Troy Swankie
Stijn Hertelé
C1
Conference
2015
Characterisation of weld heterogeneity through hardness mapping and miniature tensile testing
Jonas Bally
Wim De Waele
Patricia Verleysen
Nenad Gubeljak
Stijn Hertelé
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2015
Characterization of heterogeneous arc welds through miniature tensile testing and Vickers hardness mapping
Stijn Hertelé
Nenad Gubeljak
Primoz Stefane
Patricia Verleysen
Wim De Waele
C3
Conference
2015
Characterization of slip lines in single edge notched tension specimens
Filip Van Gerven
Wim De Waele
Diego Belato Rosado
Stijn Hertelé
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2015
Characterization of surface morphology and its correlation with friction performance of brake pads
Patrick Daniel Neis
Ney Francisco Ferreira
Jacob Sukumaran
PATRICK DE BAETS
Matyas Ando
Luciano Tedesco Matozo
Diego Masotti
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION & DESIGN
2015
Comparison of girth weld tearing resistance obtained from curved wide plate and single edge notch tensile testing
Matthias Verstraete
Wim De Waele
Koen Van Minnebruggen
Stijn Hertelé
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2015
Design of a tribological ball joint tester
Sebastien Raes
Thibault Devreese
Jan De Pauw
Patrick De Baets
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2015
Determination of tensile strain capacity of spiral welded pipelines
Koen Van Minnebruggen
Stijn Hertelé
Philippe Thibaux
Rudi Denys
Wim De Waele
C1
Conference
2015
Development of collapse equations for corroded girth welds in vintage pipelines
Stijn Hertelé
Andrew Cosham
Rudi Denys
Antoon Lefevre
Paul Roovers
C1
Conference
2015
Effect of heterogeneous microstructures on global mechanical properties of welded joint
Nenad Gubeljak
Stijn Hertelé
Primoz Stefane
Jozef Predan
Wim De Waele
C3
Conference
2015
Effects of specimen geometry and anisotropic material response on the tensile strain capacity of flawed spiral welded pipes
Koen Van Minnebruggen
Stijn Hertelé
Philippe Thibaux
Wim De Waele
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2015
Effects of variable amplitude loading on fatigue life
Niels Laseure
Ingmar Schepens
Nahuel Micone
W De Waele
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2015
Evaluation of ductile tearing for API-5L X70 pipeline grade steel using sent specimens
Nicholas Ohms
Diego Belato Rosado
Wim De Waele
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION & DESIGN : INTERNATIONAL JOURNAL
2015
Experimental and numerical analysis of welding of girth welded joints
Marek Weglowski
Piotr Sedek
Janusz Pikula
Robert Jachym
Krzysztof Kwiecinski
Eugeniusz Turyk
Jerzy Niagaj
Janusz Rykala
Wim De Waele
Stijn Hertelé
C1
Conference
2015
Failure prediction of curved wide plates using the strain-based failure assessment diagram with correction for constraint and notch radius
Anthony Horn
Mikhail Trull
Stijn Hertelé
A1
Journal Article
in
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
2015
Flaw interaction and recategorization rules in strain based flaw assessment
Kaveh Samadian
Wim De Waele
Stijn Hertelé
C3
Conference
2015
Fracture mechanics analysis of heterogeneous welds: numerical case studies involving experimental heterogeneity patterns
Stijn Hertelé
O'Dowd Noel
Koen Van Minnebruggen
Matthias Verstraete
Wim De Waele
A1
Journal Article
in
ENGINEERING FAILURE ANALYSIS
2015
Framework for key influences on tensile strain capacity of flawed girth welds
Stijn Hertelé
Rudi Denys
Anthony Horn
Koen Van Minnebruggen
Wim De Waele
A1
Journal Article
in
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
2015
Low temperature tensile properties of line pipe steels
Harold Tubex
Koen Van Minnebruggen
Wim De Waele
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2015
Pipeline renewal or lifetime extension?
Bart Koppens
Rudi Denys
Stijn Hertelé
Antoon Lefevre
C1
Conference
2015
Remote data acquisition for condition monitoring of wind turbines
Bavo De Maré
Jacob Sukumaran
Mia Loccufier
PATRICK DE BAETS
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION & DESIGN
2015
Resterende sterkte van gecorrodeerde omtreklassen uit pijpleidingen
Stijn Hertelé
Rudi Denys
Antoon Lefevre
Paul Roovers
C3
Conference
2015
Single-specimen evaluation of tearing resistance in SENT testing
Matthias Verstraete
Wim De Waele
Koen Van Minnebruggen
Stijn Hertelé
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2015
Study of SENT specimens with a tilted notch to evaluate ductile tearing in spiral welded pipeline applications
Maxime Deprez
Frédéric Keereman
Koen Van Minnebruggen
Stijn Hertelé
Wim De Waele
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2015
Testing methodologies for corrosion fatigue
Edward Delmotte
Nahuel Micone
Wim De Waele
A2
Journal Article
in
Sustainable Construction and Design
2015
The influence of material anisotropy and spiral welding on tensile strain capacity of spiral welded pipes
Michiel De Backer
Koen Van Minnebruggen
Wim De Waele
A2
Journal Article
in
SUSTAINABLE CONSTRUCTION AND DESIGN
2015
2014
Advanced characterization of heterogeneous arc welds using micro tensile tests and a two-stage strain hardening (‘UGent’) model
Stijn Hertelé
Nenad Gubeljak
Wim De Waele
A1
Journal Article
in
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
2014
Constraint analysis of defects in strength mismatched girth welds of (pressurized) pipe and curved wide plate tensile test specimens
Matthias Verstraete
Wim De Waele
Rudi Denys
Koen Van Minnebruggen
Stijn Hertelé
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2014
Determination of CTOD resistance curves in SENT specimens with a tilted notch
Koen Van Minnebruggen
Matthias Verstraete
Stijn Hertelé
Philippe Thibaux
Wim De Waele
P1
Conference
2014
Effects of pipe steel heterogeneity on the tensile strain capacity of a flawed pipeline girth weld
Stijn Hertelé
Noel O'Dowd
Koen Van Minnebruggen
Rudi Denys
Wim De Waele
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2014
Effects of weld strength heterogeneity on crack driving force in stress and strain based design scenarios
Stijn Hertelé
Noel O'Dowd
Matthias Verstraete
Koen Van Minnebruggen
Wim De Waele
P1
Conference
2014
Evaluation and interpretation of ductile crack extension in SENT specimens using unloading compliance technique
Matthias Verstraete
Stijn Hertelé
Rudi Denys
Koen Van Minnebruggen
Wim De Waele
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2014
Failure prediction of curved wide plates using the strain-based failure assessment diagram with correction for constraint and notch radius
Anthony Horn
Mikhail Trull
Stijn Hertelé
P1
Conference
2014
Fracture mechanics analysis of heterogeneous welds : validation of a weld homogenisation approach
Stijn Hertelé
Noel O'Dowd
Koen Van Minnebruggen
Matthias Verstraete
Wim De Waele
P1
Conference
2014
Framework for key influences on tensile strain capacity of flawed girth welds
Stijn Hertelé
Rudi Denys
Anthony Horn
Koen Van Minnebruggen
Wim De Waele
P1
Conference
2014
Influence of notch orientation on ductile tearing in SENT specimens
R Turtelboom
P Vandenbroucke
Koen Van Minnebruggen
Stijn Hertelé
Matthias Verstraete
Wim De Waele
C1
Conference
2014
Instrumented indentation for determination of full range stress-strain curves
A De Smedt
Stijn Hertelé
Matthias Verstraete
Koen Van Minnebruggen
Wim De Waele
C1
Conference
2014
J-integral analysis of heterogeneous mismatched girth welds in clamped single-edge notched tension specimens
Stijn Hertelé
Wim De Waele
Matthias Verstraete
Rudi Denys
Noel O'Dowd
A1
Journal Article
in
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
2014
Multi-wire submerged arc welding: a study of secondary process parameters
W Boudry
E Delboo
K Faes
E Van Pottelberg
Wim De Waele
C1
Conference
2014
R-curve evaluation of pipeline girth welds using advanced measurement techniques
N Geldhof
J Van Iseghem
Matthias Verstraete
Stijn Hertelé
Koen Van Minnebruggen
Wim De Waele
C1
Conference
2014
Review on the possible tool materials for friction stir welding of steel plates
A Sierens
J Vanvooren
K Deplus
K Faes
Wim De Waele
C1
Conference
2014
2013
Alkali treatment and its effect on tribological properties of naturally woven coconut sheath polyester composite
Siva Irullappasamy
Winowlin Jebas Thangiah
Zoltan Szakál
Jacob Sukumaran
C1
Conference
2013
Applications of digital image correlation in girth weld testing
Stijn Hertelé
Matthias Verstraete
Koen Van Minnebruggen
Rudi Denys
Wim De Waele
C1
Conference
2013
Combined numerical-experimental framework for strain based design and flaw assessment of girth welds
Stijn Hertelé
Rudi Denys
Koen Van Minnebruggen
Matthias Verstraete
Wim De Waele
C1
Conference
2013
Comparison of pipeline girth weld defect acceptance at the onset of yielding according to CSA Z662 and EPRG guidelines
Matthias Verstraete
Wim De Waele
Rudi Denys
Stijn Hertelé
P1
Conference
2013
Considerations in selecting laboratory scale test specimens for evaluation of fracture toughness
Matthias Verstraete
Stijn Hertelé
Koen Van Minnebruggen
Rudi Denys
Wim De Waele
C1
Conference
2013
Curved wide plate testing with advanced instrumentation and interpretation
Stijn Hertelé
Matthias Verstraete
Koen Van Minnebruggen
Rudi Denys
Wim De Waele
P1
Conference
2013
Determination of CTOD resistance curves in side-grooved Single–Edge Notched Tensile specimens using full field deformation measurements
Matthias Verstraete
Rudi Denys
Koen Van Minnebruggen
Stijn Hertelé
Wim De Waele
A1
Journal Article
in
ENGINEERING FRACTURE MECHANICS
2013
Determination of tearing resistance in SENT and CWP specimens using direct current potential drop measurements
Matthias Verstraete
Koen Van Minnebruggen
Stijn Hertelé
Rudi Denys
Wim De Waele
C1
Conference
2013
Development of a finite element model for spiral welded pipes loaded in tension
Koen Van Minnebruggen
Stijn Hertelé
Matthias Verstraete
Jeroen Van Wittenberghe
Philippe Thibaux
Rudi Denys
Wim De Waele
C1
Conference
2013
Effects of line pipe steel heterogeneity on tensile strain capacity
Stijn Hertelé
Koen Van Minnebruggen
Matthias Verstraete
Rudi Denys
Wim De Waele
C1
Conference
2013
Finite element analysis of crack driving force and mode mixity for spiral pipe seam weld flaws
Koen Van Minnebruggen
Matthias Verstraete
Stijn Hertelé
Jeroen Van Wittenberghe
Philippe Thibaux
Rudi Denys
Wim De Waele
C1
Conference
2013
Global collapse and J integral analysis for inner-diameter defected curved plates in tension
Stijn Hertelé
Matthias Verstraete
Rudi Denys
Wim De Waele
A1
Journal Article
in
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
2013
Influence of anisotropy on flaw acceptability in spiral welded pipe sections
Koen Van Minnebruggen
Stijn Hertelé
Matthias Verstraete
Philippe Thibaux
Jeroen Van Wittenberghe
Wim De Waele
Rudi Denys
C1
Conference
2013
Influence of corrosion in vicinity to girth welds on the structural integrity of pipelines
Stijn Hertelé
Rudi Denys
Antoon Lefevre
Paul Roovers
C1
Conference
2013
Latest developments in mechanical properties and metallurgical features of high strength line pipe steels
Diego Belato Rosado
Wim De Waele
Dirk Vanderschueren
Stijn Hertelé
C1
Conference
2013
Methodology for characterizing brake friction material on high temperatures
Patrick Daniel Neis
Jacob Sukumaran
Yeczain Perez Delgado
Mátyás Andó
Ney Francisco Ferreira
PATRICK DE BAETS
C1
Conference
2013
Pressure correction factor for strain capacity predictions based on curved wide plate testing
Matthias Verstraete
Wim De Waele
Rudi Denys
Stijn Hertelé
P1
Conference
2013
Sensitivity of plastic response of defective pipeline girth welds to the stress-strain behaviour of base and weld metal
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
A1
Journal Article
in
JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME
2013
Strain capacity prediction for strain-based pipeline designs
Rudi Denys
Stijn Hertelé
Wim De Waele
C1
Conference
2013
Structural integrity of corroded girth welds
Stijn Hertelé
Rudi Denys
Antoon Lefevre
Paul Roovers
C1
Conference
2013
Sustainable construction & design
Book editor
2013
Tribological behaviour of polymer bearings under dry and water lubrication
Tan Dat Nguyen
Jacob Sukumaran
Jan De Pauw
PATRICK DE BAETS
C1
Conference
2013
Tribological behaviour of the low and high viscosity peek against steel using different contact pressures
Vanessa Rodriguez Fereira
Jacob Sukumaran
Yeczain Perez Delgado
PATRICK DE BAETS
Mátyás Andó
C1
Conference
2013
UGent guidelines for SENT testing
Matthias Verstraete
Stijn Hertelé
Koen Van Minnebruggen
Rudi Denys
Wim De Waele
C1
Conference
2013
Use of curved-wide-plate (CWP) data for the prediction of girth-weld integrity
Rudi Denys
Stijn Hertelé
Antoon Lefevre
A2
Journal Article
in
JOURNAL OF PIPELINE ENGINEERING
2013
Weld strength mismatch in strain based flaw assessment: which definition to use?
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
Koen Van Minnebruggen
Anthony Horn
A1
Journal Article
in
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
2013
2012
Analysis of API 5C3 failure prediction formulae for casing and tubing
Seppe Staelens
Timothy Galle
Wim De Waele
Patrick De Baets
C1
Conference
2012
Characterization of mechanical properties in weld metal using inverse modelling
Jurgen Beddeleem
Wim De Waele
Stijn Hertelé
Matthias Verstraete
Koen Van Minnebruggen
C1
Conference
2012
Constraint analysis of curved wide plate specimens
Matthias Verstraete
Wim De Waele
Stijn Hertelé
Koen Van Minnebruggen
Rudi Denys
C1
Conference
2012
Contact mechanics in fretting fatigue
Jan De Pauw
Patrick De Baets
Wim De Waele
Reza Hojjati Talemi
C1
Conference
2012
Coupled experimental-numerical framework for the assessment of strain capacity of flawed girth welds in pipelines
Stijn Hertelé
Wim De Waele
Dissertation
2012
Design of a four-point bend test for ultra-low cycle fatigue of pipelines under inelastic bending
Toon Muylaert
Wim De Waele
C1
Conference
2012
Digitale beeldcorrelatie ondersteunt mechanische lasbeproeving
Matthias Verstraete
Stijn Hertelé
Wim De Waele
A4
Journal Article
in
LASTECHNIEK (ROTTERDAM)
2012
Evaluation and instrumentation of the drop weight tear test
Servaas Vervaet
Wim De Waele
C1
Conference
2012
Experimental analysis of the fatigue life of threaded pipe connections under cyclic bending
Jeroen Van Wittenberghe
Timothy Galle
Wim De Waele
Patrick De Baets
C1
Conference
2012
FEA modeling of orthogonal cutting of steel: a review
Felicia Camelia Jula
Timothy Galle
Wim De Waele
Marian Borzan
C1
Conference
2012
Full-range stress-strain behaviour of contemporary pipeline steels: Part I: model description
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
A1
Journal Article
in
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
2012
Full-range stress-strain behaviour of contemporary pipeline steels: part II: estimation of model parameters
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
A1
Journal Article
in
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
2012
Influence and evaluation of constraint on fracture toughness in pipeline research
Matthias Verstraete
Stijn Hertelé
Wim De Waele
Rudi Denys
C1
Conference
2012
Instability due to internal damping of rotating shafts
W Lemahieu
Mia Loccufier
Bram Vervisch
Patrick De Baets
C1
Conference
2012
Investigation of strain measurements in (curved) wide plate specimens using digital image correlation and finite element analysis
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
A1
Journal Article
in
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
2012
Justification of the mapping approach for finite element modelling of ductile tearing
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
C1
Conference
2012
Measurement of ductile crack extension in single edge notch tensile specimens
Matthias Verstraete
Stijn Hertelé
Wim De Waele
Rudi Denys
Koen Van Minnebruggen
P1
Conference
2012
Modal analysis and testing of rotating machines for predictive maintenance: effect of gyroscopic forces
A Vansteenkiste
Mia Loccufier
Bram Vervisch
Patrick De Baets
C1
Conference
2012
Modelling of crack initiation in adhesively bonded joints
Hanan Alali
Magd Abdel Wahab
C1
Conference
2012
Multibody dynamic models in biomechanics : modelling issues and a new model
Gusztáv Fekete
B Csizmadia
Patrick De Baets
Magd Abdel Wahab
C1
Conference
2012
Multiwire submerged arc welding of steel structures
R Dhollander
S Vancauwenberghe
Wim De Waele
Nele Van Caenegem
E Van Pottelberg
C1
Conference
2012
On finite element analysis of fretting fatigue
Reza Hojjati Talemi
Magd Abdel Wahab
Jan De Pauw
C1
Conference
2012
Parametric finite element model for large scale tension tests on flawed pipeline girth welds
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
Jeroen Van Wittenberghe
A1
Journal Article
in
ADVANCES IN ENGINEERING SOFTWARE
2012
Proceedings of the 4th Conference on Sustainable Construction and Design
Book editor
2012
Realisation of micro-speckle patterns for digital image correlation on dental implants
Claudia Cluydts
Wim De Waele
C1
Conference
2012
Resonant bending fatigue test setup for pipes with optical displacement measuring system
Jeroen Van Wittenberghe
Patrick De Baets
Wim De Waele
Wouter Ost
Matthias Verstraete
Stijn Hertelé
A1
Journal Article
in
JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME
2012
Strain based design considerations for spiral welded pipelines
Koen Van Minnebruggen
Wim De Waele
Rudi Denys
Philippe Thibaux
C1
Conference
2012
Validation of a finite element model for fracture mechanics specimens
Matthias Cauwelier
Jens Maelfait
Matthias Verstraete
Stijn Hertelé
Koen Van Minnebruggen
Wim De Waele
C1
Conference
2012
Weld strength mismatch in strain based flaw assessment: which definition to use?
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
Koen Van Minnebruggen
Anthony Horn
P1
Conference
2012
2011
A generic stress-strain model for metallic materials with two-stage strain hardening behaviour
Stijn Hertelé
Wim De Waele
Rudi Denys
A1
Journal Article
in
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
2011
Analytical validation of crack driving force calculations for defects in plates and pipes under tension
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
A2
Journal Article
in
MECHANICAL ENGINEERING LETTERS
2011
Are panoramic images reliable in planning sinus augmentation procedures?
Andy Temmerman
Stijn Hertelé
Wim Teughels
Christel Dekeyser
Reinhilde Jacobs
Marc Quirynen
A1
Journal Article
in
CLINICAL ORAL IMPLANTS RESEARCH
2011
Design of a (mini) wide plate specimen for strain-based weld integrity assessment
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
C1
Conference
2011
Development and validation of a high constraint modified boundary layer finite element model
Matthias Verstraete
Wim De Waele
Stijn Hertelé
C1
Conference
2011
Development of an analytical reference stress equation for inner-diameter defected curved plates in tension
Stijn Hertelé
Wim De Waele
Rudi Denys
A1
Journal Article
in
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
2011
Evaluatie van de vervormingscapaciteit van lasverbindingen
Matthias Verstraete
Wim De Waele
Rudi Denys
Stijn Hertelé
C3
Conference
2011
Evaluation of strength mismatch by FE Analysis and DIC measurements on cross weld tensile specimens
Matthias Verstraete
Wim De Waele
Stijn Hertelé
Rudi Denys
C1
Conference
2011
Gekoppeld experimenteel-numeriek onderzoek naar de vervormingscapaciteit van pijpsecties met omtrekslasfout
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
C3
Conference
2011
Implementation of an unloading compliance procedure for measurement of crack growth in pipeline steel
Koen Van Minnebruggen
Dries Van Puyvelde
Wim De Waele
Matthias Verstraete
Stijn Hertelé
Rudi Denys
C1
Conference
2011
Investigation of strains in a transverse weld tensile test specimen through digital image correlation
Matthias Verstraete
Stijn Hertelé
Wim De Waele
Jan-Baptist Wellekens
C1
Conference
2011
Measurement of ductile crack extension in laboratory scale fracture mechanics testing
Matthias Verstraete
Wim De Waele
Stijn Hertelé
Rudi Denys
Dries Van Puyvelde
Koen Van Minnebruggen
A2
Journal Article
in
MECHANICAL ENGINEERING LETTERS
2011
Modelling crack driving force in plates and pipes under tension: a comparison with literature
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
C1
Conference
2011
Sensitivity of plastic response of defective pipeline girth welds to the stress-strain behavior of base and weld metal
Stijn Hertelé
Wim De Waele
Rudi Denys
Matthias Verstraete
P1
Conference
2011
Validation of a wide plate finite element model using digital image correlation
Karel De Keyser
Frederik Van Acker
Stijn Hertelé
Matthias Verstraete
Wim De Waele
Rudi Denys
C1
Conference
2011
2010
Determination of full range stress-strain behavior of pipeline steels using tensile characteristics
Stijn Hertelé
Wim De Waele
Rudi Denys
P1
Conference
2010
Development of a strain-based flaw assessment method for defective pipeline girth welds
Stijn Hertelé
C3
Conference
2010
Evaluation of pipe bending reference stress equations
Matthias Verstraete
Wim De Waele
Stijn Hertelé
Rudi Denys
C1
Conference
2010
Inherent possibilities and limitations of finite element modelling of defective girth welds
Stijn Hertelé
Wim De Waele
Rudi Denys
Magd Abdel Wahab
Matthias Verstraete
C1
Conference
2010
Interpretation of stress-strain curve in pipeline research
Jan-Baptist Wellekens
Wim De Waele
Rudi Denys
Stijn Hertelé
Matthias Verstraete
C1
Conference
2010
Investigation of pipe strain measurements in a curved wide plate specimen
Stijn Hertelé
Wim De Waele
Rudi Denys
Jeroen Van Wittenberghe
Matthias Verstraete
P1
Conference
2010
Limit load and reference stress for curved wide plates
Stijn Hertelé
Wim De Waele
Rudi Denys
Jeroen Van Wittenberghe
Matthias Verstraete
P1
Conference
2010
Longitudinal strain capacity of GMAW welded high niobium (HTP) grade X80 steel pipes
Rudi Denys
Stijn Hertelé
Matthias Verstraete
C1
Conference
2010
Pipe resonant bending fatigue test setup with optical measuring system
Jeroen Van Wittenberghe
Patrick De Baets
Wim De Waele
Wouter Ost
Matthias Verstraete
Stijn Hertelé
P1
Conference
2010
Strain capacity of weak and strong girth welds in axially loaded pipelines
Rudi Denys
Stijn Hertelé
Matthias Verstraete
C1
Conference
2010
2009
A new stress-strain model for linepipe steels in strain-based design
Stijn Hertelé
Wim De Waele
Rudi Denys
C1
Conference
2009
Development of a strain-based flaw assessment methodology for pipeline welds
Stijn Hertelé
C1
Conference
2009
Estimate of Y/T ratio and uniform elongation capacity of pipeline steels from yield strength
Rudi Denys
Stijn Hertelé
Wim De Waele
Antoon Lefevre
C1
Conference
2009
Full range stress-strain relation modeling of pipeline steels
Stijn Hertelé
Rudi Denys
Wim De Waele
C1
Conference
2009
Full range stress-strain relation modelling of pipeline steels
Stijn Hertelé
Rudi Denys
Wim De Waele
A2
Journal Article
in
JOURNAL OF PIPELINE ENGINEERING
2009
Numerical evaluation of the CMOD of defects in pipeline girth welds under remote plastic deformation
Stijn Hertelé
Wim De Waele
Rudi Denys
Jeroen Van Wittenberghe
C3
Conference
2009
Parametric model for evaluating the performance of threaded pipe connections
Jeroen Van Wittenberghe
Patrick De Baets
Wim De Waele
Stijn Hertelé
C3
Conference
2009