Research Explorer

Your browser does not support JavaScript or JavaScript is not enabled. Without JavaScript some functions of this webapplication may be disabled or cause error messages. To enable JavaScript, please consult the manual of your browser or contact your system administrator.

Researcher

Ruben Sevenois

Awards & Distinctions

48 Results

2024

Experimental study of the thermomechanical properties of polyamide-6 and polyamide-6-based composites for automotive applications

Daniele FinazziWim Van PaepegemRuben Sevenois

Study of self-heating and local strain rate in polyamide-6 and short fibre glass/polyamide-6 under tension through synchronised full-field strain and temperature measurements

Daniele FinazziYuriy SinchukRuben SevenoisLode DaelemansKaren De ClerckGilles RobertWim Van Paepegem

A1 Journal Article in POLYMER TESTING

2023

Characterisation of short fibre composites for automotive applications

Daniele FinazziRuben SevenoisWim Van Paepegem

Characterizing pure polymers under high speed compression for the micromechanical prediction of unidirectional composites

Pei HaoSiebe SpronkRuben SevenoisWim Van PaepegemFrancisco A. Gilabert

A1 Journal Article in POLYMERS

POD-based reduced order model for the prediction of global and local elastic responses of fibre-reinforced polymer considering varying fibre distribution

Arada JamnongpipatkulRuben SevenoisWim DesmetFrank NaetsFrancisco A. Gilabert

A1 Journal Article in COMPUTATIONAL MECHANICS

2022

A multi-scale approach to include microstructural details in the analysis of short fibre composites under in-plane, out-of-plane and flexural loads

Hossein AhmadiDaniele FinazziEhsan RashidinejadYuriy SinchukRuben SevenoisMohammad HajikazemiWim Van Paepegem

Advanced modelling of semi-crystalline polymers and application for micromechanical modelling predictions

Pei HaoRuben SevenoisWim Van PaepegemFrancisco A. Gilabert

Effect of fibre orientation, temperature, moisture content and strain rate on the tensile behaviour of short glass fibre-reinforced polyamide 6

Daniele FinazziRuben SevenoisLode DaelemansKaren De ClerckWim Van Paepegem

Full-field measurement of strain and temperature in tensile testing of short fibre-reinforced thermoplastic composites

Daniele FinazziRuben SevenoisWim Van Paepegem

Numerical study on the effect of matrix self-heating on the thermo-visco-plastic response of continuous fiber-reinforced polymers under transverse tensile loading

Ruben SevenoisPei HaoWim Van PaepegemFrancisco A. Gilabert

A1 Journal Article in POLYMERS

Permanent deformation, stiffness degradation and strength of open hole Glass/PA6 UD thermoplastic composite in tension and compression

Ruben SevenoisWim Van Paepegem

Predicting local and global responses of unidirectional composite by a projection-based model order reduction approach

Arada JamnongpipatkulRuben SevenoisWim DesmetFrank NaetsFrancisco Antonio Gilabert Villegas

Thermo-mechanical modelling of UD composites to investigate self-heating and thermal softening effect of polymer matrix

Pei HaoRuben SevenoisWim Van PaepegemFrancisco A. Gilabert

2021

Effect of fiber packing on POD-based reduced order model for the prediction of elastic properties of continuous fiber-reinforced composite materials

Arada JamnongpipatkulRuben SevenoisWim DesmetWim Van PaepegemFrank NaetsFrancisco Antonio Gilabert Villegas

Permanent deformation and stiffness degradation of open hole glass/PA6 UD thermoplastic composite in tension and compression

Ruben SevenoisXiaoyu YangErik VerbovenMathias KersemansWim Van Paepegem

A1 Journal Article in MATERIALS

2020

Construction of representative unit cells for FE analysis of textile composite plies

Bookchapter in Multi-scale continuum mechanics modelling of fibre-reinforced polymer composites

Investigation on fiber packing geometries towards efficient and realistic prediction of elastic properties of continuous fiber-reinforced composite materials

Arada JamnongpipatkulRuben SevenoisWim DesmetWim Van PaepegemFrank NaetsFrancisco Antonio Gilabert Villegas

Permanent deformation, stiffness degradation and strength of open hole glass/PA6 UD thermoplastic composite in tension and compression

Ruben SevenoisWim Van Paepegem

Prediction of fatigue crack initiation in UD laminates under different stress ratios

Ruben SevenoisWim Van Paepegem

Bookchapter in Fatigue life prediction of composites and composite structures

2019

Consistent application of periodic boundary conditions in implicit and explicit finite element simulations of damage in composites

David Garoz GómezFrancisco Antonio Gilabert VillegasRuben SevenoisSiebe SpronkWim Van Paepegem

A1 Journal Article in COMPOSITES PART B-ENGINEERING

Fatigue testing for polymer matrix composites

Ruben SevenoisWim Van Paepegem

Bookchapter in Creep and fatigue in polymer matrix composites

Influence of tab debonding on measured stiffness evolution in Compression-Compression and Tension-Compression fatigue testing of short gauge length coupons

Ruben SevenoisDavid Garoz GómezFrancisco Antonio Gilabert VillegasC. HochardWim Van Paepegem

A1 Journal Article in COMPOSITES SCIENCE AND TECHNOLOGY

Model order reduction for multi-scale strength simulation of composite materials : preliminary framework

Arada JamnongpipatkulRuben SevenoisWim DesmetWim Van PaepegemFrank NaetsFrancisco Antonio Gilabert Villegas

2018

Comparing damage from low-velocity impact and quasi-static indentation in automotive carbon/epoxy and glass/polyamide-6 laminates

Siebe SpronkMathias KersemansJori C. A. De BaerdemaekerFrancisco A. GilabertRuben SevenoisDavid Garoz GómezChristos KassapoglouWim Van Paepegem

A1 Journal Article in POLYMER TESTING

Dynamic tensile testing of brittle composites using a hydraulic pulse machine : stress-strain synchronization and strain rate limits

Siebe SpronkErik VerbovenFrancisco Antonio Gilabert VillegasRuben SevenoisDavid Garoz GómezMathias KersemansWim Van Paepegem

Effect of intra-ply voids on the homogenized behavior of a ply in multidirectional laminates

A. MatveevaDavid Garoz GómezRuben SevenoisM. ZhuL. PylWim Van PaepegemL. Farkas

Influence of tab debonding on measured stiffness evolution in compression-compression fatigue testing of short gauge length coupons

Ruben SevenoisDavid Garoz GómezSiebe SpronkFrancisco Antonio Gilabert VillegasChristian HochardWim Van Paepegem

Models for intraply damage and strength prediction of unidirectional and woven composites under static and fatigue loading in tension and compression

Ruben SevenoisWim Van PaepegemFrancisco Antonio Gilabert Villegas

Multiscale approach for identification of transverse isotropic carbon fibre properties and prediction of woven elastic properties using ultrasonic identification

Ruben SevenoisDavid Garoz GómezErik VerbovenSiebe SpronkFrancisco Antonio Gilabert VillegasMathias KersemansL. PylWim Van Paepegem

A1 Journal Article in COMPOSITES SCIENCE AND TECHNOLOGY

Multiscale approach to predict the orthotropic elasticity tensor of carbon fibres and woven carbon composites by ultrasonic insonification

Ruben SevenoisSiebe SpronkDavid Garoz GómezFrancisco Antonio Gilabert VillegasErik VerbovenMathias KersemansWim Van Paepegem

Stress-strain synchronization for high strain rate tests on brittle composites

Siebe SpronkErik VerbovenFrancisco Antonio Gilabert VillegasRuben SevenoisDavid Garoz GómezMathias KersemansWim Van Paepegem

A1 Journal Article in POLYMER TESTING

Tensile rate-dependency of carbon/epoxy and Glass/polyamide-6 composites

Siebe SpronkFrancisco Antonio Gilabert VillegasRuben SevenoisDavid Garoz GómezWim Van Paepegem

2017

Assessment of different meso-modelling techniques for 2D woven composites

Anna MatveevaSeyyed Ahmad TabatabaeiRuben SevenoisLaszlo FarkasWim Van PaepegemStepan Lomov

Investigating tensile rate-dependence in composite laminates using a hydraulic pulse test bench

Siebe SpronkFrancisco Antonio Gilabert VillegasRuben SevenoisDavid Garoz GómezWim Van Paepegem

MICROSCALE BASED PREDICTION OF MATRIX CRACK INITIATION IN UD COMPOSITE PLIES SUBJECTED TO MULTIAXIAL FATIGUE WITH ARBITRARY STRESS RATIOS

Ruben SevenoisSiebe SpronkDavid Garoz GómezFrancisco Antonio Gilabert VillegasWim Van Paepegem

Material parameter identification of the elementary ply damage mesomodel using virtual micro-mechanical tests of a carbon fiber epoxy system

David Garoz GómezFrancisco Antonio Gilabert VillegasRuben SevenoisSiebe SpronkWim Van Paepegem

A1 Journal Article in COMPOSITE STRUCTURES

Measurement Based Construction and Analysis of Realistic Representative Unit Cells for Textile Laminates.

Ruben SevenoisDavid Garoz GómezFrancisco Antonio Gilabert VillegasSiebe SpronkMathias KersemansWim Van Paepegem

Microscale based prediction of matrix crack initiation in UD composite plies subjected to multiaxial fatigue for all stress ratios and load levels

Ruben SevenoisDavid Garoz GómezFrancisco Antonio Gilabert VillegasSiebe SpronkWim Van Paepegem

A1 Journal Article in COMPOSITES SCIENCE AND TECHNOLOGY

2016

Avoiding interpenetrations and fibre volume fraction corrections in representative unit cells for textile composites through advanced geometry generation

Ruben SevenoisDavid Garoz GómezFrancisco Antonio Gilabert VillegasWim Van Paepegem

Avoiding interpenetrations and the importance of nesting in analytic geometry construction for Representative Unit Cells of woven composite laminates

Ruben SevenoisDavid Garoz GómezFrancisco Antonio Gilabert VillegasSiebe SpronkSander FonteynMarjolein HeyndrickxLincy PylDanny Van HemelrijckJoris DegrieckWim Van Paepegem

A1 Journal Article in COMPOSITES SCIENCE AND TECHNOLOGY

Composite micro-scale model accounting for debonding, strain-rate dependence and damage under impact using an explicit finite element solver

Francisco Antonio Gilabert VillegasDavid Garoz GómezRuben SevenoisSiebe SpronkAli RezaeiWim Van Paepegem

Definition of periodic boundary conditions in explicit dynamic simulations of micro- or meso-scale unit cells with conformal and non-conformal meshes

David Garoz GómezFrancisco Antonio Gilabert VillegasRuben SevenoisSiebe SpronkAli RezaeiWim Van Paepegem

Drop: weight impact response measurement and prediction for quasi - isotropic carbon - epoxy composite laminates

Ruben SevenoisSiebe SpronkJori De BaerdemaekerDavid Garoz GómezFrancisco Antonio Gilabert VillegasMathias KersemansChristos KassapoglouWim Van Paepegem

Fracture simulation of structural glass by element deletion in explicit FEM

Joren PelfreneSam Van DamRuben SevenoisFrancisco Antonio Gilabert VillegasWim Van Paepegem

Testing for tensile rate-dependence in composite laminates

Siebe SpronkMathijs DolphenIves De BaereFrancisco Antonio Gilabert VillegasRuben SevenoisDavid Garoz GómezWim Van PaepegemJoris Degrieck

Virtual material characterization process for composite materials: an industrial solution

Laszlo FarkasKristof VancloosterHunor ErdelyiRuben SevenoisStepan V LomovTadashi NaitoYuta UrushiyamaWim Van Paepegem

2015

Fatigue damage modeling techniques for textile composites: review and comparison with unidirectional composite modeling techniques

Ruben SevenoisWim Van Paepegem

A1 Journal Article in APPLIED MECHANICS REVIEWS

2014

Analytic methods for stress analysis of two-dimensional flat anisotropic plates with notches: an overview

Ruben SevenoisSotiris Koussios

A1 Journal Article in APPLIED MECHANICS REVIEWS