Manage settings
MENU
About this site
In het Nederlands
Home
Researchers
Projects
Organisations
Publications
Infrastructure
Contact
Research Explorer
Your browser does not support JavaScript or JavaScript is not enabled. Without JavaScript some functions of this webapplication may be disabled or cause error messages. To enable JavaScript, please consult the manual of your browser or contact your system administrator.
Researcher
Ives De Baere
Profile
Projects
Publications
Activities
Awards & Distinctions
197
Results
2025
Interlaminar fracture toughness behaviour of a repairable glass-fibre-reinforced vitrimer for wind-energy applications
Virginia Amfilochiou
Tapas Debsharma
Ives De Baere
Filip Du Prez
Wim Van Paepegem
A1
Journal Article
in
COMPOSITES PART B-ENGINEERING
2025
2024
Advanced hollow cathode discharge plasma treatment of unique bilayered fibrous nerve guidance conduits for enhanced/oriented neurite outgrowth
Sheida Aliakbarshirazi
Rouba Ghobeira
Mahtab Asadian
Mehrnoush Narimisa
Anton Nikiforov
Ives De Baere
Wim Van Paepegem
Nathalie De Geyter
Heidi Declercq
Rino Morent
A1
Journal Article
in
BIOMACROMOLECULES
2024
Contrast-enhanced imaging of carbon fiber composites using hafnium oxide nanocrystals
Eline Goossens
Ives De Baere
John De Vos
Evert Dhaene
Matthieu Boone
Isabel Van Driessche
Jonathan De Roo
Wim Van Paepegem
Klaartje De Buysser
C3
Conference
2024
Mechanical performance and reprocessing of siloxane-based, glass-fibre-reinforced vitrimers
Virginia Amfilochiou
Tapas Debsharma
Ives De Baere
Lode Daelemans
Filip Du Prez
Wim Van Paepegem
C1
Conference
2024
Study of the effect of defects on fatigue life prediction of additive manufactured Ti-6Al-4V by combined use of micro-computed tomography and fracture-mechanics-based simulation
Shiwei Han
Tien Dung Dinh
Ives De Baere
Matthieu Boone
Iván Josipovic
Wim Van Paepegem
A1
Journal Article
in
INTERNATIONAL JOURNAL OF FATIGUE
2024
Thermomechanical characterisation of reprocessable, siloxane-based, glass-fibre-reinforced vitrimers
Virginia Amfilochiou
Tapas Debsharma
Ives De Baere
Lode Daelemans
Filip Du Prez
Wim Van Paepegem
A1
Journal Article
in
COMPOSITES PART B-ENGINEERING
2024
2023
Damage characterization of multidirectional glass/polypropylene composite laminates in tension-tension fatigue
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
C3
Conference
2023
Experimental and numerical fatigue damage characterization in multidirectional thermoplastic glass/polypropylene laminates based on in-situ damage observations
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
A1
Journal Article
in
COMPOSITES PART B-ENGINEERING
2023
Fatigue behaviour of thermoplastic glass/polypropylene composite cross-ply laminates : an experimental study with in-situ damage observations and numerical validation
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
A1
Journal Article
in
COMPOSITES PART B-ENGINEERING
2023
Measurement of three-dimensional concentric and angular misalignment in static and fatigue testing of materials by stereo-digital image correlation
Shiwei Han
Tien Dung Dinh
Ives De Baere
Wim Van Paepegem
A1
Journal Article
in
EXPERIMENTAL MECHANICS
2023
Relation between ASTM E606 specimen geometry and misalignment in strain-controlled fatigue testing
Shiwei Han
Tien Dung Dinh
Ives De Baere
Wim Van Paepegem
A1
Journal Article
in
INTERNATIONAL JOURNAL OF FATIGUE
2023
Resorcinol-derived vitrimers and their flax fiber-reinforced composites based on fast siloxane exchange
Tapas Debsharma
Stéphanie Engelen
Ives De Baere
Wim Van Paepegem
Filip Du Prez
A1
Journal Article
in
MACROMOLECULAR RAPID COMMUNICATIONS
2023
2022
Damage characterization in multidirectional glass fibre reinforced polypropylene laminates under quasi-static loading : experiment & simulation
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
C1
Conference
2022
Experimental and numerical damage characterization of glass/polypropylene multidirectional laminates under quasi-static loading condition
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2022
Fast dynamic siloxane exchange mechanism for reshapable vitrimer composites
Tapas Debsharma
Virginia Amfilochiou
Aleksandra Alicja Wróblewska
Ives De Baere
Wim Van Paepegem
Filip Du Prez
A1
Journal Article
in
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
2022
Manufacturing and mechanical characterisation of advanced re-formable fibre-reinforced vitrimer composites
Virginia Amfilochiou
Tapas Debsharma
Ives De Baere
Filip Du Prez
Wim Van Paepegem
C1
Conference
2022
Manufacturing and mechanical characterisation of advanced re-formable fibre-reinforced vitrimer composites
Virginia Amfilochiou
Tapas Debsharma
Ives De Baere
Filip Du Prez
Wim Van Paepegem
C3
Conference
2022
2021
Long-term stiffness prediction of particle filled polymers by dynamic mechanical analysis : frequency sweep versus creep method
Joanna Schalnat
Lode Daelemans
Ives De Baere
Karen De Clerck
Wim Van Paepegem
A1
Journal Article
in
POLYMER TESTING
2021
Multi scale digital image correlation for automatic edge detection of ply cracks in composite laminates under quasi static and fatigue loading
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
C3
Conference
2021
Specimen preparation and qualitative damage assessment in continuous glass fibre reinforced P olypropylene under in plane fatigue
Josef Sommer
Mohammad Hajikazemi
Ives De Baere
Wim Van Paepegem
C3
Conference
2021
2020
Dynamic curing agents for amine-hardened epoxy vitrimers with short (re)processing times
Yann Spiesschaert
Marc Guerre
Ives De Baere
Wim Van Paepegem
Johan Winne
Filip Du Prez
A1
Journal Article
in
MACROMOLECULES
2020
Influencing parameters on measurement accuracy in dynamic mechanical analysis of thermoplastic polymers and their composites
Joanna Schalnat
David Garoz Gómez
Lode Daelemans
Ives De Baere
Karen De Clerck
Wim Van Paepegem
A1
Journal Article
in
POLYMER TESTING
2020
Laser welding of carbon fibre filled polytetra fluoroethylene
Matthias Herthoge
Jens De Pelsmaeker
Matthieu Boone
Ives De Baere
Wim Van Paepegem
Sandra Van Vlierberghe
A1
Journal Article
in
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
2020
The effect of a constant tensile load on the hydrogen diffusivity in dual phase steel by electrochemical permeation experiments
Emilie Van den Eeckhout
Ives De Baere
Tom Depover
Kim Verbeken
A1
Journal Article
in
MATERIALS SCIENCE AND ENGINEERING A - STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
2020
2019
One-shot production of large-scale 3D woven fabrics with integrated prismatic shaped cavities and their applications
Ruben Geerinck
Ives De Baere
Geert De Clercq
Lode Daelemans
Jan Ivens
Karen De Clerck
A1
Journal Article
in
MATERIALS & DESIGN
2019
2018
Assessement of urea based vitrimers as a new matrix material for fibre reinforced polymers
Ives De Baere
Wim Denissen
Wim Van Paepegem
Johan Winne
Filip Du Prez
C1
Conference
2018
Development of a test rig and a testing procedure for bicycle frame stiffness measurements
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
A2
Journal Article
in
SPORTS ENGINEERING
2018
Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates
Lode Daelemans
Amaël Cohades
Timo Meireman
Jasper Beckx
Siebe Spronk
Mathias Kersemans
Ives De Baere
Hubert Rahier
Véronique Michaud
Wim Van Paepegem
et al.
A1
Journal Article
in
MATERIALS & DESIGN
2018
Vinylogous urea vitrimers and their application in fiber reinforced composites
Wim Denissen
Ives De Baere
Wim Van Paepegem
Ludwik Leibler
Johan Winne
Filip Du Prez
A1
Journal Article
in
MACROMOLECULES
2018
2017
Electrospun nanofibers for highly toughened fibre reinforced polymer composite laminates
Lode Daelemans
Timo Meireman
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C1
Conference
2017
Enhancing the performance of persistent phosphors : focus on the trapping defects and detrapping processes
Philippe Smet
Katleen Korthout
Claude Tydtgat
David Van der Heggen
Simon Michels
Dirk Poelman
Ives De Baere
Mathias Kersemans
C3
Conference
2017
Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Journal Article
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2017
Interlaminar toughening of resin transfer molded laminates by electrospun polycaprolactone structures : effect of the interleave morphology
Timo Meireman
Sam van der Heijden
Lode Daelemans
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
P1
Conference
2017
Interlaminar toughening of resin transfer moulded laminates by electrospun polycaprolactone : effect of interleave morphology
Timo Meireman
Sam van der Heijden
Lode Daelemans
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C3
Conference
2017
Nano-engineering highly toughened fibre reinforced polymer composites by interleaving electrospun nanofibres for advanced applications
Lode Daelemans
Timo Meireman
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C3
Conference
2017
Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers
Sam van der Heijden
Lode Daelemans
Kevin De Bruycker
Robin Simal
Ives De Baere
Wim Van Paepegem
Hubert Rahier
Karen De Clerck
A1
Journal Article
in
COMPOSITE STRUCTURES
2017
On the visco-elasto-plastic response of additively manufactured polyamide-12 (PA-12) through selective laser sintering
Nicolas Lammens
Mathias Kersemans
Ives De Baere
Wim Van Paepegem
A1
Journal Article
in
POLYMER TESTING
2017
PRODUCTION AND EVALUATION OF COMPOSITES CONSISTING OF WOVEN FABRICS WITH INTEGRATED PRISMATIC SHAPED CAVITIES
Ruben Geerinck
Ives De Baere
Geert De Clercq
Wouter De Corte
Karen De Clerck
Jan Ivens
Joris Degrieck
C3
Conference
2017
Woven fabrics with integrated prismatic shaped cavities for technical applications
Ruben Geerinck
Ives De Baere
Geert De Clercq
Alessandro Proia
Stijn Matthys
Jan Ivens
Karen De Clerck
C1
Conference
2017
2016
Assessment of composites reinforced with innovative 3D Woven hollow fabrics
Ruben Geerinck
Ives De Baere
Geert De Clercq
Jan Ivens
Joris Degrieck
C1
Conference
2016
DEVELOPMENT OF A DEDICATED BENDING SET-UP FOR QUALITY CONTROL OF LIGHTWEIGHT 3D-PRINTED POLYAMIDE-12 STRUCTURES
Nicolas Lammens
Ives De Baere
Wim Van Paepegem
C3
Conference
2016
Damage-resistant composites using electrospun nanofibers: a multiscale analysis of the toughening mechanisms
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Journal Article
in
ACS APPLIED MATERIALS & INTERFACES
2016
Development and characterization of composites consisting of woven fabrics with integrated prismatic shaped cavities
Ruben Geerinck
Ives De Baere
Geert De Clercq
J Ivens
Joris Degrieck
C1
Conference
2016
Development and characterization of composites consisting of woven fabrics with integrated prismatic shaped cavities
Ruben Geerinck
Ives De Baere
Geert De Clercq
Jan Ivens
Joris Degrieck
C1
Conference
2016
Effective use of transient vibration damping results for non-destructive measurements of fibre-matrix adhesion of fibre-reinforced flax and carbon composites
Joachim Vanwalleghem
Ives De Baere
Sofie Huysman
Linsey Lapeire
Kim Verbeken
Alexandru Nila
Steve Vanlanduit
Mia Loccufier
Wim Van Paepegem
A1
Journal Article
in
POLYMER TESTING
2016
Increasing the damage resistance of composites by interleaving them with electrospun nanofibrous veils
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C1
Conference
2016
Interlaminar toughening of resin transfer molded laminates by electrospun polycaprolactone structures : effect of the interleave morphology
Sam van der Heijden
Lode Daelemans
Timo Meireman
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2016
Mechanical response of 3D-printed lightweight polyamide-12 lattice structures
Nicolas Lammens
Ives De Baere
Wim Van Paepegem
C3
Conference
2016
On the orthotropic elasto-plastic material response of additively manufactured polyamide 12
Nicolas Lammens
Ives De Baere
Wim Van Paepegem
C1
Conference
2016
On the orthotropy of 3D-printed polyamide 12
Ives De Baere
Nicolas Lammens
Wim Van Paepegem
C3
Conference
2016
TOWARDS DAMAGE RESISTANT COMPOSITES USING ELECTROSPUN NANOFIBERS: A MULTISCALE ANALYSIS OF THE TOUGHENING MECHANISMS
Sam van der Heijden
Lode Daelemans
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C3
Conference
2016
TOWARDS DAMAGE RESISTANT COMPOSITES USING ELECTROSPUN NANOFIBERS: A MULTISCALE ANALYSIS OF THE TOUGHENING MECHANISMS
Sam van der Heijden
Lode Daelemans
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
C3
Conference
2016
Testing for tensile rate-dependence in composite laminates
Siebe Spronk
Mathijs Dolphen
Ives De Baere
Francisco Antonio Gilabert Villegas
Ruben Sevenois
David Garoz Gómez
Wim Van Paepegem
Joris Degrieck
C1
Conference
2016
Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2016
2015
Added value of micro-tomography measurements in mechanical characterization of materials: some case studies in engineering applications
Wim Van Paepegem
Lode Daelemans
Joren Pelfrene
Ives De Baere
Nicolas Lammens
Gabriele Chiesura
Geert Luyckx
Stefan Jacques
Joachim Vanwalleghem
Joris Degrieck
C3
Conference
2015
Analysis of the numerical and geometrical parameters influencing the simulation of mode I and mode II delamination growth in unidirectional and textile composites
Stefan Jacques
Ives De Baere
Wim Van Paepegem
A1
Journal Article
in
APPLIED COMPOSITE MATERIALS
2015
Assessement of different techniques for adding thermoplastic matrixmaterial in the reinforcement structures
Ruben Geerinck
Ives De Baere
Geert De Clercq
Jan Ivens
Joris Degrieck
C1
Conference
2015
Bisphenol A based polyester binder as an effective interlaminar toughener
Lode Daelemans
Sam van der Heijden
Ives De Baere
Irfan Muhammad
Wim Van Paepegem
Hubert Rahier
Karen De Clerck
A1
Journal Article
in
COMPOSITES PART B-ENGINEERING
2015
Direct fracture toughness determination of a ductile epoxy polymer from digital image correlation measurements on a single edge notched bending sample
Klaas Allaer
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER TESTING
2015
Dynamic calibration of a strain gauge based handlebar force sensor for cycling purposes
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conference
2015
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres
Sam van der Heijden
Lode Daelemans
Ives De Baere
Huber Rahier
Wim Van Paepegem
Karen De Clerck
C1
Conference
2015
Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veils
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2015
The influence of mechanical test parameters on the outcome of the end notch flexure test for mode II fracture toughness
Ives De Baere
Stefan Jacques
Wim Van Paepegem
P1
Conference
2015
Using a polyester binder for the interlaminar toughening of glass/epoxy composite laminates
Lode Daelemans
Sam van der Heijden
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
P1
Conference
2015
2014
A comparison between the experimental and theoretical impact pressures acting on a horizontal quasi-rigid cylinder during vertical water entry
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Pascal Lave
Mathias Kersemans
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
A1
Journal Article
in
OCEAN ENGINEERING
2014
Application of periodic boundary conditions on multiple part finite element meshes for the meso-scale homogenization of textile fabric composites
Stefan Jacques
Ives De Baere
Wim Van Paepegem
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2014
Bulk mechanical properties of thermoplastic poly-e-caprolactone
Kim Ragaert
Ives De Baere
Ludwig Cardon
Joris Degrieck
C1
Conference
2014
Damage signature of fatigued fabric reinforced plastics in the pulsed ultrasonic polar scan
Mathias Kersemans
Ives De Baere
Joris Degrieck
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
A1
Journal Article
in
EXPERIMENTAL MECHANICS
2014
Development of a multi-directional rating test method for bicycle frame stiffness
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
C3
Conference
2014
Development of a multi-directional rating test method for bicycle stiffness
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conference
2014
Experimental study of the slamming induced pressures, forces and deformations of quasi-rigid and deformable bodies during vertical water entry
Diederik Van Nuffel
Wim Van Paepegem
Ives De Baere
Dissertation
2014
External damping losses in measuring the vibration damping properties in lightly damped specimens using transient time-domain methods
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
A1
Journal Article
in
JOURNAL OF SOUND AND VIBRATION
2014
Field tests with an instrumented bicycle for comfort measurements
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
C3
Conference
2014
In-plane mechanical properties of ductile composites with unidirectional stainless steel fibre reinforced layers
Klaas Allaer
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2014
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres
Sam van der Heijden
Lode Daelemans
Bert De Schoenmaker
Ives De Baere
Hubert Rahier
Wim Van Paepegem
Karen De Clerck
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2014
New approach for the construction of meso-scale finite element models of textile composites with periodic boundary conditions
Stefan Jacques
Ives De Baere
Wim Van Paepegem
C1
Conference
2014
Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan
Mathias Kersemans
Ives De Baere
Joris Degrieck
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
A1
Journal Article
in
POLYMER TESTING
2014
Obtaining a through the thickness reinforced composite joint
Ives De Baere
Marino Quaresimin
Joris Degrieck
Wim Van Paepegem
C3
Conference
2014
On the in-plane mechanical properties of stainless steel fibre reinforced ductile composites
Klaas Allaer
Ives De Baere
Pascal Lava
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2014
Study of the interlaminar quasi-static and fatigue behaviour of a carbon PPS using the single lapshear geometry
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2014
Ultrasonic polar scan imaging of fatigued fiber reinforced composites
Mathias Kersemans
Ives De Baere
Joris Degrieck
Koen Van Den Abeele
Lincy Pyl
Filip Zastavnik
Hugo Sol
Wim Van Paepegem
C1
Conference
2014
2013
Accurate measurement of high strain gradients in micro-strain applications with 2D digital image correlation
Pascal Lava
Wim Van Paepegem
Sam Coppieters
Ives De Baere
Dimitri Debruyne
P1
Conference
2013
Assessment of the interlaminar behaviour of a carbon fabric reinforced thermoplastic lap shear specimen under quasi-static and tension-tension fatigue loading
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER TESTING
2013
Changes in mechanical behaviour of a glass fibre reinforced epoxy by adding polyamide 6 nanofibres
Ives De Baere
Bert De Schoenmaker
Sam van der Heijden
Wim Van Paepegem
Karen De Clerck
C3
Conference
2013
Design and thermoregulation of a new microextrusion dispense head for 3D-plotting of thermally sensitive thermoplastics
Kim Ragaert
Ives De Baere
Marcel Moerman
Ludwig Cardon
Joris Degrieck
A1
Journal Article
in
POLYMER ENGINEERING AND SCIENCE
2013
Effect of electrospun polyamide 6 nanofibres on the mechanical properties of a glass fibre/epoxy composite
Bert De Schoenmaker
Sam van der Heijden
Ives De Baere
Wim Van Paepegem
Karen De Clerck
A1
Journal Article
in
POLYMER TESTING
2013
Fatigue and post-fatigue stress-strain analysis of a 5-harness satin weave carbon fibre reinforced composite
S Daggumati
Ives De Baere
Wim Van Paepegem
Joris Degrieck
J Xu
SV Lomov
Ignace Verpoest
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2013
Impact of lens distortions on strain measurements obtained with 2D digital image correlation
Pascal Lava
Wim Van Paepegem
S Coppieters
Ives De Baere
Y Wang
D Debruyne
A1
Journal Article
in
OPTICS AND LASERS IN ENGINEERING
2013
Modifying the crack growth in a glass fiber reinforced epoxy by adding polyamide 6 nanofibers
Ives De Baere
Bert De Schoenmaker
Sam van der Heijden
Wim Van Paepegem
Karen De Clerck
C1
Conference
2013
Newo approach for the construction of meso-scale finite element models of textile composites with periodic boundary conditions
Stefan Jacques
Ives De Baere
Wim Van Paepegem
C1
Conference
2013
Sensor design for outdoor racing bicycle field testing for human vibration comfort evaluation
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
A1
Journal Article
in
MEASUREMENT SCIENCE & TECHNOLOGY
2013
Slamming wave impact on cylindrical structures: model tests including a rigid and deformable cylinder
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Julien De Rouck
Wim Van Paepegem
Joris Degrieck
C1
Conference
2013
Sress-strain analysis of a carbon PPS during and after fatigue loading conditions
Wim Van Paepegem
Ives De Baere
Subareddy Daggumati
Christian Hochard
J Xu
Stepan Lomov
Ignace Verpoest
Joris Degrieck
C3
Conference
2013
Static and fatigue behaviour of a satin weave carbon/PPS thermoplastic composite : experimental results and validation with meso-scale modelling
Wim Van Paepegem
Ives De Baere
Subbareddy Daggumati
Mathias Kersemans
Jian Xu
Stepan Lomov
Ignaas Verpoest
Joris Degrieck
C1
Conference
2013
Study on the parameters influencing the accuracy and reproducibility of dynamic pressure measurements at the surface of a rigid body during water impact
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
A1
Journal Article
in
EXPERIMENTAL MECHANICS
2013
The effect of electrospun polyamide 6 nanofibres on the mechanical properties of a glass fibre/epoxy composite
Bert De Schoenmaker
Sam van der Heijden
Ives De Baere
Wim Van Paepegem
Karen De Clerck
C3
Conference
2013
The use of nanofibre structures in fibre-reinforced composites: challenges and opportunities
Karen De Clerck
Sam van der Heijden
Bert De Schoenmaker
Ives De Baere
Wim Van Paepegem
Hubert Rahier
C3
Conference
2013
The use of nanofibre structures in fibre-reinforced composites: challenges and opportunities
Karen De Clerck
Sam van der Heijden
Bert De Schoenmaker
Ives De Baere
Wim Van Paepegem
Hubert Rahier
C1
Conference
2013
2012
An experimental comparison of vertical water enty between a rigid cylindrical body and a deformable cylindrical composite shell
Diederik Van Nuffel
Ives De Baere
Julien De Rouck
Joris Degrieck
Wim Van Paepegem
P1
Conference
2012
Assessment of the infrared welding process for a carbon fabric reinforced pps
Klaas Allaer
Ives De Baere
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
C1
Conference
2012
Calibration of dynamic piezoelectric force transducers using the hopkinson bar technique
Diederik Van Nuffel
Jan Peirs
Ives De Baere
Patricia Verleysen
Joris Degrieck
Wim Van Paepegem
P1
Conference
2012
Calibration of dynamic piezoelectric force transducers using the hopkinson bar technique
Diederik Van Nuffel
Jan Peirs
Ives De Baere
Patricia Verleysen
Joris Degrieck
Wim Van Paepegem
C3
Conference
2012
Design of an instrumented bicycle for the evaluation of bicycle dynamics and its relation with the cyclist's comfort
Joachim Vanwalleghem
Frederik Mortier
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conference
2012
Experimental assesment of infrared welded bonds using lapshear, double cantilever beam and end notch flexure tests for a carbon fabric reinforced thermoplastic
Klaas Allaer
Ives De Baere
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
C3
Conference
2012
Experimental assesment of infrared welded bonds using lapshear, double cantilever beam and end notch flexure tests for a carbon fabric reinforced thermoplastic
Klaas Allaer
Ives De Baere
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
P1
Conference
2012
Experimental study of the crack growth of a carbon fabric reinforced PPS under mode I and mode II loading conditions
Ives De Baere
Stefan Jacques
Mathias Kersemans
Wim Van Paepegem
Joris Degrieck
C3
Conference
2012
Experimental study of the crack growth of a carbon fabric reinforced PPS under mode I and mode II loading conditions
Ives De Baere
Stefan Jacques
Mathias Kersemans
Wim Van Paepegem
Joris Degrieck
P1
Conference
2012
Experimental study on the impact loads acting on a horizontal rigid cylinder during vertical water entry
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
P1
Conference
2012
Fatigue behaviour of infrared welded joints in fibre reinforced thermoplastics
Ives De Baere
Klaas Allaer
Wim Van Paepegem
Joris Degrieck
C1
Conference
2012
Feasibility study of fusion bonding for carbon fabric reinforced Polyphenylene Sulphide by hot-tool welding
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
2012
Flexural mechanical properties of porcine aortic heart valve leaflets
Kim Ragaert
Filip De Somer
Pamela Somers
Ives De Baere
Ludwig Cardon
Joris Degrieck
A1
Journal Article
in
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
2012
Impact of lens distrortions on strain measurements obtained with digital image correlation
P Lava
S Coppieters
D Debruyne
Wim Van Paepegem
Ives De Baere
C1
Conference
2012
Implications of structural discontinuities for water coupled NDT and SHM: experiment and modeling
Mathias Kersemans
Koen Van Den Abeele
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C3
Conference
2012
Influence of specimen geometry on the fatigue behavior of a carbon fabric reinforced pps
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2012
Infrared welding of carbon fabric reinforced thermoplastics
Klaas Allaer
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A4
Journal Article
in
JEC COMPOSITES
2012
Instrumentation of a racing bicycle for outdoor field testing and evaluation of the cyclist's comfort perception
Joachim Vanwalleghem
Frederik Mortier
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conference
2012
Instrumentation of a racing bicycle for outdoor field testing and evaluation of the cyclist's comfort perception
Joachim Vanwalleghem
Frederik Mortier
Ives De Baere
Mia Loccufier
Wim Van Paepegem
C3
Conference
2012
Interlaminar behavior of infrared welded joints of carbon fabric-reinforced polyphenylene sulfide
Ives De Baere
Klaas Allaer
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER COMPOSITES
2012
Mechanoluminescence in BaSi2O2N2:Eu
Jonas Botterman
Koen Van den Eeckhout
Ives De Baere
Dirk Poelman
Philippe Smet
A1
Journal Article
in
ACTA MATERIALIA
2012
Polar scan technique for material characterization and identification of new operating regimes
Mathias Kersemans
Wim Van Paepegem
Diederik Van Nuffel
Geert Luyckx
Ives De Baere
Filip Zastavnik
Jun Gu
Hugo Sol
Koen Van Den Abeele
Joris Degrieck
C1
Conference
2012
Polar scan technique for material characterization and identification of new operating regimes
Mathias Kersemans
Wim Van Paepegem
Diederik Van Nuffel
Geert Luyckx
Ives De Baere
Filip Zastavnik
Jun Gu
Hugo Sol
Koen Van Den Abeele
Joris Degrieck
P1
Conference
2012
Practical aspects in measuring vibration damping of materials
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
C3
Conference
2012
Practical aspects in measuring vibration damping of materials
Joachim Vanwalleghem
Ives De Baere
Mia Loccufier
Wim Van Paepegem
P1
Conference
2012
Slamming wave impact on cylindrical structures: model tests including a rigid and deformable cylinder
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Julien De Rouck
Wim Van Paepegem
Joris Degrieck
C3
Conference
2012
Study of the mode I and mode II interlaminar behaviour of a carbon fabric reinforced thermoplastic
Ives De Baere
Stefan Jacques
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER TESTING
2012
The in-plane shear behaviour of a carbon fabric reinforced thermoplastic under quasi-static and fatigue loading conditions
Ives De Baere
Wim Van Paepegem
Joris Degrieck
Bookchapter
in
Fiber-reinforced composites
2012
The influence of polyamide 6 nanofibres on the mechanical properties of glass fibre/epoxy composites
Bert De Schoenmaker
Ives De Baere
Wim Van Paepegem
Karen De Clerck
C3
Conference
2012
2011
COMET: new dispense head system for micro-extrusion of thermoplastics
Kim Ragaert
Marcel Moerman
Ives De Baere
Ludwig Cardon
Joris Degrieck
C3
Conference
2011
Experimental and numerical polar scans of several anisotropic materials using pulsed and harmonic ultrasonic beams
Mathias Kersemans
Ives De Baere
Wim Van Paepegem
Joris Degrieck
Filip Zastavnik
Jun Gu
Hugo Sol
P1
Conference
2011
Experimentally induced errors in digital image correlation measurement of small strains with large gradients
Ives De Baere
Wim Van Paepegem
Nicolas Lammens
Pascal Lava
Dimitri Debruyne
Corneliu Cofaru
Wilfried Philips
Joris Degrieck
P1
Conference
2011
Fusion bonding of carbon fabric reinforced polyphenylene sulphide
Ives De Baere
Wim Van Paepegem
Joris Degrieck
P1
Conference
2011
In-situ local strain measurement in textile composites with embedded optical fibre sensors
Subareddy Daggumati
Eli Voet
Ives De Baere
Wim Van Paepegem
Joris Degrieck
J Xu
S Lomov
I Verpoest
P1
Conference
2011
Macro-mechanical and microscopic study of the fatigue damage behaviour of a carbon fabric/PPS thermoplastic composite
Ives De Baere
Linsey Lapeire
Wim Van Paepegem
Subareddy Daggumati
Kim Verbeken
Joris Degrieck
C1
Conference
2011
Modeling and microstructural analysis of temperature effects in fused silica viewport
Marijke Jacobs
Guido Van Oost
Joris Degrieck
Ives De Baere
Andrei Gusarov
Vincent Massaut
A1
Journal Article
in
FUSION ENGINEERING AND DESIGN
2011
New double indentation technique for measurement of the elasticity modulus of thin objects
Joris Soons
Ives De Baere
Joris Dirckx
A1
Journal Article
in
EXPERIMENTAL MECHANICS
2011
On the (fatigue) damage behaviour of a carbon-reinforced PPS
Ives De Baere
Wim Van Paepegem
Subbareddy Daggumati
Linsey Lapeire
Kim Verbeken
Joris Degrieck
C3
Conference
2011
On the tension-tension fatigue behaviour of a carbon reinforced thermoplastic part I: limitations of the ASTM D3039/D3479 standard
Ives De Baere
Wim Van Paepegem
Marino Quaresimin
Joris Degrieck
A1
Journal Article
in
POLYMER TESTING
2011
On the tension-tension fatigue behaviour of a carbon reinforced thermoplastic part II: evaluation of a dumbbell-shaped specimen
Ives De Baere
Wim Van Paepegem
Christian Hochard
Joris Degrieck
A1
Journal Article
in
POLYMER TESTING
2011
Parameters affecting the pressure measurements on the surface of a rigid cylindrical body during water slamming impact
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
C1
Conference
2011
Pressure measurement on the surface of a rigid cylindrical body during slamming wave impact
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Julien De Rouck
Wim Van Paepegem
P1
Conference
2011
Production & evaluation of PCL scaffolds for tissue engineered heart valves
Kim Ragaert
Filip De Somer
Ives De Baere
Ludwig Cardon
Joris Degrieck
A2
Journal Article
in
ADVANCES IN PRODUCTION ENGINEERING AND MANAGEMENT
2011
Scientific research on the dynamic and static properties of hybrid flax-carbon bicycle racing frames
Joachim Vanwalleghem
Wim Van Paepegem
Ives De Baere
Mia Loccufier
Joris Degrieck
C3
Conference
2011
Slamming wave impact of a composite buoy for wave energy applications: design and large-scale testing
Wim Van Paepegem
Chris Blommaert
Ives De Baere
Joris Degrieck
Griet De Backer
Julien De Rouck
Joris Degroote
Jan Vierendeels
Stijn Matthys
Luc Taerwe
A1
Journal Article
in
POLYMER COMPOSITES
2011
Tensile properties of thin-sheet metals after cyclic damage
Jesus Galan Lopez
Patricia Verleysen
Ives De Baere
Joris Degrieck
P1
Conference
2011
Testing and modeling of diffusion bonded prototype optical windows under ITER conditions
Marijke Jacobs
Guido Van Oost
Joris Degrieck
Ives De Baere
Andrei Gusarov
Frits Gubbels
Vincent Massaut
C1
Conference
2011
2010
An experimental study on repetitive slamming wave impact on deformable composite structures
Diederik Van Nuffel
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C3
Conference
2010
Effect of flax fibre reinforcement on the riding comfort of composite racing bicycle frames
Amit Ghosh
Ives De Baere
Joachim Vanwalleghem
Joeri De Thaeye
Wim Van Paepegem
Joris Degrieck
C3
Conference
2010
Electrical resistance measurement for in-situ monitoring of fatigue of carbon fabric composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
INTERNATIONAL JOURNAL OF FATIGUE
2010
Evaluation of local strain distribution in a satin weave composite using fibre Bragg gratings
Eli Voet
Subbareddy Daggumati
Geert Luyckx
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2010
Finite element modeling of thermal stress in ITER prototype optical windows and its influencing parameters
Marijke Jacobs
Guido Van Oost
Joris Degrieck
Ives De Baere
Andrei Goussarov
Vincent Massaut
C1
Conference
2010
Local damage in a 5-harness satin weave composite under static tension, part I: experimental analysis
Subbareddy Daggumati
Ives De Baere
Wim Van Paepegem
Joris Degrieck
J Xu
SV Lomov
I Verpoest
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2010
Modelling the (damage) mechanics of textile composites with the aid of micro-tomography measurements
Wim Van Paepegem
Ives De Baere
Subbareddy Daggumati
Geert Luyckx
Manuel Dierick
Denis Van Loo
Veerle Cnudde
C3
Conference
2010
Monitoring quasi-static and cyclic fatigue damage in fibre-reinforced plastics by Poisson's ratio evolution
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Joris Degrieck
A1
Journal Article
in
INTERNATIONAL JOURNAL OF FATIGUE
2010
On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2010
Pre-fatigue influence on quasi-static tensile properties of Ti-6Al-4V in thin-sheet form
Jesus Galan Lopez
Patricia Verleysen
Ives De Baere
Joris Degrieck
P1
Conference
2010
Slamming wave impact on a rigid cylindrical body : comparison of experimental research and numerical simulation
Diederik Van Nuffel
Kameswara Vepa
Ives De Baere
Joris Degrieck
Wim Van Paepegem
Jan Vierendeels
C1
Conference
2010
2009
Comparison of different setups for fatigue testing of thin composite laminates in bending
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
INTERNATIONAL JOURNAL OF FATIGUE
2009
Fatigue and impact testing of textile reinforced thermoplastic composites for aerospace applications
Wim Van Paepegem
Ives De Baere
Joris Degrieck
C1
Conference
2009
Fatigue testing of fibre reinforced thermoplastics : different testing and instrumentation strategies
Wim Van Paepegem
Ives De Baere
Joris Degrieck
C1
Conference
2009
Fusion bonding of carbon fabric reinforced polyphenylene sulphide by hot-tool welding
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2009
High strain monitoring during fatigue loading of thermoplastic composites using imbedded draw tower fibre bragg grating sensors
Eli Voet
Geert Luyckx
Ives De Baere
Joris Degrieck
J Vlekken
Edgard Jacobs
Hartmut Bartelt
P1
Conference
2009
Large scale slamming tests on composite buoys for wave energy applications
Chris Blommaert
Wim Van Paepegem
P Dhondt
Griet De Backer
Joris Degrieck
Julien De Rouck
Marc Vantorre
Joost Van Slycken
Ives De Baere
Hans De Backer
et al.
C1
Conference
2009
Meso-scale modeling in thermoplastic 5-harness satin weave composite
Subbareddy Daggumati
Ives De Baere
Wim Van Paepegem
Joris Degrieck
J Xu
SM Lomov
I Verpoest
C1
Conference
2009
Modelling the nonlinear shear stress-strain behavior of a carbon fabric reinforced polyphenylene sulphide from rail shear and [(+45°,-45°)]4s tensile test
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER COMPOSITES
2009
On the design of end tabs for quasi-static and fatigue testing of fibre-reinforced composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER COMPOSITES
2009
On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions
Ives De Baere
Geert Luyckx
Eli Voet
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
OPTICS AND LASERS IN ENGINEERING
2009
On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic, part I: influence of the sensor
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER TESTING
2009
On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic, part II: analytical explanation
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER TESTING
2009
2008
A clamped three-point bending setup for fatigue of thin composite laminates
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2008
A modified three-rail shear test for fatigue of composite laminates
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2008
Comparison of the modified three-rail shear test and the [(+45 degrees,-45 degrees)](ns) tensile test for pure shear fatigue loading of carbon fabric thermoplastics
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
2008
Design of a modified three-rail shear test for shear fatigue of composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER TESTING
2008
Design of mechanical clamps with extra long wedge grips for static and fatigue testing of composite materials in tension and compression
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
EXPERIMENTAL TECHNIQUES
2008
Electrical resistance measurement on carbon fiber-reinforced thermoplastics with rivets as electrodes
Ives De Baere
Wim Van Paepegem
Joris Degrieck
P1
Conference
2008
Experimental and numerical study of different setups for conducting and monitoring fatigue experiments of fibre-reinforced thermoplastics
Ives De Baere
Wim Van Paepegem
Joris Degrieck
Dissertation
2008
Fatigue testing of carbon fabric thermoplastics: different testing and instrumentation strategies.
Ives De Baere
Wim Van Paepegem
Eli Voet
Joris Degrieck
C1
Conference
2008
High strain measurements during fatigue cycling in fibre reinforced thermoplastic composites using imbedded draw tower fibre Bragg grating sensors
Eli Voet
Geert Luyckx
Ives De Baere
Joris Degrieck
H Bartelt
J Vlekken
E Jacobs
C1
Conference
2008
Monitoring of a curved beam test structure using Bragg sensors
Geert Luyckx
Joris Degrieck
Ives De Baere
Wim De Waele
Wim Van Paepegem
T Verbeke
P1
Conference
2008
On the feasibility of a three-point bending setup for the validation of (fatigue) damage models for thin composite laminates
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
POLYMER COMPOSITES
2008
Research directions in the fatigue testing of polymer composites
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Geert Luyckx
Joris Degrieck
Bookchapter
in
Composite Materials Research Progress
2008
The use of optical fibers for fatigue testing of fiber-reinforced thermoplastics
Ives De Baere
Geert Luyckx
Wim Van Paepegem
Joris Degrieck
Eli Voet
J Vlekken
P1
Conference
2008
2007
Analysis of a curved composite test specimen with Fibre Bragg gratings
Geert Luyckx
Ives De Baere
Wim De Waele
Wim Van Paepegem
J Vlekken
T Verbeke
C1
Conference
2007
Comparison of different identification techniques for measurement of quasi-zero Poisson's ratio of fabric-reinforced laminates
Ives De Baere
Wim Van Paepegem
Joris Degrieck
H SOL
D VAN HEMELRIJCK
A PETRELI
A1
Journal Article
in
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
2007
Comparison of different set-ups for fatigue testing of thin composite laminates in bending
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2007
Electrical resistance measurement for in-situ monitoring of fatigue of carbon fabric composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2007
Monitoring fatigue damage in fibre-reinforced plastics through the Poisson's ratio degradation
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Joris Degrieck
C1
Conference
2007
Numerical modelling of fatigue in textile polymer composites
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Geert Luyckx
Joris Degrieck
Bookchapter
in
Computational & experimental analysis of damaged materials
2007
On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions
Ives De Baere
Eli Voet
Wim Van Paepegem
J Vlekken
Veerle Cnudde
Bert Masschaele
Joris Degrieck
C1
Conference
2007
Poisson's ratio as a sensitive indicator of (fatigue) damage in fibre-reinforced plastics
Wim Van Paepegem
Ives De Baere
Ebrahim Lamkanfi
Joris Degrieck
A1
Journal Article
in
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
2007
Strain monitoring in thermoplastic composites with optical fiber sensors: embedding process, visualization with micro-tomography, and fatigue results
Ives De Baere
Eli Voet
Wim Van Paepegem
J Vlekken
Veerle Cnudde
Bert Masschaele
Joris Degrieck
A1
Journal Article
in
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
2007
The use of rivets for electrical resistance measurement on carbon fibre-reinforced thermoplastics
Ives De Baere
Wim Van Paepegem
Joris Degrieck
A1
Journal Article
in
SMART MATERIALS & STRUCTURES
2007
2006
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2006
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part I: Experimental results
Wim Van Paepegem
Ives De Baere
Joris Degrieck
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2006
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part II: Model development and finite element simulations
Wim Van Paepegem
Ives De Baere
Joris Degrieck
A1
Journal Article
in
COMPOSITES SCIENCE AND TECHNOLOGY
2006
Monitoring of fatigue, impact and wear in Cetex TPC
Joris Degrieck
Wim Van Paepegem
Veerle Cnudde
Ives De Baere
Patrick De Baets
Nico Declercq
Geert Luyckx
Bert Masschaele
Alexander Moentjens
Jan Quintelier
et al.
C1
Conference
2006
2005
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2005
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites
Ives De Baere
Wim Van Paepegem
Joris Degrieck
C1
Conference
2005